All of lore.kernel.org
 help / color / mirror / Atom feed
From: SeongJae Park <sj@kernel.org>
To: SeongJae Park <sj@kernel.org>, Andrew Morton <akpm@linux-foundation.org>
Cc: damon@lists.linux.dev, linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: [PATCH 14/22] mm/damon/reclaim: use watermarks parameters generator macro
Date: Tue, 13 Sep 2022 17:44:41 +0000	[thread overview]
Message-ID: <20220913174449.50645-15-sj@kernel.org> (raw)
In-Reply-To: <20220913174449.50645-1-sj@kernel.org>

This commit makes DAMON_RECLAIM to generate the module parameters for
DAMOS watermarks using the generator macro to simplify the code and
reduce duplicates.

Signed-off-by: SeongJae Park <sj@kernel.org>
---
 mm/damon/reclaim.c | 56 ++++++++--------------------------------------
 1 file changed, 9 insertions(+), 47 deletions(-)

diff --git a/mm/damon/reclaim.c b/mm/damon/reclaim.c
index 48326bef20f5..7f845f617dc5 100644
--- a/mm/damon/reclaim.c
+++ b/mm/damon/reclaim.c
@@ -91,45 +91,14 @@ module_param(quota_sz, ulong, 0600);
 static unsigned long quota_reset_interval_ms __read_mostly = 1000;
 module_param(quota_reset_interval_ms, ulong, 0600);
 
-/*
- * The watermarks check time interval in microseconds.
- *
- * Minimal time to wait before checking the watermarks, when DAMON_RECLAIM is
- * enabled but inactive due to its watermarks rule.  5 seconds by default.
- */
-static unsigned long wmarks_interval __read_mostly = 5000000;
-module_param(wmarks_interval, ulong, 0600);
-
-/*
- * Free memory rate (per thousand) for the high watermark.
- *
- * If free memory of the system in bytes per thousand bytes is higher than
- * this, DAMON_RECLAIM becomes inactive, so it does nothing but periodically
- * checks the watermarks.  500 (50%) by default.
- */
-static unsigned long wmarks_high __read_mostly = 500;
-module_param(wmarks_high, ulong, 0600);
-
-/*
- * Free memory rate (per thousand) for the middle watermark.
- *
- * If free memory of the system in bytes per thousand bytes is between this and
- * the low watermark, DAMON_RECLAIM becomes active, so starts the monitoring
- * and the reclaiming.  400 (40%) by default.
- */
-static unsigned long wmarks_mid __read_mostly = 400;
-module_param(wmarks_mid, ulong, 0600);
-
-/*
- * Free memory rate (per thousand) for the low watermark.
- *
- * If free memory of the system in bytes per thousand bytes is lower than this,
- * DAMON_RECLAIM becomes inactive, so it does nothing but periodically checks
- * the watermarks.  In the case, the system falls back to the LRU-based page
- * granularity reclamation logic.  200 (20%) by default.
- */
-static unsigned long wmarks_low __read_mostly = 200;
-module_param(wmarks_low, ulong, 0600);
+struct damos_watermarks damon_reclaim_wmarks = {
+	.metric = DAMOS_WMARK_FREE_MEM_RATE,
+	.interval = 5000000,	/* 5 seconds */
+	.high = 500,		/* 50 percent */
+	.mid = 400,		/* 40 percent */
+	.low = 200,		/* 20 percent */
+};
+DEFINE_DAMON_MODULES_WMARKS_PARAMS(damon_reclaim_wmarks);
 
