Re: [PATCH v2 1/3] dt-bindings: reset: syscon-reboot: Add priority property

[Rob Herring <robh@kernel.org>]

On Wed, Aug 31, 2022 at 09:26:17AM +0200, Arnd Bergmann wrote:
> On Wed, Aug 31, 2022, at 1:00 AM, Pali Rohár wrote:
> > a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml 
> > b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> > index da2509724812..4c8b0d0a0111 100644
> > --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> > +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> > @@ -42,6 +42,11 @@ properties:
> >      $ref: /schemas/types.yaml#/definitions/uint32
> >      description: The reset value written to the reboot register (32 
> > bit access).
> > 
> > +  priority:
> > +    $ref: /schemas/types.yaml#/definitions/int32
> > +    description: Priority level of this syscon reset device.
> > +    default: 192
> > +
> 
> My first thought was that this is looks very Linux specific and
> probably should be documented as such. However I see there is
> already precedent in
> Documentation/devicetree/bindings/power/reset/gpio-restart.yaml,
> which defines the same thing with a more detailed description.
> 
> Since this is an optional property for both, and it has the
> same meaning here, is it possible to move the description
> to a common place where it either gets included from both,
> or from all reboot bindings?

Yes, that is what I said in my other replies.

Rob