All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Henrique Barboza <danielhb413@gmail.com>
To: qemu-devel@nongnu.org
Cc: qemu-ppc@nongnu.org, danielhb413@gmail.com,
	peter.maydell@linaro.org, richard.henderson@linaro.org,
	"BALATON Zoltan" <balaton@eik.bme.hu>,
	"Cédric Le Goater" <clg@kaod.org>
Subject: [PULL 60/60] ppc4xx: Fix code style problems reported by checkpatch
Date: Wed, 31 Aug 2022 15:50:34 -0300	[thread overview]
Message-ID: <20220831185034.23240-61-danielhb413@gmail.com> (raw)
In-Reply-To: <20220831185034.23240-1-danielhb413@gmail.com>

From: BALATON Zoltan <balaton@eik.bme.hu>

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <62798fbe9c200da3e0c870601ed9162b1c3a50a5.1660746880.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
---
 hw/ppc/ppc405_uc.c     |  5 +++--
 hw/ppc/ppc440_bamboo.c | 27 ++++++++++++++----------
 hw/ppc/ppc440_uc.c     |  3 ++-
 hw/ppc/ppc4xx_devs.c   | 48 +++++++++++++++++++++++-------------------
 hw/ppc/ppc4xx_pci.c    | 31 +++++++++++++++++----------
 5 files changed, 67 insertions(+), 47 deletions(-)

diff --git a/hw/ppc/ppc405_uc.c b/hw/ppc/ppc405_uc.c
index 74d27250a7..2ca42fdef6 100644
--- a/hw/ppc/ppc405_uc.c
+++ b/hw/ppc/ppc405_uc.c
@@ -540,10 +540,11 @@ static void ppc4xx_gpt_set_irqs(Ppc405GptState *gpt)
 
     mask = 0x00008000;
     for (i = 0; i < 5; i++) {
-        if (gpt->is & gpt->im & mask)
+        if (gpt->is & gpt->im & mask) {
             qemu_irq_raise(gpt->irqs[i]);
-        else
+        } else {
             qemu_irq_lower(gpt->irqs[i]);
+        }
         mask = mask >> 1;
     }
 }
diff --git a/hw/ppc/ppc440_bamboo.c b/hw/ppc/ppc440_bamboo.c
index b14a9ef776..ea945a1c99 100644
--- a/hw/ppc/ppc440_bamboo.c
+++ b/hw/ppc/ppc440_bamboo.c
@@ -84,27 +84,30 @@ static int bamboo_load_device_tree(hwaddr addr,
 
     ret = qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property,
                            sizeof(mem_reg_property));
-    if (ret < 0)
+    if (ret < 0) {
         fprintf(stderr, "couldn't set /memory/reg\n");
-
+    }
     ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start",
                                 initrd_base);
-    if (ret < 0)
+    if (ret < 0) {
         fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n");
-
+    }
     ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end",
                                 (initrd_base + initrd_size));
-    if (ret < 0)
+    if (ret < 0) {
         fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n");
-
+    }
     ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs",
                                   kernel_cmdline);
-    if (ret < 0)
+    if (ret < 0) {
         fprintf(stderr, "couldn't set /chosen/bootargs\n");
+    }
 
