From: Denys Dmytriyenko <denis@denix.org>
To: Andrew Davis <afd@ti.com>
Cc: Denys Dmytriyenko <denys@konsulko.com>,
Ryan Eatmon <reatmon@ti.com>,
meta-arago@lists.yoctoproject.org
Subject: Re: [meta-arago][master/kirkstone][PATCH 7/7] meta-arago: Use new J7 SoC names over specific board names
Date: Mon, 10 Oct 2022 21:35:33 -0400 [thread overview]
Message-ID: <20221011013533.GE30861@denix.org> (raw)
In-Reply-To: <e6d2ae4c-9684-98b1-c8a6-ad28ecc4f49d@ti.com>
On Mon, Oct 10, 2022 at 08:26:26AM -0500, Andrew Davis wrote:
> On 10/7/22 3:10 PM, Denys Dmytriyenko wrote:
> >On Thu, Oct 06, 2022 at 10:06:28AM -0500, Andrew Davis via lists.yoctoproject.org wrote:
> >>Now that we have SoC names, we can avoid adding features based on the
> >>board name. We expect folks to create their own boards based on these
> >>SoCs, and so using the TI made EVM board name everywhere adds extra churn
> >>when adding a new board. Plus it is more correct for most of these
> >>features as they depend on the SoC, not on the EVM board.
> >>
> >>One other thing we do here is to not use the generic "j7" name,
> >>the current and future J7 devices are far to feature diverse
> >>to group at this level. Grouping like that will lead to the wrong
> >>things getting enabled as new J7 SoCs are added.
> >
> >Hmm, this second part is rather backwards (IMO) in some places, see below.
> >
> >
> >>diff --git a/meta-arago-distro/recipes-core/images/tisdk-core-bundle.inc b/meta-arago-distro/recipes-core/images/tisdk-core-bundle.inc
> >>index 3c31ba18..296eef7a 100644
> >>--- a/meta-arago-distro/recipes-core/images/tisdk-core-bundle.inc
> >>+++ b/meta-arago-distro/recipes-core/images/tisdk-core-bundle.inc
> >>@@ -24,7 +24,9 @@ DTB_FILTER:am57xx-hs-evm = "${DTB_FILTER:am57xx-evm}"
> >> DTB_FILTER:ti43x = "am43"
> >> DTB_FILTER:omapl138 = "da850"
> >> DTB_FILTER:am65xx = "am65"
> >>-DTB_FILTER:j7 = "j721e"
> >>+DTB_FILTER:j721e = "j721e"
> >>+DTB_FILTER:j7200 = "j7200"
> >>+DTB_FILTER:j721s2 = "j721s2"
> >
> >Yes, here it does make perfect sense.
> >
> >
> >>diff --git a/meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-addons.bb b/meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-addons.bb
> >>index f4e72a89..c01e9497 100644
> >>--- a/meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-addons.bb
> >>+++ b/meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-addons.bb
> >>@@ -61,9 +61,9 @@ UTILS:append:am64xx = " ti-rtos-firmware pru-icss"
> >> UTILS:append:am62xx = " ti-rtos-firmware"
> >> #UTILS:append:am65xx = " ti-rtos-firmware pru-icss pru-pwm-fw"
> >> UTILS:append:am65xx = " ti-rtos-firmware pru-icss"
> >>-UTILS:append:j7 = " ti-rtos-firmware"
> >>-UTILS:append:j721e-evm = " pru-icss"
> >>-UTILS:append:j721e-hs-evm = " pru-icss"
> >>+UTILS:append:j721e = " ti-rtos-firmware pru-icss"
> >>+UTILS:append:j7200 = " ti-rtos-firmware"
> >>+UTILS:append:j721s2 = " ti-rtos-firmware"
> >
> >Here - not so much. ti-rtos-firmware is applicable to all j7. So, I'd leave
> >that line alone and only replace adding pru-icss to specific EVMs to adding it
> >to j721e SoC family.
> >
> >Or go even further - ti-rtos-firmware is common to all k3 platforms, so all
> >the individual am65xx, am64xx and am62xx, along with j7, could be replaced
> >with one line:
> >
> >UTILS:append:k3 = " ti-rtos-firmware"
> >
> >And then add pri-icss or other extra FW to specific SoC families only.
> >
>
> If you want I can make this re-arrangement in a follow up patch.
