From: Nicholas Miehlbradt <nicholas@linux.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Subject: [PATCH 4/4] powerpc/64s: Enable KFENCE on book3s64
Date: Mon, 19 Sep 2022 01:44:37 +0000 [thread overview]
Message-ID: <20220919014437.608167-4-nicholas@linux.ibm.com> (raw)
In-Reply-To: <20220919014437.608167-1-nicholas@linux.ibm.com>
KFENCE support was added for ppc32 in commit 90cbac0e995d
("powerpc: Enable KFENCE for PPC32").
Enable KFENCE on ppc64 architecture with hash and radix MMUs.
It uses the same mechanism as debug pagealloc to
protect/unprotect pages. All KFENCE kunit tests pass on both
MMUs.
KFENCE memory is initially allocated using memblock but is
later marked as SLAB allocated. This necessitates the change
to __pud_free to ensure that the KFENCE pages are freed
appropriately.
Based on previous work by Christophe Leroy and Jordan Niethe.
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
---
arch/powerpc/Kconfig | 2 +-
arch/powerpc/include/asm/book3s/64/pgalloc.h | 6 ++++--
arch/powerpc/include/asm/book3s/64/pgtable.h | 2 +-
arch/powerpc/include/asm/kfence.h | 18 ++++++++++++++++++
arch/powerpc/mm/book3s64/hash_utils.c | 10 +++++-----
arch/powerpc/mm/book3s64/radix_pgtable.c | 8 +++++---
6 files changed, 34 insertions(+), 12 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a4f8a5276e5c..f7dd0f49510d 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -194,7 +194,7 @@ config PPC
select HAVE_ARCH_KASAN if PPC32 && PPC_PAGE_SHIFT <= 14
select HAVE_ARCH_KASAN if PPC_RADIX_MMU
select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
- select HAVE_ARCH_KFENCE if PPC_BOOK3S_32 || PPC_8xx || 40x
+ select HAVE_ARCH_KFENCE if ARCH_SUPPORTS_DEBUG_PAGEALLOC
select HAVE_ARCH_KGDB
select HAVE_ARCH_MMAP_RND_BITS
select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
diff --git a/arch/powerpc/include/asm/book3s/64/pgalloc.h b/arch/powerpc/include/asm/book3s/64/pgalloc.h
index e1af0b394ceb..dd2cff53a111 100644
--- a/arch/powerpc/include/asm/book3s/64/pgalloc.h
+++ b/arch/powerpc/include/asm/book3s/64/pgalloc.h
@@ -113,9 +113,11 @@ static inline void __pud_free(pud_t *pud)
/*
* Early pud pages allocated via memblock allocator
- * can't be directly freed to slab
+ * can't be directly freed to slab. KFENCE pages have
+ * both reserved and slab flags set so need to be freed
+ * kmem_cache_free.
*/
- if (PageReserved(page))
+ if (PageReserved(page) && !PageSlab(page))
free_reserved_page(page);
else
kmem_cache_free(PGT_CACHE(PUD_CACHE_INDEX), pud);
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index cb9d5fd39d7f..fd5d800f2836 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -1123,7 +1123,7 @@ static inline void vmemmap_remove_mapping(unsigned long start,
}
#endif
-#ifdef CONFIG_DEBUG_PAGEALLOC
+#if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KFENCE)
static inline void __kernel_map_pages(struct page *page, int numpages, int enable)
{
if (radix_enabled())
diff --git a/arch/powerpc/include/asm/kfence.h b/arch/powerpc/include/asm/kfence.h
index a9846b68c6b9..33edbc312a51 100644
--- a/arch/powerpc/include/asm/kfence.h
+++ b/arch/powerpc/include/asm/kfence.h
@@ -11,11 +11,28 @@
#include <linux/mm.h>
#include <asm/pgtable.h>
+#if defined(CONFIG_PPC64) && !defined(CONFIG_PPC64_ELF_ABI_V2)
+#define ARCH_FUNC_PREFIX "."
