[libgpiod v2][PATCH v3 5/5] tools: gpiowatch tests

[Kent Gibson <warthog618@gmail.com>]

Extend the tool test suite to cover the gpiowatch tool.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
 tools/gpio-tools-test.bats | 503 +++++++++++++++++++++++++++++++++++++
 1 file changed, 503 insertions(+)

diff --git a/tools/gpio-tools-test.bats b/tools/gpio-tools-test.bats
index 6c12ffc..e42576b 100755
--- a/tools/gpio-tools-test.bats
+++ b/tools/gpio-tools-test.bats
@@ -2318,3 +2318,506 @@ request_release_line() {
 	dut_read
 	output_is "%x"
 }
+
+#
+# gpiowatch test cases
+#
+
+@test "gpiowatch: by name" {
+	gpiosim_chip sim0 num_lines=8 line_name=4:foo
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner foo
+	dut_regex_match "Watching line .*"
+
+	request_release_line $sim0 4
+
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+foo"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+foo"
+	# tools currently have no way to generate a reconfig event
+}
+
+@test "gpiowatch: by offset" {
+	gpiosim_chip sim0 num_lines=8
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --chip $sim0 4
+	dut_regex_match "Watching line .*"
+
+	request_release_line $sim0 4
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 4"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 4"
+
+	assert_fail dut_readable
+}
+
+@test "gpiowatch: by symlink" {
+	gpiosim_chip sim0 num_lines=8
+	gpiosim_chip_symlink sim0 .
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --chip $GPIOSIM_CHIP_LINK 4
+	dut_regex_match "Watching line .*"
+
+	request_release_line $sim0 4
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0\\s+4"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0\\s+4"
+
+	assert_fail dut_readable
+}
+
+@test "gpiowatch: by chip and name" {
+	gpiosim_chip sim0 num_lines=8 line_name=4:foo
+	gpiosim_chip sim1 num_lines=8 line_name=2:foo
+
+	local sim1=${GPIOSIM_CHIP_NAME[sim1]}
+
+	dut_run gpiowatch --banner --chip $sim1 foo
+	dut_regex_match "Watching line .*"
+
+	request_release_line $sim1 2
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim1 2 foo"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim1 2 foo"
+
+	assert_fail dut_readable
+}
+
+@test "gpiowatch: first matching named line" {
+	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar \
+				      line_name=3:foobar
+	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=2:foobar \
+				      line_name=4:xyz line_name=7:foobar
+	gpiosim_chip sim2 num_lines=16
+
+	dut_run gpiowatch --banner foobar
+	dut_regex_match "Watching line .*"
+
+	request_release_line ${GPIOSIM_CHIP_NAME[sim0]} 3
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+foobar"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+foobar"
+
+	assert_fail dut_readable
+}
+
+@test "gpiowatch: with requested" {
+	gpiosim_chip sim0 num_lines=8
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	gpiosim_set_pull sim0 4 pull-up
+
+	dut_run gpiowatch --banner --event=requested --chip $sim0 4
+	dut_flush
+
+	request_release_line ${GPIOSIM_CHIP_NAME[sim0]} 4
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 4"
+	assert_fail dut_readable
+}
+
+@test "gpiowatch: with released" {
+	gpiosim_chip sim0 num_lines=8
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	gpiosim_set_pull sim0 4 pull-down
+
+	dut_run gpiowatch --banner --event=released --chip $sim0 4
+	dut_flush
+
+	request_release_line ${GPIOSIM_CHIP_NAME[sim0]} 4
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 4"
+	assert_fail dut_readable
+}
+
+@test "gpiowatch: with quiet mode" {
+	gpiosim_chip sim0 num_lines=8
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --quiet --chip $sim0 4
+	dut_flush
+
+	request_release_line ${GPIOSIM_CHIP_NAME[sim0]} 4
+	assert_fail dut_readable
+}
+
+@test "gpiowatch: with num-events" {
+	gpiosim_chip sim0 num_lines=8
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	# redirect, as gpiowatch exits after 4 events
+	dut_run_redirect gpiowatch --num-events=4 --chip $sim0 3 4
+
+
+	request_release_line ${GPIOSIM_CHIP_NAME[sim0]} 4
+	request_release_line ${GPIOSIM_CHIP_NAME[sim0]} 3
+
+	dut_wait
+	status_is 0
+	dut_read_redirect
+
+	regex_matches "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 4" "${lines[0]}"
+	regex_matches "[0-9]+\.[0-9]+\\s+released\\s+$sim0 4" "${lines[1]}"
+	regex_matches "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 3" "${lines[2]}"
+	regex_matches "[0-9]+\.[0-9]+\\s+released\\s+$sim0 3" "${lines[3]}"
+	num_lines_is 4
