From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: rafael@kernel.org
Cc: linux-acpi@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org, Zhang Rui <rui.zhang@intel.com>,
Len Brown <lenb@kernel.org>
Subject: [PATCH RFC 4/9] thermal/acpi: Move the active trip points to the same array
Date: Tue, 4 Oct 2022 19:26:53 +0200 [thread overview]
Message-ID: <20221004172658.2302511-5-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <20221004172658.2302511-1-daniel.lezcano@linaro.org>
This change does the second pass to move the active trip points in the
thermal trip array.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/acpi/thermal.c | 75 +++++++++++++++++++++---------------------
1 file changed, 37 insertions(+), 38 deletions(-)
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 8bf2b25acdf1..ce37494bd133 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -153,7 +153,6 @@ struct acpi_thermal {
struct acpi_thermal_flags flags;
struct acpi_thermal_state state;
struct acpi_thermal_trip trips[ACPI_THERMAL_TRIP_MAX];
- struct acpi_thermal_trip active[ACPI_THERMAL_MAX_ACTIVE];
struct acpi_handle_list devices;
struct thermal_zone_device *thermal_zone;
int kelvin_offset; /* in millidegrees */
@@ -383,68 +382,68 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
}
/* Active (optional) */
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+ for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
- valid = tz->active[i].flags.valid;
+ valid = tz->trips[i].flags.valid;
if (act == -1)
break; /* disable all active trip points */
if ((flag == ACPI_TRIPS_INIT) || ((flag & ACPI_TRIPS_ACTIVE) &&
- tz->active[i].flags.valid)) {
+ tz->trips[i].flags.valid)) {
status = acpi_evaluate_integer(tz->device->handle,
name, NULL, &tmp);
if (ACPI_FAILURE(status)) {
- tz->active[i].flags.valid = 0;
+ tz->trips[i].flags.valid = 0;
if (i == 0)
break;
if (act <= 0)
break;
if (i == 1)
- tz->active[0].temperature =
+ tz->trips[0].temperature =
celsius_to_deci_kelvin(act);
else
/*
* Don't allow override higher than
* the next higher trip point
*/
- tz->active[i - 1].temperature =
- (tz->active[i - 2].temperature <
+ tz->trips[i - 1].temperature =
+ (tz->trips[i - 2].temperature <
celsius_to_deci_kelvin(act) ?
- tz->active[i - 2].temperature :
+ tz->trips[i - 2].temperature :
celsius_to_deci_kelvin(act));
break;
} else {
- tz->active[i].temperature = tmp;
- tz->active[i].flags.valid = 1;
+ tz->trips[i].temperature = tmp;
+ tz->trips[i].flags.valid = 1;
}
}
name[2] = 'L';
- if ((flag & ACPI_TRIPS_DEVICES) && tz->active[i].flags.valid ) {
+ if ((flag & ACPI_TRIPS_DEVICES) && tz->trips[i].flags.valid ) {
memset(&devices, 0, sizeof(struct acpi_handle_list));
status = acpi_evaluate_reference(tz->device->handle,
name, NULL, &devices);
if (ACPI_FAILURE(status)) {
acpi_handle_info(tz->device->handle,
"Invalid active%d threshold\n", i);
- tz->active[i].flags.valid = 0;
+ tz->trips[i].flags.valid = 0;
}
else
- tz->active[i].flags.valid = 1;
+ tz->trips[i].flags.valid = 1;
- if (memcmp(&tz->active[i].devices, &devices,
+ if (memcmp(&tz->trips[i].devices, &devices,
sizeof(struct acpi_handle_list))) {
- memcpy(&tz->active[i].devices, &devices,
+ memcpy(&tz->trips[i].devices, &devices,
sizeof(struct acpi_handle_list));
ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "device");
}
}
if ((flag & ACPI_TRIPS_ACTIVE) || (flag & ACPI_TRIPS_DEVICES))
- if (valid != tz->active[i].flags.valid)
+ if (valid != tz->trips[i].flags.valid)
ACPI_THERMAL_TRIPS_EXCEPTION(flag, tz, "state");
- if (!tz->active[i].flags.valid)
+ if (!tz->trips[i].flags.valid)
break;
}
@@ -473,8 +472,8 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
tz->trips[ACPI_THERMAL_TRIP_HOT].flags.valid |
tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid;
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
- valid |= tz->active[i].flags.valid;
+ for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE; i++)
+ valid |= tz->trips[i].flags.valid;
if (!valid) {
pr_warn(FW_BUG "No valid trip found\n");
@@ -535,8 +534,8 @@ static int thermal_get_trip_type(struct thermal_zone_device *thermal,
trip--;
}
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
- tz->active[i].flags.valid; i++) {
