From: Rob Herring <robh@kernel.org>
To: Sean Anderson <sean.anderson@seco.com>
Cc: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
Ioana Ciornei <ioana.ciornei@nxp.com>,
linux-arm-kernel@lists.infradead.org,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Madalin Bucur <madalin.bucur@nxp.com>,
Camelia Alexandra Groza <camelia.groza@nxp.com>,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH v5 1/8] dt-bindings: phy: Add 2500BASE-X and 10GBASE-R
Date: Mon, 12 Sep 2022 14:49:56 -0500 [thread overview]
Message-ID: <20220912194956.GA1718874-robh@kernel.org> (raw)
In-Reply-To: <20220902213721.946138-2-sean.anderson@seco.com>
On Fri, Sep 02, 2022 at 05:37:14PM -0400, Sean Anderson wrote:
> This adds some modes necessary for Lynx 10G support. 2500BASE-X, also
> known as 2.5G SGMII, is 1000BASE-X/SGMII overclocked to 3.125 GHz, with
> autonegotiation disabled. 10GBASE-R, also known as XFI, is the protocol
> spoken between the PMA and PMD ethernet layers for 10GBASE-T and
> 10GBASE-S/L/E. It is typically used to communicate directly with SFP+
> modules, or with 10GBASE-T phys.
>
> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
> ---
>
> (no changes since v4)
>
> Changes in v4:
> - New
>
> include/dt-bindings/phy/phy.h | 2 ++
> 1 file changed, 2 insertions(+)
A corresponding update to the schema for phy-type[1] will be needed. A
GH PR or patch to devicetree-spec@vger.kernel.org is fine.
Acked-by: Rob Herring <robh@kernel.org>
Rob
[1] https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/phy/phy-provider.yaml#L19
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Sean Anderson <sean.anderson@seco.com>
Cc: devicetree@vger.kernel.org, Madalin Bucur <madalin.bucur@nxp.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
Camelia Alexandra Groza <camelia.groza@nxp.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
linux-phy@lists.infradead.org, linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v5 1/8] dt-bindings: phy: Add 2500BASE-X and 10GBASE-R
Date: Mon, 12 Sep 2022 14:49:56 -0500 [thread overview]
Message-ID: <20220912194956.GA1718874-robh@kernel.org> (raw)
In-Reply-To: <20220902213721.946138-2-sean.anderson@seco.com>
On Fri, Sep 02, 2022 at 05:37:14PM -0400, Sean Anderson wrote:
> This adds some modes necessary for Lynx 10G support. 2500BASE-X, also
> known as 2.5G SGMII, is 1000BASE-X/SGMII overclocked to 3.125 GHz, with
> autonegotiation disabled. 10GBASE-R, also known as XFI, is the protocol
> spoken between the PMA and PMD ethernet layers for 10GBASE-T and
> 10GBASE-S/L/E. It is typically used to communicate directly with SFP+
> modules, or with 10GBASE-T phys.
>
> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
> ---
>
> (no changes since v4)
>
> Changes in v4:
> - New
>
> include/dt-bindings/phy/phy.h | 2 ++
> 1 file changed, 2 insertions(+)
A corresponding update to the schema for phy-type[1] will be needed. A
GH PR or patch to devicetree-spec@vger.kernel.org is fine.
Acked-by: Rob Herring <robh@kernel.org>
Rob
[1] https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/phy/phy-provider.yaml#L19
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Sean Anderson <sean.anderson@seco.com>
Cc: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
Ioana Ciornei <ioana.ciornei@nxp.com>,
linux-arm-kernel@lists.infradead.org,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Madalin Bucur <madalin.bucur@nxp.com>,
Camelia Alexandra Groza <camelia.groza@nxp.com>,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH v5 1/8] dt-bindings: phy: Add 2500BASE-X and 10GBASE-R
Date: Mon, 12 Sep 2022 14:49:56 -0500 [thread overview]
Message-ID: <20220912194956.GA1718874-robh@kernel.org> (raw)
In-Reply-To: <20220902213721.946138-2-sean.anderson@seco.com>
On Fri, Sep 02, 2022 at 05:37:14PM -0400, Sean Anderson wrote:
> This adds some modes necessary for Lynx 10G support. 2500BASE-X, also
> known as 2.5G SGMII, is 1000BASE-X/SGMII overclocked to 3.125 GHz, with
> autonegotiation disabled. 10GBASE-R, also known as XFI, is the protocol
> spoken between the PMA and PMD ethernet layers for 10GBASE-T and
> 10GBASE-S/L/E. It is typically used to communicate directly with SFP+
> modules, or with 10GBASE-T phys.
>
> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
> ---
>
> (no changes since v4)
>
> Changes in v4:
> - New
>
> include/dt-bindings/phy/phy.h | 2 ++
> 1 file changed, 2 insertions(+)
A corresponding update to the schema for phy-type[1] will be needed. A
GH PR or patch to devicetree-spec@vger.kernel.org is fine.