+}
+
+@test "gpiowatch: multiple lines" {
+	gpiosim_chip sim0 num_lines=8
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --chip $sim0 1 2 3 4 5
+	dut_regex_match "Watching lines .*"
+
+	request_release_line $sim0 2
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 2"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 2"
+
+	request_release_line $sim0 3
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 3"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 3"
+
+	request_release_line $sim0 4
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 4"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 4"
+
+	assert_fail dut_readable
+}
+
+@test "gpiowatch: multiple lines by name and offset" {
+	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --chip $sim0 bar foo 3
+	dut_regex_match "Watching lines .*"
+
+	request_release_line $sim0 2
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 2\\s+bar"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 2\\s+bar"
+
+	request_release_line $sim0 1
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 1\\s+foo"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 1\\s+foo"
+
+	request_release_line $sim0 3
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 3"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 3"
+
+	assert_fail dut_readable
+}
+
+@test "gpiowatch: multiple lines across multiple chips" {
+	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar
+	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=4:xyz
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+	local sim1=${GPIOSIM_CHIP_NAME[sim1]}
+
+	dut_run gpiowatch --banner baz bar foo xyz
+	dut_regex_match "Watching lines .*"
+
+	request_release_line $sim0 2
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+bar"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+bar"
+
+	request_release_line $sim0 1
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+foo"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+foo"
+
+	request_release_line $sim1 4
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+xyz"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+xyz"
+
+	request_release_line $sim1 0
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+baz"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+baz"
+
+	assert_fail dut_readable
+}
+
+@test "gpiowatch: exit after SIGINT" {
+	gpiosim_chip sim0 num_lines=8
+
+	dut_run gpiowatch --banner --chip ${GPIOSIM_CHIP_NAME[sim0]} 4
+	dut_regex_match "Watching line .*"
+
+	dut_kill -SIGINT
+	dut_wait
+
+	status_is 130
+}
+
+@test "gpiowatch: exit after SIGTERM" {
+	gpiosim_chip sim0 num_lines=8
+
+	dut_run gpiowatch --banner --chip ${GPIOSIM_CHIP_NAME[sim0]} 4
+	dut_regex_match "Watching line .*"
+
+	dut_kill -SIGTERM
+	dut_wait
+
+	status_is 143
+}
+
+@test "gpiowatch: with nonexistent line" {
+	run_tool gpiowatch nonexistent-line
+
+	status_is 1
+	output_regex_match ".*cannot find line 'nonexistent-line'"
+}
+
+@test "gpiowatch: with same line twice" {
+	gpiosim_chip sim0 num_lines=8 line_name=1:foo
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	# by offset
+	run_tool gpiowatch --chip $sim0 0 0
+
+	output_regex_match ".*lines '0' and '0' are the same line"
+	num_lines_is 1
+	status_is 1
+
+	# by name
+	run_tool gpiowatch foo foo
+
+	output_regex_match ".*lines 'foo' and 'foo' are the same line"
+	num_lines_is 1
+	status_is 1
+
+	# by name and offset
+	run_tool gpiowatch --chip $sim0 1 foo
+
+	output_regex_match ".*lines '1' and 'foo' are the same line"
+	num_lines_is 1
+	status_is 1
+}
+
+@test "gpiowatch: with strict named line check" {
+	gpiosim_chip sim0 num_lines=4 line_name=1:foo line_name=2:bar \
+				      line_name=3:foobar
+	gpiosim_chip sim1 num_lines=8 line_name=0:baz line_name=2:foobar \
+				      line_name=4:xyz line_name=7:foobar
+	gpiosim_chip sim2 num_lines=16
+
+	run_tool gpiowatch --strict foobar
+
+	output_regex_match ".*line 'foobar' is not unique"
+	status_is 1
+}
+
+@test "gpiowatch: with lines by offset" {
+	# not suggesting this setup makes any sense
+	# - just test that we can deal with it
+	gpiosim_chip sim0 num_lines=8 line_name=1:6 line_name=6:1
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --chip $sim0 1
+	dut_flush
+
+	request_release_line $sim0 1
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 1"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 1"
+
+	request_release_line $sim0 6
+
+	assert_fail dut_readable
+}
+