-    /* Copy data from the host device tree into the guest. Since the guest can
+    /*
+     * Copy data from the host device tree into the guest. Since the guest can
      * directly access the timebase without host involvement, we must expose
-     * the correct frequencies. */
+     * the correct frequencies.
+     */
     if (kvm_enabled()) {
         tb_freq = kvmppc_get_tbfreq();
         clock_freq = kvmppc_get_clockfreq();
@@ -246,8 +249,10 @@ static void bamboo_init(MachineState *machine)
     if (pcibus) {
         /* Register network interfaces. */
         for (i = 0; i < nb_nics; i++) {
-            /* There are no PCI NICs on the Bamboo board, but there are
-             * PCI slots, so we can pick whatever default model we want. */
+            /*
+             * There are no PCI NICs on the Bamboo board, but there are
+             * PCI slots, so we can pick whatever default model we want.
+             */
             pci_nic_init_nofail(&nd_table[i], pcibus, "e1000", NULL);
         }
     }
diff --git a/hw/ppc/ppc440_uc.c b/hw/ppc/ppc440_uc.c
index 11fdb88c22..53e981ddf4 100644
--- a/hw/ppc/ppc440_uc.c
+++ b/hw/ppc/ppc440_uc.c
@@ -1028,7 +1028,8 @@ void ppc4xx_dma_init(CPUPPCState *env, int dcr_base)
 
 /*****************************************************************************/
 /* PCI Express controller */
-/* FIXME: This is not complete and does not work, only implemented partially
+/*
+ * FIXME: This is not complete and does not work, only implemented partially
  * to allow firmware and guests to find an empty bus. Cards should use PCI.
  */
 #include "hw/pci/pcie_host.h"
diff --git a/hw/ppc/ppc4xx_devs.c b/hw/ppc/ppc4xx_devs.c
index 27ebbb2ffc..ce38ae65e6 100644
--- a/hw/ppc/ppc4xx_devs.c
+++ b/hw/ppc/ppc4xx_devs.c
@@ -65,12 +65,12 @@ enum {
     SDRAM0_CFGDATA = 0x011,
 };
 
-/* XXX: TOFIX: some patches have made this code become inconsistent:
+/*
+ * XXX: TOFIX: some patches have made this code become inconsistent:
  *      there are type inconsistencies, mixing hwaddr, target_ulong
  *      and uint32_t
  */
-static uint32_t sdram_bcr (hwaddr ram_base,
-                           hwaddr ram_size)
+static uint32_t sdram_bcr(hwaddr ram_base, hwaddr ram_size)
 {
     uint32_t bcr;
 
@@ -113,16 +113,17 @@ static inline hwaddr sdram_base(uint32_t bcr)
     return bcr & 0xFF800000;
 }
 
-static target_ulong sdram_size (uint32_t bcr)
+static target_ulong sdram_size(uint32_t bcr)
 {
     target_ulong size;
     int sh;
 
     sh = (bcr >> 17) & 0x7;
-    if (sh == 7)
+    if (sh == 7) {
         size = -1;
-    else
+    } else {
         size = (4 * MiB) << sh;
+    }
 
     return size;
 }
@@ -153,7 +154,7 @@ static void sdram_set_bcr(ppc4xx_sdram_t *sdram, int i,
     }
 }
 
-static void sdram_map_bcr (ppc4xx_sdram_t *sdram)
+static void sdram_map_bcr(ppc4xx_sdram_t *sdram)
 {
     int i;
 
@@ -167,7 +168,7 @@ static void sdram_map_bcr (ppc4xx_sdram_t *sdram)
     }
 }
 
-static void sdram_unmap_bcr (ppc4xx_sdram_t *sdram)
+static void sdram_unmap_bcr(ppc4xx_sdram_t *sdram)
 {
     int i;
 
@@ -179,7 +180,7 @@ static void sdram_unmap_bcr (ppc4xx_sdram_t *sdram)
     }
 }
 
-static uint32_t dcr_read_sdram (void *opaque, int dcrn)
+static uint32_t dcr_read_sdram(void *opaque, int dcrn)
 {
     ppc4xx_sdram_t *sdram;
     uint32_t ret;
@@ -247,7 +248,7 @@ static uint32_t dcr_read_sdram (void *opaque, int dcrn)
     return ret;
 }
 
-static void dcr_write_sdram (void *opaque, int dcrn, uint32_t val)
+static void dcr_write_sdram(void *opaque, int dcrn, uint32_t val)
 {
     ppc4xx_sdram_t *sdram;
 
