From: Saeed Mahameed <saeed@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>,
netdev@vger.kernel.org, Tariq Toukan <tariqt@nvidia.com>,
Roi Dayan <roid@nvidia.com>, Maor Dickman <maord@nvidia.com>
Subject: [PATCH net-next 13/15] net/mlx5: E-Switch, Allow offloading fwd dest flow table with vport
Date: Sat, 1 Oct 2022 21:56:30 -0700 [thread overview]
Message-ID: <20221002045632.291612-14-saeed@kernel.org> (raw)
In-Reply-To: <20221002045632.291612-1-saeed@kernel.org>
From: Roi Dayan <roid@nvidia.com>
Before this commit a fwd dest flow table resulted in ignoring vport dests
which is incorrect and is supported.
With this commit the dests can be a mix of flow table and vport dests.
There is still a limitation that there cannot be more than one flow table dest.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
.../mellanox/mlx5/core/eswitch_offloads.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index c98c6af21581..4e50df3139c6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -483,25 +483,27 @@ esw_setup_dests(struct mlx5_flow_destination *dest,
!(attr->flags & MLX5_ATTR_FLAG_SLOW_PATH)) {
esw_setup_sampler_dest(dest, flow_act, attr->sample_attr.sampler_id, *i);
(*i)++;
- } else if (attr->dest_ft) {
- esw_setup_ft_dest(dest, flow_act, esw, attr, spec, *i);
- (*i)++;
} else if (attr->flags & MLX5_ATTR_FLAG_SLOW_PATH) {
esw_setup_slow_path_dest(dest, flow_act, esw, *i);
(*i)++;
} else if (attr->flags & MLX5_ATTR_FLAG_ACCEPT) {
esw_setup_accept_dest(dest, flow_act, chains, *i);
(*i)++;
- } else if (attr->dest_chain) {
- err = esw_setup_chain_dest(dest, flow_act, chains, attr->dest_chain,
- 1, 0, *i);
- (*i)++;
} else if (esw_is_indir_table(esw, attr)) {
err = esw_setup_indir_table(dest, flow_act, esw, attr, spec, true, i);
} else if (esw_is_chain_src_port_rewrite(esw, esw_attr)) {
err = esw_setup_chain_src_port_rewrite(dest, flow_act, esw, chains, attr, i);
} else {
*i = esw_setup_vport_dests(dest, flow_act, esw, esw_attr, *i);
+
+ if (attr->dest_ft) {
+ err = esw_setup_ft_dest(dest, flow_act, esw, attr, spec, *i);
+ (*i)++;
+ } else if (attr->dest_chain) {
+ err = esw_setup_chain_dest(dest, flow_act, chains, attr->dest_chain,
+ 1, 0, *i);
+ (*i)++;
+ }
}
return err;
--
2.37.3
next prev parent reply other threads:[~2022-10-02 5:14 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-02 4:56 [PATCH net-next 00/15] ] mlx5 xsk updates part4 and more Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 01/15] net/mlx5e: xsk: Flush RQ on XSK activation to save memory Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 02/15] net/mlx5e: xsk: Set napi_id to support busy polling Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 03/15] net/mlx5e: xsk: Include XSK skb_from_cqe callbacks in INDIRECT_CALL Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 04/15] net/mlx5e: xsk: Improve need_wakeup logic Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 05/15] net/mlx5e: xsk: Use umr_mode to calculate striding RQ parameters Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 06/15] net/mlx5e: Improve MTT/KSM alignment Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 07/15] net/mlx5e: xsk: Use KLM to protect frame overrun in unaligned mode Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 08/15] net/mlx5e: xsk: Print a warning in slow configurations Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 09/15] net/mlx5e: xsk: Optimize for unaligned mode with 3072-byte frames Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 10/15] net/mlx5e: Expose rx_oversize_pkts_buffer counter Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 11/15] net/mlx5: Start health poll at earlier stage of driver load Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 12/15] net/mlx5: Set default grace period based on function type Saeed Mahameed
2022-10-02 4:56 ` Saeed Mahameed [this message]
2022-10-02 4:56 ` [PATCH net-next 14/15] net/mlx5: E-switch, Don't update group if qos is not enabled Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 15/15] net/mlx5: E-Switch, Return EBUSY if can't get mode lock Saeed Mahameed
2022-10-04 0:10 ` [PATCH net-next 00/15] ] mlx5 xsk updates part4 and more patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221002045632.291612-14-saeed@kernel.org \
--to=saeed@kernel.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=maord@nvidia.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=roid@nvidia.com \
--cc=saeedm@nvidia.com \
--cc=tariqt@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.