From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org, zhengqi.arch@bytedance.com,
willy@infradead.org, will@kernel.org, vbabka@suse.cz,
vaibhav@linux.ibm.com, torvalds@linux-foundation.org,
tj@kernel.org, szhai2@cs.rochester.edu, suleiman@google.com,
steven@liquorix.net, sofia.trinh@edi.works, rppt@linux.ibm.com,
rppt@kernel.org, peterz@infradead.org, oleksandr@natalenko.name,
Michael@MichaelLarabel.com, mhocko@kernel.org, mgorman@suse.de,
linmiaohe@huawei.com, holger@applied-asynchrony.com,
Hi-Angel@yandex.ru, heftig@archlinux.org, hdanton@sina.com,
hannes@cmpxchg.org, djbyrne@mtu.edu, d@chaos-reins.com,
dave.hansen@linux.intel.com, corbet@lwn.net,
catalin.marinas@arm.com, bgeffon@google.com, baohua@kernel.org,
axboe@kernel.dk, aneesh.kumar@linux.ibm.com, ak@linux.intel.com,
yuzhao@google.com, akpm@linux-foundation.org
Subject: [merged mm-stable] mm-vmscanc-refactor-shrink_node.patch removed from -mm tree
Date: Mon, 26 Sep 2022 19:47:52 -0700 [thread overview]
Message-ID: <20220927024753.6364BC433D7@smtp.kernel.org> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 9337 bytes --]
The quilt patch titled
Subject: mm/vmscan.c: refactor shrink_node()
has been removed from the -mm tree. Its filename was
mm-vmscanc-refactor-shrink_node.patch
This patch was dropped because it was merged into the mm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: Yu Zhao <yuzhao@google.com>
Subject: mm/vmscan.c: refactor shrink_node()
Date: Sun, 18 Sep 2022 02:00:00 -0600
This patch refactors shrink_node() to improve readability for the upcoming
changes to mm/vmscan.c.
Link: https://lkml.kernel.org/r/20220918080010.2920238-4-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/vmscan.c | 198 ++++++++++++++++++++++++++------------------------
1 file changed, 104 insertions(+), 94 deletions(-)
--- a/mm/vmscan.c~mm-vmscanc-refactor-shrink_node
+++ a/mm/vmscan.c
@@ -2728,6 +2728,109 @@ enum scan_balance {
SCAN_FILE,
};
+static void prepare_scan_count(pg_data_t *pgdat, struct scan_control *sc)
+{
+ unsigned long file;
+ struct lruvec *target_lruvec;
+
+ target_lruvec = mem_cgroup_lruvec(sc->target_mem_cgroup, pgdat);
+
+ /*
+ * Flush the memory cgroup stats, so that we read accurate per-memcg
+ * lruvec stats for heuristics.
+ */
+ mem_cgroup_flush_stats();
+
+ /*
+ * Determine the scan balance between anon and file LRUs.
+ */
+ spin_lock_irq(&target_lruvec->lru_lock);
+ sc->anon_cost = target_lruvec->anon_cost;
+ sc->file_cost = target_lruvec->file_cost;
+ spin_unlock_irq(&target_lruvec->lru_lock);
+
+ /*
+ * Target desirable inactive:active list ratios for the anon
+ * and file LRU lists.
+ */
+ if (!sc->force_deactivate) {
+ unsigned long refaults;
+
+ /*
+ * When refaults are being observed, it means a new
+ * workingset is being established. Deactivate to get
+ * rid of any stale active pages quickly.
+ */
+ refaults = lruvec_page_state(target_lruvec,
+ WORKINGSET_ACTIVATE_ANON);
+ if (refaults != target_lruvec->refaults[WORKINGSET_ANON] ||
+ inactive_is_low(target_lruvec, LRU_INACTIVE_ANON))
+ sc->may_deactivate |= DEACTIVATE_ANON;
+ else
+ sc->may_deactivate &= ~DEACTIVATE_ANON;
+
+ refaults = lruvec_page_state(target_lruvec,
+ WORKINGSET_ACTIVATE_FILE);
+ if (refaults != target_lruvec->refaults[WORKINGSET_FILE] ||
+ inactive_is_low(target_lruvec, LRU_INACTIVE_FILE))
+ sc->may_deactivate |= DEACTIVATE_FILE;
+ else
+ sc->may_deactivate &= ~DEACTIVATE_FILE;
+ } else
+ sc->may_deactivate = DEACTIVATE_ANON | DEACTIVATE_FILE;
+
+ /*
+ * If we have plenty of inactive file pages that aren't
+ * thrashing, try to reclaim those first before touching
+ * anonymous pages.