@@ -280,10 +281,11 @@ static void dcr_write_sdram (void *opaque, int dcrn, uint32_t val)
                 sdram_unmap_bcr(sdram);
                 sdram->status |= 0x80000000;
             }
-            if (!(sdram->cfg & 0x40000000) && (val & 0x40000000))
+            if (!(sdram->cfg & 0x40000000) && (val & 0x40000000)) {
                 sdram->status |= 0x40000000;
-            else if ((sdram->cfg & 0x40000000) && !(val & 0x40000000))
+            } else if ((sdram->cfg & 0x40000000) && !(val & 0x40000000)) {
                 sdram->status &= ~0x40000000;
+            }
             sdram->cfg = val;
             break;
         case 0x24: /* SDRAM_STATUS */
@@ -315,10 +317,11 @@ static void dcr_write_sdram (void *opaque, int dcrn, uint32_t val)
             break;
         case 0x98: /* SDRAM_ECCESR */
             val &= 0xFFF0F000;
-            if (sdram->eccesr == 0 && val != 0)
+            if (sdram->eccesr == 0 && val != 0) {
                 qemu_irq_raise(sdram->irq);
-            else if (sdram->eccesr != 0 && val == 0)
+            } else if (sdram->eccesr != 0 && val == 0) {
                 qemu_irq_lower(sdram->irq);
+            }
             sdram->eccesr = val;
             break;
         default: /* Error */
@@ -328,7 +331,7 @@ static void dcr_write_sdram (void *opaque, int dcrn, uint32_t val)
     }
 }
 
-static void sdram_reset (void *opaque)
+static void sdram_reset(void *opaque)
 {
     ppc4xx_sdram_t *sdram;
 
@@ -348,11 +351,11 @@ static void sdram_reset (void *opaque)
     sdram->cfg = 0x00800000;
 }
 
-void ppc4xx_sdram_init (CPUPPCState *env, qemu_irq irq, int nbanks,
-                        MemoryRegion *ram_memories,
-                        hwaddr *ram_bases,
-                        hwaddr *ram_sizes,
-                        int do_init)
+void ppc4xx_sdram_init(CPUPPCState *env, qemu_irq irq, int nbanks,
+                       MemoryRegion *ram_memories,
+                       hwaddr *ram_bases,
+                       hwaddr *ram_sizes,
+                       int do_init)
 {
     ppc4xx_sdram_t *sdram;
 
@@ -371,8 +374,9 @@ void ppc4xx_sdram_init (CPUPPCState *env, qemu_irq irq, int nbanks,
                      sdram, &dcr_read_sdram, &dcr_write_sdram);
     ppc_dcr_register(env, SDRAM0_CFGDATA,
                      sdram, &dcr_read_sdram, &dcr_write_sdram);
-    if (do_init)
+    if (do_init) {
         sdram_map_bcr(sdram);
+    }
 }
 
 /*
@@ -429,7 +433,7 @@ void ppc4xx_sdram_banks(MemoryRegion *ram, int nr_banks,
         }
         error_report("at most %d bank%s of %s MiB each supported",
                      nr_banks, nr_banks == 1 ? "" : "s", s->str);
-        error_printf("Possible valid RAM size: %" PRIi64 " MiB \n",
+        error_printf("Possible valid RAM size: %" PRIi64 " MiB\n",
             used_size ? used_size / MiB : sdram_bank_sizes[i - 1] / MiB);
 
         g_string_free(s, true);
diff --git a/hw/ppc/ppc4xx_pci.c b/hw/ppc/ppc4xx_pci.c
index 5df97e6d15..8642b96455 100644
--- a/hw/ppc/ppc4xx_pci.c
+++ b/hw/ppc/ppc4xx_pci.c
@@ -16,8 +16,10 @@
  * Authors: Hollis Blanchard <hollisb@us.ibm.com>
  */
 
