From: Oder Chiou <oder_chiou@realtek.com>
To: <broonie@kernel.org>, <lgirdwood@gmail.com>
Cc: Oder Chiou <oder_chiou@realtek.com>,
jack.yu@realtek.com, alsa-devel@alsa-project.org,
jacal_tseng@realtek.com, Sameer Pujar <spujar@nvidia.com>,
albertchen@realtek.com, derek.fang@realtek.com,
shumingf@realtek.com, flove@realtek.com
Subject: [PATCH] ASoC: rt5640: Fix the issue of the abnormal JD2 status
Date: Mon, 12 Sep 2022 15:29:31 +0800 [thread overview]
Message-ID: <20220912072931.1856-1-oder_chiou@realtek.com> (raw)
The patch fixes the issue of the abnormal JD2 status.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Sameer Pujar <spujar@nvidia.com>
---
sound/soc/codecs/rt5640.c | 64 +++++++++++++++++++++++++++------------
sound/soc/codecs/rt5640.h | 14 +++++++++
2 files changed, 59 insertions(+), 19 deletions(-)
diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c
index 5a844329800..0f8e6dd214b 100644
--- a/sound/soc/codecs/rt5640.c
+++ b/sound/soc/codecs/rt5640.c
@@ -2494,7 +2494,7 @@ static void rt5640_enable_jack_detect(struct snd_soc_component *component,
/* Select JD-source */
snd_soc_component_update_bits(component, RT5640_JD_CTRL,
- RT5640_JD_MASK, rt5640->jd_src);
+ RT5640_JD_MASK, rt5640->jd_src << RT5640_JD_SFT);
/* Selecting GPIO01 as an interrupt */
snd_soc_component_update_bits(component, RT5640_GPIO_CTRL1,
@@ -2504,12 +2504,8 @@ static void rt5640_enable_jack_detect(struct snd_soc_component *component,
snd_soc_component_update_bits(component, RT5640_GPIO_CTRL3,
RT5640_GP1_PF_MASK, RT5640_GP1_PF_OUT);
- /* Enabling jd2 in general control 1 */
snd_soc_component_write(component, RT5640_DUMMY1, 0x3f41);
- /* Enabling jd2 in general control 2 */
- snd_soc_component_write(component, RT5640_DUMMY2, 0x4001);
-
rt5640_set_ovcd_params(component);
/*
@@ -2518,12 +2514,25 @@ static void rt5640_enable_jack_detect(struct snd_soc_component *component,
* pin 0/1 instead of it being stuck to 1. So we invert the JD polarity
* on systems where the hardware does not already do this.
*/
- if (rt5640->jd_inverted)
- snd_soc_component_write(component, RT5640_IRQ_CTRL1,
- RT5640_IRQ_JD_NOR);
- else
- snd_soc_component_write(component, RT5640_IRQ_CTRL1,
- RT5640_IRQ_JD_NOR | RT5640_JD_P_INV);
+ if (rt5640->jd_inverted) {
+ if (rt5640->jd_src == RT5640_JD_SRC_JD1_IN4P)
+ snd_soc_component_write(component, RT5640_IRQ_CTRL1,
+ RT5640_IRQ_JD_NOR);
+ else if (rt5640->jd_src == RT5640_JD_SRC_JD2_IN4N)
+ snd_soc_component_update_bits(component, RT5640_DUMMY2,
+ RT5640_IRQ_JD2_MASK | RT5640_JD2_MASK,
+ RT5640_IRQ_JD2_NOR | RT5640_JD2_EN);
+ } else {
+ if (rt5640->jd_src == RT5640_JD_SRC_JD1_IN4P)
+ snd_soc_component_write(component, RT5640_IRQ_CTRL1,
+ RT5640_IRQ_JD_NOR | RT5640_JD_P_INV);
+ else if (rt5640->jd_src == RT5640_JD_SRC_JD2_IN4N)
+ snd_soc_component_update_bits(component, RT5640_DUMMY2,
+ RT5640_IRQ_JD2_MASK | RT5640_JD2_P_MASK |
+ RT5640_JD2_MASK,
+ RT5640_IRQ_JD2_NOR | RT5640_JD2_P_INV |
+ RT5640_JD2_EN);
+ }
rt5640->jack = jack;