+ */
+ file = lruvec_page_state(target_lruvec, NR_INACTIVE_FILE);
+ if (file >> sc->priority && !(sc->may_deactivate & DEACTIVATE_FILE))
+ sc->cache_trim_mode = 1;
+ else
+ sc->cache_trim_mode = 0;
+
+ /*
+ * Prevent the reclaimer from falling into the cache trap: as
+ * cache pages start out inactive, every cache fault will tip
+ * the scan balance towards the file LRU. And as the file LRU
+ * shrinks, so does the window for rotation from references.
+ * This means we have a runaway feedback loop where a tiny
+ * thrashing file LRU becomes infinitely more attractive than
+ * anon pages. Try to detect this based on file LRU size.
+ */
+ if (!cgroup_reclaim(sc)) {
+ unsigned long total_high_wmark = 0;
+ unsigned long free, anon;
+ int z;
+
+ free = sum_zone_node_page_state(pgdat->node_id, NR_FREE_PAGES);
+ file = node_page_state(pgdat, NR_ACTIVE_FILE) +
+ node_page_state(pgdat, NR_INACTIVE_FILE);
+
+ for (z = 0; z < MAX_NR_ZONES; z++) {
+ struct zone *zone = &pgdat->node_zones[z];
+
+ if (!managed_zone(zone))
+ continue;
+
+ total_high_wmark += high_wmark_pages(zone);
+ }
+
+ /*
+ * Consider anon: if that's low too, this isn't a
+ * runaway file reclaim problem, but rather just
+ * extreme pressure. Reclaim as per usual then.
+ */
+ anon = node_page_state(pgdat, NR_INACTIVE_ANON);
+
+ sc->file_is_tiny =
+ file + free <= total_high_wmark &&
+ !(sc->may_deactivate & DEACTIVATE_ANON) &&
+ anon >> sc->priority;
+ }
+}
+
/*
* Determine how aggressively the anon and file LRU lists should be
* scanned.
@@ -3195,109 +3298,16 @@ static void shrink_node(pg_data_t *pgdat
unsigned long nr_reclaimed, nr_scanned;
struct lruvec *target_lruvec;
bool reclaimable = false;
- unsigned long file;
target_lruvec = mem_cgroup_lruvec(sc->target_mem_cgroup, pgdat);
again:
- /*
- * Flush the memory cgroup stats, so that we read accurate per-memcg
- * lruvec stats for heuristics.
- */
- mem_cgroup_flush_stats();
-
memset(&sc->nr, 0, sizeof(sc->nr));
nr_reclaimed = sc->nr_reclaimed;
nr_scanned = sc->nr_scanned;
- /*
- * Determine the scan balance between anon and file LRUs.
- */
- spin_lock_irq(&target_lruvec->lru_lock);
- sc->anon_cost = target_lruvec->anon_cost;
- sc->file_cost = target_lruvec->file_cost;
- spin_unlock_irq(&target_lruvec->lru_lock);
-
- /*
- * Target desirable inactive:active list ratios for the anon
- * and file LRU lists.
- */
- if (!sc->force_deactivate) {
- unsigned long refaults;
-
- /*
- * When refaults are being observed, it means a new
- * workingset is being established. Deactivate to get
- * rid of any stale active pages quickly.