-/* This file implements emulation of the 32-bit PCI controller found in some
- * 4xx SoCs, such as the 440EP. */
+/*
+ * This file implements emulation of the 32-bit PCI controller found in some
+ * 4xx SoCs, such as the 440EP.
+ */
 
 #include "qemu/osdep.h"
 #include "qemu/log.h"
@@ -65,8 +67,10 @@ struct PPC4xxPCIState {
 #define PCIC0_CFGADDR       0x0
 #define PCIC0_CFGDATA       0x4
 
-/* PLB Memory Map (PMM) registers specify which PLB addresses are translated to
- * PCI accesses. */
+/*
+ * PLB Memory Map (PMM) registers specify which PLB addresses are translated to
+ * PCI accesses.
+ */
 #define PCIL0_PMM0LA        0x0
 #define PCIL0_PMM0MA        0x4
 #define PCIL0_PMM0PCILA     0x8
@@ -80,8 +84,10 @@ struct PPC4xxPCIState {
 #define PCIL0_PMM2PCILA     0x28
 #define PCIL0_PMM2PCIHA     0x2c
 
-/* PCI Target Map (PTM) registers specify which PCI addresses are translated to
- * PLB accesses. */
+/*
+ * PCI Target Map (PTM) registers specify which PCI addresses are translated to
+ * PLB accesses.
+ */
 #define PCIL0_PTM1MS        0x30
 #define PCIL0_PTM1LA        0x34
 #define PCIL0_PTM2MS        0x38
@@ -96,9 +102,10 @@ static void ppc4xx_pci_reg_write4(void *opaque, hwaddr offset,
 {
     struct PPC4xxPCIState *pci = opaque;
 
-    /* We ignore all target attempts at PCI configuration, effectively
-     * assuming a bidirectional 1:1 mapping of PLB and PCI space. */
-
+    /*
+     * We ignore all target attempts at PCI configuration, effectively
+     * assuming a bidirectional 1:1 mapping of PLB and PCI space.
+     */
     switch (offset) {
     case PCIL0_PMM0LA:
         pci->pmm[0].la = value;
@@ -243,8 +250,10 @@ static void ppc4xx_pci_reset(void *opaque)
     memset(pci->ptm, 0, sizeof(pci->ptm));
 }
 
-/* On Bamboo, all pins from each slot are tied to a single board IRQ. This
- * may need further refactoring for other boards. */
+/*
+ * On Bamboo, all pins from each slot are tied to a single board IRQ.
+ * This may need further refactoring for other boards.
+ */
 static int ppc4xx_pci_map_irq(PCIDevice *pci_dev, int irq_num)
 {
     int slot = PCI_SLOT(pci_dev->devfn);
-- 
2.37.2



