From: Bjorn Helgaas <helgaas@kernel.org>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>,
Rajvi Jingar <rajvi.jingar@linux.intel.com>,
"Rafael J . Wysocki" <rafael@kernel.org>
Cc: Koba Ko <koba.ko@canonical.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
"David E . Box" <david.e.box@linux.intel.com>,
Sathyanarayanan Kuppuswamy
<sathyanarayanan.kuppuswamy@linux.intel.com>,
linux-pci@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>
Subject: [PATCH v3 04/10] PCI/PTM: Separate configuration and enable
Date: Tue, 6 Sep 2022 17:23:45 -0500 [thread overview]
Message-ID: <20220906222351.64760-5-helgaas@kernel.org> (raw)
In-Reply-To: <20220906222351.64760-1-helgaas@kernel.org>
From: Bjorn Helgaas <bhelgaas@google.com>
PTM configuration and enabling were previously mixed together:
pci_ptm_init() collected granularity info and enabled PTM for Root Ports
and Switch Upstream Ports; pci_enable_ptm() did the same for Endpoints.
Move everything related to the PTM Capability register to pci_ptm_init()
for all devices, and everything related to the PTM Control register to
pci_enable_ptm().
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/pcie/ptm.c | 81 ++++++++++++++----------------------------
1 file changed, 27 insertions(+), 54 deletions(-)
diff --git a/drivers/pci/pcie/ptm.c b/drivers/pci/pcie/ptm.c
index 8729c3e452ee..ac51cd84793f 100644
--- a/drivers/pci/pcie/ptm.c
+++ b/drivers/pci/pcie/ptm.c
@@ -102,22 +102,12 @@ static struct pci_dev *pci_upstream_ptm(struct pci_dev *dev)
void pci_ptm_init(struct pci_dev *dev)
{
int ptm;
- u32 cap, ctrl;
- u8 local_clock;
+ u32 cap;
struct pci_dev *ups;
if (!pci_is_pcie(dev))
return;
- /*
- * Enable PTM only on interior devices (root ports, switch ports,
- * etc.) on the assumption that it causes no link traffic until an
- * endpoint enables it.
- */
- if ((pci_pcie_type(dev) == PCI_EXP_TYPE_ENDPOINT ||
- pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END))
- return;
-
ptm = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM);
if (!ptm)
return;
@@ -126,76 +116,59 @@ void pci_ptm_init(struct pci_dev *dev)
pci_add_ext_cap_save_buffer(dev, PCI_EXT_CAP_ID_PTM, sizeof(u16));
pci_read_config_dword(dev, ptm + PCI_PTM_CAP, &cap);
- local_clock = (cap & PCI_PTM_GRANULARITY_MASK) >> 8;
+ dev->ptm_granularity = (cap & PCI_PTM_GRANULARITY_MASK) >> 8;
/*
- * There's no point in enabling PTM unless it's enabled in the
- * upstream device or this device can be a PTM Root itself. Per
- * the spec recommendation (PCIe r3.1, sec 7.32.3), select the
+ * Per the spec recommendation (PCIe r6.0, sec 7.9.15.3), select the
* furthest upstream Time Source as the PTM Root.
*/
ups = pci_upstream_ptm(dev);
- if (ups && ups->ptm_enabled) {
- ctrl = PCI_PTM_CTRL_ENABLE;
+ if (ups) {
if (ups->ptm_granularity == 0)
dev->ptm_granularity = 0;
- else if (ups->ptm_granularity > local_clock)
+ else if (ups->ptm_granularity > dev->ptm_granularity)
dev->ptm_granularity = ups->ptm_granularity;
- } else {
- if (cap & PCI_PTM_CAP_ROOT) {
- ctrl = PCI_PTM_CTRL_ENABLE | PCI_PTM_CTRL_ROOT;
- dev->ptm_root = 1;
- dev->ptm_granularity = local_clock;
- } else
- return;
+ } else if (cap & PCI_PTM_CAP_ROOT) {
+ dev->ptm_root = 1;
+ } else if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
+
+ /*
+ * Per sec 7.9.15.3, this should be the Local Clock
+ * Granularity of the associated Time Source. But it
+ * doesn't say how to find that Time Source.
