Re: [PATCH 08/15] rt2x00: don't run Rt5592 IQ calibration on MT7620

[Stanislaw Gruszka <stf_xl@wp.pl>]

On Sat, Sep 17, 2022 at 12:06:39AM +0100, Daniel Golle wrote:
> The function rt2800_iq_calibrate is intended for Rt5592 only.
> Don't call it for MT7620 which has it's own calibration functions.
> 
> Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> ---
>  drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
> index 6e5a72cf2a81a0..55a46e27b59875 100644
> --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
> +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
> @@ -4365,7 +4365,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
>  		reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2*rt2x00dev->lna_gain;
>  		rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
>  
> -		rt2800_iq_calibrate(rt2x00dev, rf->channel);
> +		if (!rt2x00_rt(rt2x00dev, RT6352))

Since is needed for rt5992 that check would be more appropriate.