>
> >
> >>diff --git a/meta-arago-distro/recipes-core/packagegroups/ti-analytics.bb b/meta-arago-distro/recipes-core/packagegroups/ti-analytics.bb
> >>index e16e4d51..e6e0b915 100644
> >>--- a/meta-arago-distro/recipes-core/packagegroups/ti-analytics.bb
> >>+++ b/meta-arago-distro/recipes-core/packagegroups/ti-analytics.bb
> >>@@ -19,7 +19,9 @@ ANALYTICS = ""
> >> # ${@['','qt-opencv-opencl-opengl-multithreaded'][oe.utils.all_distro_features(d, 'opencv opencl opengl', True, False) and bb.utils.contains('MACHINE_FEATURES', 'gpu dsp', True, False, d)]} \
> >> # ${@['','barcode-roi'][oe.utils.all_distro_features(d, 'opencv', True, False) and bb.utils.contains('MACHINE_FEATURES', 'dsp', True, False, d)]} \
> >> #"
> >>-ANALYTICS:j7 = ""
> >>+ANALYTICS:j721e = ""
> >>+ANALYTICS:j7200 = ""
> >>+ANALYTICS:j721s2 = ""
> >
> >Well, this is probably completely wrong by now, anyway.
> >
>
> Yes it probably is, but then my point in this patch was to
> not make any changes to functionality (or as few as possible).
> So if it is broken now, it was broken just the same before.
>
> >
> >> ANALYTICS:omapl138 = ""
> >> RDEPENDS:${PN} = "\
> >>diff --git a/meta-arago-distro/recipes-core/packagegroups/ti-test.bb b/meta-arago-distro/recipes-core/packagegroups/ti-test.bb
> >>index 99a6cc82..5f56f8be 100644
> >>--- a/meta-arago-distro/recipes-core/packagegroups/ti-test.bb
> >>+++ b/meta-arago-distro/recipes-core/packagegroups/ti-test.bb
> >>@@ -78,7 +78,15 @@ ARAGO_TI_TEST:append:k3 = " \
> >> k3conf \
> >> "
> >>-ARAGO_TI_TEST:append:j7 = " \
> >>+ARAGO_TI_TEST:append:j721e = " \
> >>+ ufs-utils \
> >>+"
> >>+
> >>+ARAGO_TI_TEST:append:j7200 = " \
> >>+ ufs-utils \
> >>+"
> >>+
> >>+ARAGO_TI_TEST:append:j721s2 = " \
> >> ufs-utils \
> >> "
> >
> >ufs-utils is quite generic and should probably be added to k3 or maybe even
> >all platforms...
> >
>
> Same as above, would you like this done in a follow up patch? This patch only
> fans out the name keeping the same functionality as before. If that exposes
> existing issues or opportunities for cleanup, then I can make those next.
It would have been fine to do further cleanup/optimization/collapsing of the
code in a followup patch, if you weren't first expanding it here...
In other words, it seems replacing "j7" override with more specific
"j721e/j7200/j721s2" overrides only makes sense for DTB_FILTER case and
should be left alone in other 3 places.
--
Denys
next prev parent reply other threads:[~2022-10-11 1:35 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-06 15:06 [meta-arago][master/kirkstone][PATCH 1/7] ti-crypto-examples: Remove ti-crypto-examples Andrew Davis
2022-10-06 15:06 ` [meta-arago][master/kirkstone][PATCH 2/7] big-data-ipc-demo: Merge include file and rename Andrew Davis
2022-10-06 15:06 ` [meta-arago][master/kirkstone][PATCH 3/7] cmem: Remove Makefile_cmem-mod and cmem refrences Andrew Davis
2022-10-06 15:06 ` [meta-arago][master/kirkstone][PATCH 4/7] meta-arago: Remove remaining bits of ti-ocf-crypto-module Andrew Davis
2022-10-06 15:06 ` [meta-arago][master/kirkstone][PATCH 5/7] ti-pru-sw: Remove old TI-PRU-SW examples and helpers Andrew Davis
2022-10-06 15:06 ` [meta-arago][master/kirkstone][PATCH 6/7] ti-tisdk: Remove uio-module-drv kernel module Andrew Davis
2022-10-06 15:06 ` [meta-arago][master/kirkstone][PATCH 7/7] meta-arago: Use new J7 SoC names over specific board names Andrew Davis
2022-10-07 20:10 ` Denys Dmytriyenko
2022-10-10 13:26 ` Andrew Davis
2022-10-11 1:35 ` Denys Dmytriyenko [this message]
2022-10-11 17:34 ` Andrew Davis
2025-08-13 23:25 ` [meta-arago][master/kirkstone][PATCH 1/7] ti-crypto-examples: Remove PRC Automation
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221011013533.GE30861@denix.org \
--to=denis@denix.org \
--cc=afd@ti.com \
--cc=denys@konsulko.com \
--cc=meta-arago@lists.yoctoproject.org \
--cc=reatmon@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.