+ */
+ dev->ptm_granularity = 0;
}
- ctrl |= dev->ptm_granularity << 8;
- pci_write_config_dword(dev, ptm + PCI_PTM_CTRL, ctrl);
- dev->ptm_enabled = 1;
-
- pci_ptm_info(dev);
+ if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
+ pci_pcie_type(dev) == PCI_EXP_TYPE_UPSTREAM)
+ pci_enable_ptm(dev, NULL);
}
int pci_enable_ptm(struct pci_dev *dev, u8 *granularity)
{
- int ptm;
- u32 cap, ctrl;
+ int ptm = dev->ptm_cap;
struct pci_dev *ups;
+ u32 ctrl;
- if (!pci_is_pcie(dev))
- return -EINVAL;
-
- ptm = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM);
if (!ptm)
return -EINVAL;
- dev->ptm_cap = ptm;
- pci_read_config_dword(dev, ptm + PCI_PTM_CAP, &cap);
- if (!(cap & PCI_PTM_CAP_REQ))
- return -EINVAL;
-
/*
- * For a PCIe Endpoint, PTM is only useful if the endpoint can
- * issue PTM requests to upstream devices that have PTM enabled.
- *
- * For Root Complex Integrated Endpoints, there is no upstream
- * device, so there must be some implementation-specific way to
- * associate the endpoint with a time source.
+ * If this device is not a PTM Root, the upstream link partner must
+ * have PTM enabled before we can enable PTM.
*/
- if (pci_pcie_type(dev) == PCI_EXP_TYPE_ENDPOINT) {
+ if (!dev->ptm_root) {
ups = pci_upstream_ptm(dev);
if (!ups || !ups->ptm_enabled)
return -EINVAL;
-
- dev->ptm_granularity = ups->ptm_granularity;
- } else if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
- dev->ptm_granularity = 0;
- } else
- return -EINVAL;
+ }
ctrl = PCI_PTM_CTRL_ENABLE;
ctrl |= dev->ptm_granularity << 8;
+ if (dev->ptm_root)
+ ctrl |= PCI_PTM_CTRL_ROOT;
+
pci_write_config_dword(dev, ptm + PCI_PTM_CTRL, ctrl);
dev->ptm_enabled = 1;
--
2.25.1
next prev parent reply other threads:[~2022-09-06 22:24 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-06 22:23 [PATCH v3 00/10] PCI/PM: Always disable PTM for all devices during suspend Bjorn Helgaas
2022-09-06 22:23 ` [PATCH v3 01/10] PCI/PTM: Preserve PTM Root Select Bjorn Helgaas
2022-09-06 22:23 ` [PATCH v3 02/10] PCI/PTM: Cache PTM Capability offset Bjorn Helgaas
2022-09-06 23:18 ` Sathyanarayanan Kuppuswamy
2022-09-07 15:49 ` Bjorn Helgaas
2022-09-06 22:23 ` [PATCH v3 03/10] PCI/PTM: Add pci_upstream_ptm() helper Bjorn Helgaas
2022-09-06 22:23 ` Bjorn Helgaas [this message]
2022-09-07 5:25 ` [PATCH v3 04/10] PCI/PTM: Separate configuration and enable Mika Westerberg
2022-09-06 22:23 ` [PATCH v3 05/10] PCI/PTM: Add pci_disable_ptm() wrapper Bjorn Helgaas
2022-09-07 5:28 ` Mika Westerberg
2022-09-07 21:12 ` Bjorn Helgaas
2022-09-06 22:23 ` [PATCH v3 06/10] PCI/PTM: Add pci_enable_ptm() wrapper Bjorn Helgaas
2022-09-07 5:29 ` Mika Westerberg
2022-09-08 20:18 ` Sathyanarayanan Kuppuswamy
2022-09-06 22:23 ` [PATCH v3 07/10] PCI/PTM: Add suspend/resume Bjorn Helgaas
2022-09-07 5:30 ` Mika Westerberg
2022-09-07 16:44 ` Bjorn Helgaas
2022-09-06 22:23 ` [PATCH v3 08/10] PCI/PTM: Move pci_ptm_info() body into its only caller Bjorn Helgaas
2022-09-06 22:23 ` [PATCH v3 09/10] PCI/PTM: Reorder functions in logical order Bjorn Helgaas
2022-09-08 20:15 ` Sathyanarayanan Kuppuswamy
2022-09-08 20:58 ` Bjorn Helgaas
2022-09-06 22:23 ` [PATCH v3 10/10] PCI/PM: Always disable PTM for all devices during suspend Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220906222351.64760-5-helgaas@kernel.org \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=david.e.box@linux.intel.com \
--cc=kai.heng.feng@canonical.com \
--cc=koba.ko@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=rafael@kernel.org \
--cc=rajvi.jingar@linux.intel.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.