All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lee Jackson <info@arducam.com>
To: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org, robh+dt@kernel.org
Subject: [PATCH 1/2] dt-bindings: media: i2c: Add IMX519 CMOS sensor binding
Date: Tue, 27 Sep 2022 11:40:47 +0800	[thread overview]
Message-ID: <20220927114047.00000a38@arducam.com> (raw)

Add YAML device tree binding for IMX519 CMOS image sensor, and
the relevant MAINTAINERS entries.

Signed-off-by: Lee Jackson <info@arducam.com>
---
 .../devicetree/bindings/media/i2c/imx519.yaml | 113 ++++++++++++++++++
 MAINTAINERS                                   |   8 ++
 2 files changed, 121 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/imx519.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/imx519.yaml b/Documentation/devicetree/bindings/media/i2c/imx519.yaml
new file mode 100644
index 000000000000..717230a21764
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx519.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx519.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/2.5-Inch 16Mpixel CMOS Digital Image Sensor
+
+maintainers:
+  - Lee Jackson <info@arducam.com>
+
+description: |-
+  The Sony IMX519 is a 1/2.5-inch CMOS active pixel digital image sensor
+  with an active array size of 4656H x 3496V. It is programmable through
+  I2C interface. The I2C address is fixed to 0x1A as per sensor data sheet.
+  Image data is sent through MIPI CSI-2, which is configured as either 2 or
+  4 data lanes.
+
+properties:
+  compatible:
+    const: sony,imx519
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  VDIG-supply:
+    description:
+      Digital I/O voltage supply, 1.05 volts
+
+  VANA-supply:
+    description:
+      Analog voltage supply, 2.8 volts
+
+  VDDL-supply:
+    description:
+      Digital core voltage supply, 1.8 volts
+
+  reset-gpios:
+    description: |-
+      Reference to the GPIO connected to the xclr pin, if any.
+      Must be released (set high) after all supplies and INCK are applied.
+
+  # See ../video-interfaces.txt for more details
+  port:
+    type: object
+    properties:
+      endpoint:
+        type: object
+        properties:
+          data-lanes:
+            description: |-
+              The sensor supports either two-lane, or four-lane operation.
+              For two-lane operation the property must be set to <1 2>.
+            items:
+              - const: 1
+              - const: 2
+
+          clock-noncontinuous:
+            type: boolean
+            description: |-
+              MIPI CSI-2 clock is non-continuous if this property is present,
+              otherwise it's continuous.
+
+          link-frequencies:
+            allOf:
+              - $ref: /schemas/types.yaml#/definitions/uint64-array
+            description:
+              Allowed data bus frequencies.
+
+        required:
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - VANA-supply
+  - VDIG-supply
+  - VDDL-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx519: sensor@1a {
+            compatible = "sony,imx519";
+            reg = <0x1a>;
+            clocks = <&imx519_clk>;
+            VANA-supply = <&imx519_vana>;   /* 2.8v */
+            VDIG-supply = <&imx519_vdig>;   /* 1.05v */
+            VDDL-supply = <&imx519_vddl>;   /* 1.8v */
+
+            port {
+                imx519_0: endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    data-lanes = <1 2>;
+                    clock-noncontinuous;
+                    link-frequencies = /bits/ 64 <493500000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index a58f1fc6dd47..a2de51d71677 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19007,6 +19007,14 @@ T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
 F:	drivers/media/i2c/imx412.c
 
+SONY IMX519 SENSOR DRIVER
+M:	Arducam Kernel Maintenance <info@arducam.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/imx519.yaml
+F:	drivers/media/i2c/imx519.c
+
 SONY MEMORYSTICK SUBSYSTEM
 M:	Maxim Levitsky <maximlevitsky@gmail.com>
 M:	Alex Dubov <oakad@yahoo.com>
-- 
2.25.1


             reply	other threads:[~2022-09-27  3:40 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-27  3:40 Lee Jackson [this message]
  -- strict thread matches above, loose matches on Subject: below --
2021-11-02  8:19 [PATCH 1/2] dt-bindings: media: i2c: Add IMX519 CMOS sensor binding Arducam info
2022-02-03 22:01 ` Sakari Ailus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220927114047.00000a38@arducam.com \
    --to=info@arducam.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.