Acked-by: Rob Herring <robh@kernel.org>
Rob
[1] https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/phy/phy-provider.yaml#L19
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Sean Anderson <sean.anderson@seco.com>
Cc: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
Ioana Ciornei <ioana.ciornei@nxp.com>,
linux-arm-kernel@lists.infradead.org,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Madalin Bucur <madalin.bucur@nxp.com>,
Camelia Alexandra Groza <camelia.groza@nxp.com>,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH v5 1/8] dt-bindings: phy: Add 2500BASE-X and 10GBASE-R
Date: Mon, 12 Sep 2022 14:49:56 -0500 [thread overview]
Message-ID: <20220912194956.GA1718874-robh@kernel.org> (raw)
In-Reply-To: <20220902213721.946138-2-sean.anderson@seco.com>
On Fri, Sep 02, 2022 at 05:37:14PM -0400, Sean Anderson wrote:
> This adds some modes necessary for Lynx 10G support. 2500BASE-X, also
> known as 2.5G SGMII, is 1000BASE-X/SGMII overclocked to 3.125 GHz, with
> autonegotiation disabled. 10GBASE-R, also known as XFI, is the protocol
> spoken between the PMA and PMD ethernet layers for 10GBASE-T and
> 10GBASE-S/L/E. It is typically used to communicate directly with SFP+
> modules, or with 10GBASE-T phys.
>
> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
> ---
>
> (no changes since v4)
>
> Changes in v4:
> - New
>
> include/dt-bindings/phy/phy.h | 2 ++
> 1 file changed, 2 insertions(+)
A corresponding update to the schema for phy-type[1] will be needed. A
GH PR or patch to devicetree-spec@vger.kernel.org is fine.
Acked-by: Rob Herring <robh@kernel.org>
Rob
[1] https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/phy/phy-provider.yaml#L19
next prev parent reply other threads:[~2022-09-12 19:50 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-02 21:37 [PATCH v5 0/8] phy: Add support for Lynx 10G SerDes Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` [PATCH v5 1/8] dt-bindings: phy: Add 2500BASE-X and 10GBASE-R Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-12 19:49 ` Rob Herring [this message]
2022-09-12 19:49 ` Rob Herring
2022-09-12 19:49 ` Rob Herring
2022-09-12 19:49 ` Rob Herring
2022-09-02 21:37 ` [PATCH v5 2/8] dt-bindings: phy: Add Lynx 10G phy binding Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-12 19:46 ` Rob Herring
2022-09-12 19:46 ` Rob Herring
2022-09-12 19:46 ` Rob Herring
2022-09-12 19:46 ` Rob Herring
2022-09-02 21:37 ` [PATCH v5 3/8] dt-bindings: clock: Add ids for Lynx 10g PLLs Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-12 19:50 ` Rob Herring
2022-09-12 19:50 ` Rob Herring
2022-09-12 19:50 ` Rob Herring
2022-09-12 19:50 ` Rob Herring
2022-09-02 21:37 ` [PATCH v5 4/8] phy: fsl: Add Lynx 10G SerDes driver Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-03 15:23 ` kernel test robot
2022-09-03 15:23 ` kernel test robot
2022-09-03 15:23 ` kernel test robot
2022-09-03 15:23 ` kernel test robot
2022-09-06 16:33 ` Sean Anderson
2022-09-06 16:33 ` Sean Anderson
2022-09-06 16:33 ` Sean Anderson
2022-09-06 16:33 ` Sean Anderson
2022-09-06 16:33 ` Sean Anderson
2022-09-02 21:37 ` [PATCH v5 5/8] arm64: dts: ls1046a: Add serdes bindings Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` [PATCH v5 6/8] arm64: dts: ls1088a: " Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` [PATCH v5 7/8] arm64: dts: ls1046ardb: " Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` [PATCH v5 8/8] [WIP] arm64: dts: ls1088ardb: " Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-02 21:37 ` Sean Anderson
2022-09-09 15:05 ` [PATCH v5 0/8] phy: Add support for Lynx 10G SerDes Sean Anderson
2022-09-09 15:05 ` Sean Anderson
2022-09-09 15:05 ` Sean Anderson
2022-09-09 15:05 ` Sean Anderson
2022-09-13 17:44 ` Vinod Koul
2022-09-13 17:44 ` Vinod Koul
2022-09-13 17:44 ` Vinod Koul
2022-09-13 17:44 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220912194956.GA1718874-robh@kernel.org \
--to=robh@kernel.org \
--cc=camelia.groza@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=ioana.ciornei@nxp.com \
--cc=kishon@ti.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-phy@lists.infradead.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=madalin.bucur@nxp.com \
--cc=sean.anderson@seco.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.