All of lore.kernel.org
 help / color / mirror / Atom feed
From: Prathamesh Shete <pshete@nvidia.com>
To: <adrian.hunter@intel.com>, <ulf.hansson@linaro.org>,
	<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
	<p.zabel@pengutronix.de>, <linux-mmc@vger.kernel.org>,
	<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <anrao@nvidia.com>, <smangipudi@nvidia.com>, <pshete@nvidia.com>,
	<kyarlagadda@nvidia.com>
Subject: [PATCH v2 2/4] mmc: sdhci-tegra: Add support to program MC streamID
Date: Wed, 14 Sep 2022 15:26:26 +0530	[thread overview]
Message-ID: <20220914095628.26093-2-pshete@nvidia.com> (raw)
In-Reply-To: <20220914095628.26093-1-pshete@nvidia.com>

As per T23x MSS IAS SMMU clients are supposed
to program streamid from their respective address spaces instead of MC
override
Define NVQUIRK_PROGRAM_MC_STREAMID and use it to program SMMU streamid
from the SDMMC client address space

Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
---
 drivers/mmc/host/sdhci-tegra.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index a6c5bbae77b4..b66b0cc51497 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -25,6 +25,7 @@
 #include <linux/mmc/slot-gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/ktime.h>
+#include <linux/iommu.h>
 
 #include <soc/tegra/common.h>
 
@@ -94,6 +95,8 @@
 #define SDHCI_TEGRA_AUTO_CAL_STATUS			0x1ec
 #define SDHCI_TEGRA_AUTO_CAL_ACTIVE			BIT(31)
 
+#define SDHCI_TEGRA_CIF2AXI_CTRL_0			0x1fc
+
 #define NVQUIRK_FORCE_SDHCI_SPEC_200			BIT(0)
 #define NVQUIRK_ENABLE_BLOCK_GAP_DET			BIT(1)
 #define NVQUIRK_ENABLE_SDHCI_SPEC_300			BIT(2)
@@ -121,6 +124,7 @@
 #define NVQUIRK_HAS_TMCLK				BIT(10)
 
 #define NVQUIRK_HAS_ANDROID_GPT_SECTOR			BIT(11)
+#define NVQUIRK_PROGRAM_MC_STREAMID			BIT(17)
 
 /* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */
 #define SDHCI_TEGRA_CQE_BASE_ADDR			0xF000
@@ -177,6 +181,7 @@ struct sdhci_tegra {
 	bool enable_hwcq;
 	unsigned long curr_clk_rate;
 	u8 tuned_tap_delay;
+	u32 streamid;
 };
 
 static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
@@ -1564,6 +1569,7 @@ static const struct sdhci_tegra_soc_data soc_data_tegra234 = {
 		    NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
 		    NVQUIRK_ENABLE_SDR50 |
 		    NVQUIRK_ENABLE_SDR104 |
+		    NVQUIRK_PROGRAM_MC_STREAMID |
 		    NVQUIRK_HAS_TMCLK,
 	.min_tap_delay = 95,
 	.max_tap_delay = 111,
@@ -1637,6 +1643,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 	struct sdhci_pltfm_host *pltfm_host;
 	struct sdhci_tegra *tegra_host;
 	struct clk *clk;
+	struct iommu_fwspec *fwspec;
 	int rc;
 
 	soc_data = of_device_get_match_data(&pdev->dev);
@@ -1775,6 +1782,23 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 	if (rc)
 		goto err_add_host;
 
+	/* Program MC streamID for DMA transfers */
+	if (soc_data->nvquirks & NVQUIRK_PROGRAM_MC_STREAMID) {
+		fwspec = dev_iommu_fwspec_get(&pdev->dev);
+		if (fwspec == NULL) {
+			rc = -ENODEV;
+			dev_err(mmc_dev(host->mmc),
+				"failed to get MC streamid: %d\n",
+				rc);
+			goto err_rst_get;
+		} else {
+			tegra_host->streamid = fwspec->ids[0] & 0xffff;
+			tegra_sdhci_writel(host, tegra_host->streamid |
+						(tegra_host->streamid << 8),
+						SDHCI_TEGRA_CIF2AXI_CTRL_0);
+		}
+	}
+
 	return 0;
 
 err_add_host:
@@ -1861,6 +1885,8 @@ static int sdhci_tegra_suspend(struct device *dev)
 static int sdhci_tegra_resume(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
 	int ret;
 
 	ret = mmc_gpio_set_cd_wake(host->mmc, false);
@@ -1871,6 +1897,13 @@ static int sdhci_tegra_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	/* Re-program MC streamID for DMA transfers */
+	if (tegra_host->soc_data->nvquirks & NVQUIRK_PROGRAM_MC_STREAMID) {
+		tegra_sdhci_writel(host, tegra_host->streamid |
+					(tegra_host->streamid << 8),
+					SDHCI_TEGRA_CIF2AXI_CTRL_0);
+	}
+
 	ret = sdhci_resume_host(host);
 	if (ret)
 		goto disable_clk;
-- 
2.17.1


  reply	other threads:[~2022-09-14  9:57 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-14  9:56 [PATCH v2 1/4] mmc: sdhci-tegra: Separate T19x and T23x SoC data Prathamesh Shete
2022-09-14  9:56 ` Prathamesh Shete [this message]
2022-09-14 12:11   ` [PATCH v2 2/4] mmc: sdhci-tegra: Add support to program MC streamID Thierry Reding
2022-09-15 20:21   ` kernel test robot
2022-09-14  9:56 ` [PATCH v2 3/4] mmc: sdhci-tegra: Issue CMD and DAT resets together Prathamesh Shete
2022-09-14 12:20   ` Thierry Reding
2022-09-14 18:21     ` Adrian Hunter
2022-09-15 10:56       ` Thierry Reding
2022-09-14  9:56 ` [PATCH v2 4/4] mmc: sdhci-tegra: Use actual clock rate for SW tuning correction Prathamesh Shete
2022-09-14 12:24   ` Thierry Reding
2022-09-14 10:40 ` [PATCH v2 1/4] mmc: sdhci-tegra: Separate T19x and T23x SoC data Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220914095628.26093-2-pshete@nvidia.com \
    --to=pshete@nvidia.com \
    --cc=adrian.hunter@intel.com \
    --cc=anrao@nvidia.com \
    --cc=jonathanh@nvidia.com \
    --cc=kyarlagadda@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=smangipudi@nvidia.com \
    --cc=thierry.reding@gmail.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.