+@test "gpiowatch: with lines strictly by name" {
+	# not suggesting this setup makes any sense
+	# - just test that we can deal with it
+	gpiosim_chip sim0 num_lines=8 line_name=1:6 line_name=6:1
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --by-name --chip $sim0 1
+	dut_flush
+
+	request_release_line $sim0 6
+	dut_regex_match "[0-9]+\.[0-9]+\\s+requested\\s+$sim0 6 1"
+	dut_regex_match "[0-9]+\.[0-9]+\\s+released\\s+$sim0 6 1"
+
+	request_release_line $sim0 1
+	assert_fail dut_readable
+}
+
+@test "gpiowatch: with no arguments" {
+	run_tool gpiowatch
+
+	output_regex_match ".*at least one GPIO line must be specified"
+	status_is 1
+}
+
+@test "gpiowatch: with no line specified" {
+	gpiosim_chip sim0 num_lines=8
+
+	run_tool gpiowatch --chip ${GPIOSIM_CHIP_NAME[sim0]}
+
+	output_regex_match ".*at least one GPIO line must be specified"
+	status_is 1
+}
+
+@test "gpiowatch: with offset out of range" {
+	gpiosim_chip sim0 num_lines=4
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	run_tool gpiowatch --chip $sim0 5
+
+	output_regex_match ".*offset 5 is out of range on chip '$sim0'"
+	status_is 1
+}
+
+@test "gpiowatch: with custom format (event type + offset)" {
+	gpiosim_chip sim0 num_lines=8
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --event=requested "--format=%e %o" -c $sim0 4
+	dut_flush
+
+	request_release_line $sim0 4
+	dut_read
+	output_is "1 4"
+}
+
+@test "gpiowatch: with custom format (event type + offset joined)" {
+	gpiosim_chip sim0 num_lines=8
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --event=requested "--format=%e%o" -c $sim0 4
+	dut_flush
+
+	request_release_line $sim0 4
+	dut_read
+	output_is "14"
+}
+
+@test "gpiowatch: with custom format (event, chip and line)" {
+	gpiosim_chip sim0 num_lines=8 line_name=4:baz
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --event=released \
+		"--format=%e %o %E %c %l" -c $sim0 baz
+	dut_flush
+
+	request_release_line $sim0 4
+	dut_regex_match "2 4 released $sim0 baz"
+}
+
+@test "gpiowatch: with custom format (seconds timestamp)" {
+	gpiosim_chip sim0 num_lines=8
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --event=requested "--format=%e %o %S" \
+		-c $sim0 4
+	dut_flush
+
+	request_release_line $sim0 4
+	dut_regex_match "1 4 [0-9]+\\.[0-9]+"
+}
+
+@test "gpiowatch: with custom format (UTC timestamp)" {
+	gpiosim_chip sim0 num_lines=8
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --event=released \
+		"--format=%U %e %o" -c $sim0 4
+	dut_flush
+
+	request_release_line $sim0 4
+	dut_regex_match \
+"[0-9][0-9][0-9][0-9]-[0-1][0-9]-[0-3][0-9]T[0-2][0-9]:[0-5][0-9]:[0-5][0-9]\\.[0-9]+Z 2 4"
+}
+
+@test "gpiowatch: with custom format (localtime timestamp)" {
+	gpiosim_chip sim0 num_lines=8
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --event=released \
+		"--format=%L %e %o" -c $sim0 4
+	dut_flush
+
+	request_release_line $sim0 4
+	dut_regex_match \
+"[0-9][0-9][0-9][0-9]-[0-1][0-9]-[0-3][0-9]T[0-2][0-9]:[0-5][0-9]:[0-5][0-9]\\.[0-9]+ 2 4"
+}
+
+@test "gpiowatch: with custom format (double percent sign)" {
+	gpiosim_chip sim0 num_lines=8
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --event=requested "--format=start%%end" \
+		-c $sim0 4
+	dut_flush
+
+	request_release_line $sim0 4
+	dut_read
+	output_is "start%end"
+}
+
+@test "gpiowatch: with custom format (double percent sign + event type specifier)" {
+	gpiosim_chip sim0 num_lines=8
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --event=requested "--format=%%e" -c $sim0 4
+	dut_flush
+
+	request_release_line $sim0 4
+	dut_read
+	output_is "%e"
+}
+
+@test "gpiowatch: with custom format (single percent sign)" {
+	gpiosim_chip sim0 num_lines=8
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --event=requested "--format=%" -c $sim0 4
+	dut_flush
+
+	request_release_line $sim0 4
+	dut_read
+	output_is "%"
+}
+
+@test "gpiowatch: with custom format (single percent sign between other characters)" {
+	gpiosim_chip sim0 num_lines=8
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --event=requested "--format=foo % bar" -c $sim0 4
+	dut_flush
+
+	request_release_line $sim0 4
+	dut_read
+	output_is "foo % bar"
+}
+
+@test "gpiowatch: with custom format (unknown specifier)" {
+	gpiosim_chip sim0 num_lines=8
+
+	local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+	dut_run gpiowatch --banner --event=requested "--format=%x" -c $sim0 4
+	dut_flush
+
+	request_release_line $sim0 4
+	dut_read
+	output_is "%x"
+}
-- 
2.38.0