  parent reply	other threads:[~2022-08-31 20:00 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-31 18:49 [PULL 00/60] ppc queue Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 01/60] pseries: Update SLOF firmware image Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 02/60] target/ppc: Fix host PVR matching for KVM Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 03/60] ppc/pnv: Add initial P9/10 SBE model Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 04/60] fpu: Add rebias bool, value and operation Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 05/60] target/ppc: Bugfix FP when OE/UE are set Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 06/60] ppc/pnv: add PHB3 bus init helper Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 07/60] ppc/pnv: add PnvPHB base/proxy device Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 08/60] ppc/pnv: turn PnvPHB3 into a PnvPHB backend Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 09/60] ppc/pnv: add PHB4 bus init helper Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 10/60] ppc/pnv: turn PnvPHB4 into a PnvPHB backend Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 11/60] ppc/pnv: add pnv-phb-root-port device Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 12/60] ppc/pnv: remove pnv-phb3-root-port Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 13/60] ppc/pnv: remove pnv-phb4-root-port Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 14/60] ppc/pnv: remove root port name from pnv_phb_attach_root_port() Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 15/60] ppc/pnv: remove pecc->rp_model Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 16/60] ppc/pnv: remove PnvPHB4.version Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 17/60] ppc/pnv: move attach_root_port helper to pnv-phb.c Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 18/60] ppc/pnv: add phb-id/chip-id PnvPHB3RootBus properties Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 19/60] ppc/pnv: add phb-id/chip-id PnvPHB4RootBus properties Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 20/60] ppc/pnv: set root port chassis and slot using Bus properties Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 21/60] ppc/pnv: add helpers for pnv-phb user devices Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 22/60] ppc/pnv: turn chip8->phbs[] into a PnvPHB* array Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 23/60] ppc/pnv: enable user created pnv-phb for powernv8 Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 24/60] ppc/pnv: add PHB4 helpers for user created pnv-phb Daniel Henrique Barboza
2022-08-31 18:49 ` [PULL 25/60] ppc/pnv: enable user created pnv-phb for powernv9 Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 26/60] ppc/pnv: change pnv_phb4_get_pec() to also retrieve chip10->pecs Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 27/60] ppc/pnv: user creatable pnv-phb for powernv10 Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 28/60] ppc/pnv: consolidate pnv_parent_*_fixup() helpers Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 29/60] ppc/pnv: fix QOM parenting of user creatable root ports Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 30/60] ppc/ppc405: Remove taihu machine Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 31/60] ppc/ppc405: Introduce a PPC405 generic machine Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 32/60] ppc/ppc405: Move devices under the ref405ep machine Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 33/60] ppc/ppc405: Move SRAM " Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 34/60] ppc/ppc405: Introduce a PPC405 SoC Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 35/60] ppc/ppc405: Start QOMification of the SoC Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 36/60] ppc/ppc405: QOM'ify CPU Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 37/60] ppc/ppc4xx: Introduce a DCR device model Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 38/60] ppc/ppc405: QOM'ify CPC Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 39/60] ppc/ppc405: QOM'ify GPT Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 40/60] ppc/ppc405: QOM'ify OCM Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 41/60] ppc/ppc405: QOM'ify GPIO Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 42/60] ppc/ppc405: QOM'ify DMA Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 43/60] ppc/ppc405: QOM'ify EBC Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 44/60] ppc/ppc405: QOM'ify OPBA Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 45/60] ppc/ppc405: QOM'ify POB Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 46/60] ppc/ppc405: QOM'ify PLB Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 47/60] ppc/ppc405: QOM'ify MAL Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 48/60] ppc4xx: Move PLB model to ppc4xx_devs.c Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 49/60] ppc4xx: Rename ppc405-plb to ppc4xx-plb Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 50/60] ppc4xx: Move EBC model to ppc4xx_devs.c Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 51/60] ppc4xx: Rename ppc405-ebc to ppc4xx-ebc Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 52/60] ppc/ppc405: Use an embedded PPCUIC model in SoC state Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 53/60] hw/intc/ppc-uic: Convert ppc-uic to a PPC4xx DCR device Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 54/60] ppc/ppc405: Use an explicit I2C object Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 55/60] ppc/ppc405: QOM'ify FPGA Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 56/60] ppc405: Move machine specific code to ppc405_boards.c Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 57/60] hw/ppc/sam3460ex: Remove PPC405 dependency from sam460ex Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 58/60] hw/ppc/Kconfig: Move imply before select Daniel Henrique Barboza
2022-08-31 18:50 ` [PULL 59/60] ppc/ppc4xx: Fix sdram trace events Daniel Henrique Barboza
2022-08-31 18:50 ` Daniel Henrique Barboza [this message]
2022-08-31 19:37 ` [PULL 00/60] ppc queue BALATON Zoltan
2022-08-31 20:27   ` Daniel Henrique Barboza

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220831185034.23240-61-danielhb413@gmail.com \
    --to=danielhb413@gmail.com \
    --cc=balaton@eik.bme.hu \
    --cc=clg@kaod.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.