 static struct damon_attrs damon_reclaim_mon_attrs = {
 	.sample_interval = 5000,	/* 5 ms */
@@ -214,13 +183,6 @@ static struct damos *damon_reclaim_new_scheme(void)
 			damon_reclaim_mon_attrs.aggr_interval,
 		.max_age_region = UINT_MAX,
 	};
-	struct damos_watermarks wmarks = {
-		.metric = DAMOS_WMARK_FREE_MEM_RATE,
-		.interval = wmarks_interval,
-		.high = wmarks_high,
-		.mid = wmarks_mid,
-		.low = wmarks_low,
-	};
 	struct damos_quota quota = {
 		/*
 		 * Do not try reclamation for more than quota_ms milliseconds
@@ -242,7 +204,7 @@ static struct damos *damon_reclaim_new_scheme(void)
 			/* under the quota. */
 			&quota,
 			/* (De)activate this according to the watermarks. */
-			&wmarks);
+			&damon_reclaim_wmarks);
 }
 
 static int damon_reclaim_apply_parameters(void)
-- 
2.25.1


  parent reply	other threads:[~2022-09-13 17:45 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-13 17:44 [PATCH 00/22] mm/damon: cleanup code SeongJae Park
2022-09-13 17:44 ` [PATCH 01/22] mm/damon/paddr: make supported DAMOS actions of paddr clear SeongJae Park
2022-09-13 17:44 ` [PATCH 02/22] mm/damon/paddr: deduplicate damon_pa_{mark_accessed,deactivate_pages}() SeongJae Park
2022-09-13 17:44 ` [PATCH 03/22] mm/damon/core: copy struct-to-struct instead of field-to-field in damon_new_scheme() SeongJae Park
2022-09-13 17:44 ` [PATCH 04/22] mm/damon/core: factor out 'damos_quota' private fileds initialization SeongJae Park
2022-09-13 17:44 ` [PATCH 05/22] mm/damon/core: use a dedicated struct for monitoring attributes SeongJae Park
2022-09-13 17:44 ` [PATCH 06/22] mm/damon/core: reduce parameters for damon_set_attrs() SeongJae Park
2022-09-13 17:44 ` [PATCH 07/22] mm/damon/reclaim: use 'struct damon_attrs' for storing parameters for it SeongJae Park
2022-09-13 17:44 ` [PATCH 08/22] mm/damon/lru_sort: " SeongJae Park
2022-09-13 17:44 ` [PATCH 09/22] mm/damon: implement a monitoring attributes module parameters generator macro SeongJae Park
2022-09-13 17:44 ` [PATCH 10/22] mm/damon/lru_sort: use monitoring attributes parameters generaotr macro SeongJae Park
2022-09-13 17:44 ` [PATCH 11/22] mm/damon/reclaim: use monitoring attributes parameters generator macro SeongJae Park
2022-09-13 17:44 ` [PATCH 12/22] mm/damon/modules-common: implement a watermarks module " SeongJae Park
2022-09-13 17:44 ` [PATCH 13/22] mm/damon/lru_sort: use watermarks " SeongJae Park
2022-09-13 17:44 ` SeongJae Park [this message]
2022-09-13 17:44 ` [PATCH 15/22] mm/damon/modules-common: implement a stats " SeongJae Park
2022-09-13 17:44 ` [PATCH 16/22] mm/damon/reclaim: use stat parameters generator SeongJae Park
2022-09-13 17:44 ` [PATCH 17/22] mm/damon/lru_sort: use stat generator SeongJae Park
2022-09-13 17:44 ` [PATCH 18/22] mm/damon/modules-common: implement a damos quota params generator SeongJae Park
2022-09-13 17:44 ` [PATCH 19/22] mm/damon/modules-common: implement damos time " SeongJae Park
2022-09-13 17:44 ` [PATCH 20/22] mm/damon/reclaim: use the quota params generator macro SeongJae Park
2022-09-13 17:44 ` [PATCH 21/22] mm/damon/lru_sort: use quotas param generator SeongJae Park
2022-09-13 17:44 ` [PATCH 22/22] mm/damon/lru_sort: deduplicate hot/cold schemes generators SeongJae Park

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220913174449.50645-15-sj@kernel.org \
    --to=sj@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=damon@lists.linux.dev \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.