if (rt5640->jack->status & SND_JACK_MICROPHONE) {
@@ -2725,10 +2734,8 @@ static int rt5640_probe(struct snd_soc_component *component)
if (device_property_read_u32(component->dev,
"realtek,jack-detect-source", &val) == 0) {
- if (val <= RT5640_JD_SRC_GPIO4)
- rt5640->jd_src = val << RT5640_JD_SFT;
- else if (val == RT5640_JD_SRC_HDA_HEADER)
- rt5640->jd_src = RT5640_JD_SRC_HDA_HEADER;
+ if (val <= RT5640_JD_SRC_HDA_HEADER)
+ rt5640->jd_src = val;
else
dev_warn(component->dev, "Warning: Invalid jack-detect-source value: %d, leaving jack-detect disabled\n",
val);
@@ -2809,12 +2816,31 @@ static int rt5640_resume(struct snd_soc_component *component)
regcache_sync(rt5640->regmap);
if (rt5640->jack) {
- if (rt5640->jd_src == RT5640_JD_SRC_HDA_HEADER)
+ if (rt5640->jd_src == RT5640_JD_SRC_HDA_HEADER) {
snd_soc_component_update_bits(component,
RT5640_DUMMY2, 0x1100, 0x1100);
- else
- snd_soc_component_write(component, RT5640_DUMMY2,
- 0x4001);
+ } else {
+ if (rt5640->jd_inverted) {
+ if (rt5640->jd_src == RT5640_JD_SRC_JD2_IN4N)
+ snd_soc_component_update_bits(
+ component, RT5640_DUMMY2,
+ RT5640_IRQ_JD2_MASK |
+ RT5640_JD2_MASK,
+ RT5640_IRQ_JD2_NOR |
+ RT5640_JD2_EN);
+
+ } else {
+ if (rt5640->jd_src == RT5640_JD_SRC_JD2_IN4N)
+ snd_soc_component_update_bits(
+ component, RT5640_DUMMY2,
+ RT5640_IRQ_JD2_MASK |
+ RT5640_JD2_P_MASK |
+ RT5640_JD2_MASK,
+ RT5640_IRQ_JD2_NOR |
+ RT5640_JD2_P_INV |
+ RT5640_JD2_EN);
+ }
+ }
queue_delayed_work(system_long_wq, &rt5640->jack_work, 0);
}
diff --git a/sound/soc/codecs/rt5640.h b/sound/soc/codecs/rt5640.h
index 505c9351405..f58b88e3325 100644
--- a/sound/soc/codecs/rt5640.h
+++ b/sound/soc/codecs/rt5640.h
@@ -1984,6 +1984,20 @@
#define RT5640_M_MONO_ADC_R_SFT 12
#define RT5640_MCLK_DET (0x1 << 11)
+/* General Control 1 (0xfb) */
+#define RT5640_IRQ_JD2_MASK (0x1 << 12)
+#define RT5640_IRQ_JD2_SFT 12
+#define RT5640_IRQ_JD2_BP (0x0 << 12)
+#define RT5640_IRQ_JD2_NOR (0x1 << 12)
+#define RT5640_JD2_P_MASK (0x1 << 10)
+#define RT5640_JD2_P_SFT 10
+#define RT5640_JD2_P_NOR (0x0 << 10)
+#define RT5640_JD2_P_INV (0x1 << 10)
+#define RT5640_JD2_MASK (0x1 << 8)
+#define RT5640_JD2_SFT 8
+#define RT5640_JD2_DIS (0x0 << 8)
+#define RT5640_JD2_EN (0x1 << 8)
+
/* Codec Private Register definition */
/* MIC Over current threshold scale factor (0x15) */
--
2.34.1
next reply other threads:[~2022-09-12 7:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-12 7:29 Oder Chiou [this message]
2022-09-12 9:37 ` [PATCH] ASoC: rt5640: Fix the issue of the abnormal JD2 status Mark Brown
2022-09-12 11:54 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220912072931.1856-1-oder_chiou@realtek.com \
--to=oder_chiou@realtek.com \
--cc=albertchen@realtek.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=derek.fang@realtek.com \
--cc=flove@realtek.com \
--cc=jacal_tseng@realtek.com \
--cc=jack.yu@realtek.com \
--cc=lgirdwood@gmail.com \
--cc=shumingf@realtek.com \
--cc=spujar@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.