- */
- refaults = lruvec_page_state(target_lruvec,
- WORKINGSET_ACTIVATE_ANON);
- if (refaults != target_lruvec->refaults[WORKINGSET_ANON] ||
- inactive_is_low(target_lruvec, LRU_INACTIVE_ANON))
- sc->may_deactivate |= DEACTIVATE_ANON;
- else
- sc->may_deactivate &= ~DEACTIVATE_ANON;
-
- refaults = lruvec_page_state(target_lruvec,
- WORKINGSET_ACTIVATE_FILE);
- if (refaults != target_lruvec->refaults[WORKINGSET_FILE] ||
- inactive_is_low(target_lruvec, LRU_INACTIVE_FILE))
- sc->may_deactivate |= DEACTIVATE_FILE;
- else
- sc->may_deactivate &= ~DEACTIVATE_FILE;
- } else
- sc->may_deactivate = DEACTIVATE_ANON | DEACTIVATE_FILE;
-
- /*
- * If we have plenty of inactive file pages that aren't
- * thrashing, try to reclaim those first before touching
- * anonymous pages.
- */
- file = lruvec_page_state(target_lruvec, NR_INACTIVE_FILE);
- if (file >> sc->priority && !(sc->may_deactivate & DEACTIVATE_FILE))
- sc->cache_trim_mode = 1;
- else
- sc->cache_trim_mode = 0;
-
- /*
- * Prevent the reclaimer from falling into the cache trap: as
- * cache pages start out inactive, every cache fault will tip
- * the scan balance towards the file LRU. And as the file LRU
- * shrinks, so does the window for rotation from references.
- * This means we have a runaway feedback loop where a tiny
- * thrashing file LRU becomes infinitely more attractive than
- * anon pages. Try to detect this based on file LRU size.
- */
- if (!cgroup_reclaim(sc)) {
- unsigned long total_high_wmark = 0;
- unsigned long free, anon;
- int z;
-
- free = sum_zone_node_page_state(pgdat->node_id, NR_FREE_PAGES);
- file = node_page_state(pgdat, NR_ACTIVE_FILE) +
- node_page_state(pgdat, NR_INACTIVE_FILE);
-
- for (z = 0; z < MAX_NR_ZONES; z++) {
- struct zone *zone = &pgdat->node_zones[z];
- if (!managed_zone(zone))
- continue;
-
- total_high_wmark += high_wmark_pages(zone);
- }
-
- /*
- * Consider anon: if that's low too, this isn't a
- * runaway file reclaim problem, but rather just
- * extreme pressure. Reclaim as per usual then.
- */
- anon = node_page_state(pgdat, NR_INACTIVE_ANON);
-
- sc->file_is_tiny =
- file + free <= total_high_wmark &&
- !(sc->may_deactivate & DEACTIVATE_ANON) &&
- anon >> sc->priority;
- }
+ prepare_scan_count(pgdat, sc);
shrink_node_memcgs(pgdat, sc);
_
Patches currently in -mm which might be from yuzhao@google.com are
reply other threads:[~2022-09-27 2:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220927024753.6364BC433D7@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=Hi-Angel@yandex.ru \
--cc=Michael@MichaelLarabel.com \
--cc=ak@linux.intel.com \
--cc=aneesh.kumar@linux.ibm.com \
--cc=axboe@kernel.dk \
--cc=baohua@kernel.org \
--cc=bgeffon@google.com \
--cc=catalin.marinas@arm.com \
--cc=corbet@lwn.net \
--cc=d@chaos-reins.com \
--cc=dave.hansen@linux.intel.com \
--cc=djbyrne@mtu.edu \
--cc=hannes@cmpxchg.org \
--cc=hdanton@sina.com \
--cc=heftig@archlinux.org \
--cc=holger@applied-asynchrony.com \
--cc=linmiaohe@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgorman@suse.de \
--cc=mhocko@kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=oleksandr@natalenko.name \
--cc=peterz@infradead.org \
--cc=rppt@kernel.org \
--cc=rppt@linux.ibm.com \
--cc=sofia.trinh@edi.works \
--cc=steven@liquorix.net \
--cc=suleiman@google.com \
--cc=szhai2@cs.rochester.edu \
--cc=tj@kernel.org \
--cc=torvalds@linux-foundation.org \
--cc=vaibhav@linux.ibm.com \
--cc=vbabka@suse.cz \
--cc=will@kernel.org \
--cc=willy@infradead.org \
--cc=yuzhao@google.com \
--cc=zhengqi.arch@bytedance.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.