[PATCH v2 2/5] hisi_acc_vfio_pci: Fix device data address combination problem

[Longfang Liu <liulongfang@huawei.com>]

The queue address of the accelerator device should be combined into
a dma address in a way of combining the low and high bits.
The previous combination is wrong and needs to be modified.

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
---
 drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
index 7ce656a7cf5c..0638a8a6b0c1 100644
--- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
+++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
@@ -528,12 +528,12 @@ static int vf_qm_state_save(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 		return -EINVAL;
 
 	/* Every reg is 32 bit, the dma address is 64 bit. */
-	vf_data->eqe_dma = vf_data->qm_eqc_dw[2];
+	vf_data->eqe_dma = vf_data->qm_eqc_dw[1];
 	vf_data->eqe_dma <<= QM_XQC_ADDR_OFFSET;
-	vf_data->eqe_dma |= vf_data->qm_eqc_dw[1];
-	vf_data->aeqe_dma = vf_data->qm_aeqc_dw[2];
+	vf_data->eqe_dma |= vf_data->qm_eqc_dw[0];
+	vf_data->aeqe_dma = vf_data->qm_aeqc_dw[1];
 	vf_data->aeqe_dma <<= QM_XQC_ADDR_OFFSET;
-	vf_data->aeqe_dma |= vf_data->qm_aeqc_dw[1];
+	vf_data->aeqe_dma |= vf_data->qm_aeqc_dw[0];
 
 	/* Through SQC_BT/CQC_BT to get sqc and cqc address */
 	ret = qm_get_sqc(vf_qm, &vf_data->sqc_dma);
-- 
2.33.0