+ for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE &&
+ tz->trips[i].flags.valid; i++) {
if (!trip) {
*type = THERMAL_TRIP_ACTIVE;
return 0;
@@ -586,11 +585,11 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
trip--;
}
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
- tz->active[i].flags.valid; i++) {
+ for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE &&
+ tz->trips[i].flags.valid; i++) {
if (!trip) {
*temp = deci_kelvin_to_millicelsius_with_offset(
- tz->active[i].temperature,
+ tz->trips[i].temperature,
tz->kelvin_offset);
return 0;
}
@@ -719,14 +718,14 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
}
}
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
- if (!tz->active[i].flags.valid)
+ for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+ if (!tz->trips[i].flags.valid)
break;
trip++;
for (j = 0;
- j < tz->active[i].devices.count;
+ j < tz->trips[i].devices.count;
j++) {
- handle = tz->active[i].devices.handles[j];
+ handle = tz->trips[i].devices.handles[j];
dev = acpi_fetch_acpi_dev(handle);
if (dev != device)
continue;
@@ -789,8 +788,8 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
if (tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid)
trips++;
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
- tz->active[i].flags.valid; i++, trips++);
+ for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE &&
+ tz->trips[i].flags.valid; i++, trips++);
if (tz->trips[ACPI_THERMAL_TRIP_PASSIVE].flags.valid)
tz->thermal_zone =
@@ -1083,20 +1082,20 @@ static int acpi_thermal_resume(struct device *dev)
if (!tz)
return -EINVAL;
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
- if (!tz->active[i].flags.valid)
+ for (i = ACPI_THERMAL_TRIP_ACTIVE; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+ if (!tz->trips[i].flags.valid)
break;
- tz->active[i].flags.enabled = 1;
- for (j = 0; j < tz->active[i].devices.count; j++) {
+ tz->trips[i].flags.enabled = 1;
+ for (j = 0; j < tz->trips[i].devices.count; j++) {
result = acpi_bus_update_power(
- tz->active[i].devices.handles[j],
+ tz->trips[i].devices.handles[j],
&power_state);
if (result || (power_state != ACPI_STATE_D0)) {
- tz->active[i].flags.enabled = 0;
+ tz->trips[i].flags.enabled = 0;
break;
}
}
- tz->state.active |= tz->active[i].flags.enabled;
+ tz->state.active |= tz->trips[i].flags.enabled;
}
acpi_queue_thermal_check(tz);
--
2.34.1
next prev parent reply other threads:[~2022-10-04 17:27 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-04 16:28 [PATCH v1 0/3] ACPI: thermal: Clean up simple things Rafael J. Wysocki
2022-10-04 16:31 ` [PATCH v1 1/3] ACPI: thermal: Use white space more consistently Rafael J. Wysocki
2022-10-05 6:58 ` Daniel Lezcano
2022-10-04 16:32 ` [PATCH v1 2/3] ACPI: thermal: Drop redundant parens from expressions Rafael J. Wysocki
2022-10-05 6:59 ` Daniel Lezcano
2022-10-04 16:32 ` [PATCH v1 3/3] ACPI: thermal: Drop some redundant code Rafael J. Wysocki
2022-10-05 7:00 ` Daniel Lezcano
2022-10-04 16:45 ` [PATCH v1 0/3] ACPI: thermal: Clean up simple things Daniel Lezcano
2022-10-04 16:46 ` Rafael J. Wysocki
2022-10-04 17:26 ` [PATCH RFC 0/9] ACPI thermal cleanups Daniel Lezcano
2022-10-04 17:26 ` [PATCH RFC 1/9] thermal/acpi: Remove the intermediate acpi_thermal_trip structure Daniel Lezcano
2022-10-04 17:26 ` [PATCH RFC 2/9] thermal/acpi: Change to a common " Daniel Lezcano
2022-10-04 17:26 ` [PATCH RFC 3/9] thermal/acpi: Convert the acpi thermal trips to an array Daniel Lezcano
2022-10-04 17:26 ` Daniel Lezcano [this message]
2022-10-04 17:26 ` [PATCH RFC 5/9] thermal/acpi: Optimize get_trip_points() Daniel Lezcano
2022-10-04 17:26 ` [PATCH RFC 6/9] thermal/acpi: Encapsualte in functions the trip initialization Daniel Lezcano
2022-10-04 17:26 ` [PATCH RFC 7/9] thermal/acpi: Simplifify the condition check Daniel Lezcano
2022-10-04 17:26 ` [PATCH RFC 8/9] thermal/acpi: Remove active and enabled flags Daniel Lezcano
2022-10-04 17:26 ` [PATCH RFC 9/9] thermal/acpi: Rewrite the trip point intialization to use the generic thermal trip Daniel Lezcano
2022-10-05 0:42 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221004172658.2302511-5-daniel.lezcano@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.