+#endif
+
static inline bool arch_kfence_init_pool(void)
{
return true;
}
+#ifdef CONFIG_PPC64
+static inline bool kfence_protect_page(unsigned long addr, bool protect)
+{
+ struct page *page = virt_to_page(addr);
+
+ if (protect)
+ __kernel_map_pages(page, 1, 0);
+ else
+ __kernel_map_pages(page, 1, 1);
+
+ return true;
+}
+#else
static inline bool kfence_protect_page(unsigned long addr, bool protect)
{
pte_t *kpte = virt_to_kpte(addr);
@@ -29,5 +46,6 @@ static inline bool kfence_protect_page(unsigned long addr, bool protect)
return true;
}
+#endif
#endif /* __ASM_POWERPC_KFENCE_H */
diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c
index b37412fe5930..9cceaa5998a3 100644
--- a/arch/powerpc/mm/book3s64/hash_utils.c
+++ b/arch/powerpc/mm/book3s64/hash_utils.c
@@ -424,7 +424,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
break;
cond_resched();
- if (debug_pagealloc_enabled() &&
+ if (debug_pagealloc_enabled_or_kfence() &&
(paddr >> PAGE_SHIFT) < linear_map_hash_count)
linear_map_hash_slots[paddr >> PAGE_SHIFT] = ret | 0x80;
}
@@ -773,7 +773,7 @@ static void __init htab_init_page_sizes(void)
bool aligned = true;
init_hpte_page_sizes();
- if (!debug_pagealloc_enabled()) {
+ if (!debug_pagealloc_enabled_or_kfence()) {
/*
* Pick a size for the linear mapping. Currently, we only
* support 16M, 1M and 4K which is the default
@@ -1061,7 +1061,7 @@ static void __init htab_initialize(void)
prot = pgprot_val(PAGE_KERNEL);
- if (debug_pagealloc_enabled()) {
+ if (debug_pagealloc_enabled_or_kfence()) {
linear_map_hash_count = memblock_end_of_DRAM() >> PAGE_SHIFT;
linear_map_hash_slots = memblock_alloc_try_nid(
linear_map_hash_count, 1, MEMBLOCK_LOW_LIMIT,
@@ -1983,7 +1983,7 @@ long hpte_insert_repeating(unsigned long hash, unsigned long vpn,
return slot;
}
-#ifdef CONFIG_DEBUG_PAGEALLOC
+#if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KFENCE)
static DEFINE_SPINLOCK(linear_map_hash_lock);
static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi)
@@ -2056,7 +2056,7 @@ void hash__kernel_map_pages(struct page *page, int numpages, int enable)
}
local_irq_restore(flags);
}
-#endif /* CONFIG_DEBUG_PAGEALLOC */
+#endif /* CONFIG_DEBUG_PAGEALLOC || CONFIG_KFENCE */
void hash__setup_initial_memory_limit(phys_addr_t first_memblock_base,
phys_addr_t first_memblock_size)
diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c
index 483c99bfbde5..217833fe4f34 100644
--- a/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -34,6 +34,8 @@
#include <trace/events/thp.h>
+#include <mm/mmu_decl.h>
+
unsigned int mmu_base_pid;
unsigned long radix_mem_block_size __ro_after_init;
@@ -504,7 +506,7 @@ static unsigned long __init radix_memory_block_size(void)
{
unsigned long mem_block_size = MIN_MEMORY_BLOCK_SIZE;
- if (debug_pagealloc_enabled())
+ if (debug_pagealloc_enabled_or_kfence())
return PAGE_SIZE;
/*
@@ -523,7 +525,7 @@ static unsigned long __init radix_memory_block_size(void)
static unsigned long __init radix_memory_block_size(void)
{
- if (debug_pagealloc_enabled())
+ if (debug_pagealloc_enabled_or_kfence())
return PAGE_SIZE;
return 1UL * 1024 * 1024 * 1024;
@@ -903,7 +905,7 @@ void __meminit radix__vmemmap_remove_mapping(unsigned long start, unsigned long
#endif
#endif
-#ifdef CONFIG_DEBUG_PAGEALLOC
+#if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KFENCE)
void radix__kernel_map_pages(struct page *page, int numpages, int enable)
{
unsigned long addr;
--
2.34.1
next prev parent reply other threads:[~2022-09-19 1:49 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-19 1:44 [PATCH 1/4] powerpc/64s: Add DEBUG_PAGEALLOC for radix Nicholas Miehlbradt
2022-09-19 1:44 ` [PATCH 2/4] powerpc/64s: Remove unneeded #ifdef CONFIG_DEBUG_PAGEALLOC in hash_utils Nicholas Miehlbradt
2022-09-19 1:44 ` [PATCH 3/4] powerpc/64s: Allow double call of kernel_[un]map_linear_page() Nicholas Miehlbradt
2022-09-19 1:44 ` Nicholas Miehlbradt [this message]
2022-09-19 6:20 ` [PATCH 4/4] powerpc/64s: Enable KFENCE on book3s64 Christophe Leroy
2022-09-19 6:17 ` [PATCH 1/4] powerpc/64s: Add DEBUG_PAGEALLOC for radix Christophe Leroy
2022-09-19 7:00 ` Michael Ellerman
2022-09-19 7:05 ` Christophe Leroy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220919014437.608167-4-nicholas@linux.ibm.com \
--to=nicholas@linux.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.