From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To: Dave Jiang <dave.jiang@intel.com>
Cc: <linux-cxl@vger.kernel.org>, <dan.j.williams@intel.com>,
<ira.weiny@intel.com>, <vishal.l.verma@intel.com>,
<alison.schofield@intel.com>
Subject: Re: [PATCH v2] cxl: update names for interleave granularity conversion macros
Date: Thu, 13 Oct 2022 13:21:35 +0100 [thread overview]
Message-ID: <20221013132135.000054cd@huawei.com> (raw)
In-Reply-To: <166559536239.2130185.18009064249679668239.stgit@djiang5-desk3.ch.intel.com>
On Wed, 12 Oct 2022 10:23:23 -0700
Dave Jiang <dave.jiang@intel.com> wrote:
> Change names for granularity macros to clearly indicate which
> variable is encoded and which is the actual granularity.
>
> granularity == interleave granularity
> enig == encoded interleave granularity
I'm not that bothered, but just wanted to note we have uses
of eig for this already. Maybe better to pick either enig or
eig throughout ?
Either way it's an improvement ;)
>
> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
>
> v2:
> - change ig to granularity for better clarificiation (Alison)
>
> drivers/cxl/acpi.c | 2 +-
> drivers/cxl/core/hdm.c | 6 +++---
> drivers/cxl/core/region.c | 6 +++---
> drivers/cxl/cxl.h | 12 ++++++------
> 4 files changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
> index fb649683dd3a..5664411c3198 100644
> --- a/drivers/cxl/acpi.c
> +++ b/drivers/cxl/acpi.c
> @@ -105,7 +105,7 @@ static int cxl_parse_cfmws(union acpi_subtable_headers *header, void *arg,
> rc = cxl_to_ways(cfmws->interleave_ways, &ways);
> if (rc)
> return rc;
> - rc = cxl_to_granularity(cfmws->granularity, &ig);
> + rc = enig_to_granularity(cfmws->granularity, &ig);
> if (rc)
> return rc;
> for (i = 0; i < ways; i++)
> diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
> index d1d2caea5c62..626cb7d66194 100644
> --- a/drivers/cxl/core/hdm.c
> +++ b/drivers/cxl/core/hdm.c
> @@ -492,7 +492,7 @@ static void cxld_set_interleave(struct cxl_decoder *cxld, u32 *ctrl)
> if (WARN_ONCE(ways_to_cxl(cxld->interleave_ways, &eiw),
> "invalid interleave_ways: %d\n", cxld->interleave_ways))
> return;
> - if (WARN_ONCE(granularity_to_cxl(cxld->interleave_granularity, &eig),
> + if (WARN_ONCE(granularity_to_enig(cxld->interleave_granularity, &eig),
> "invalid interleave_granularity: %d\n",
> cxld->interleave_granularity))
> return;
> @@ -744,8 +744,8 @@ static int init_hdm_decoder(struct cxl_port *port, struct cxl_decoder *cxld,
> port->id, cxld->id, ctrl);
> return rc;
> }
> - rc = cxl_to_granularity(FIELD_GET(CXL_HDM_DECODER0_CTRL_IG_MASK, ctrl),
> - &cxld->interleave_granularity);
> + rc = enig_to_granularity(FIELD_GET(CXL_HDM_DECODER0_CTRL_IG_MASK, ctrl),
> + &cxld->interleave_granularity);
> if (rc)
> return rc;
>
> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> index 401148016978..34590f961740 100644
> --- a/drivers/cxl/core/region.c
> +++ b/drivers/cxl/core/region.c
> @@ -390,7 +390,7 @@ static ssize_t interleave_granularity_store(struct device *dev,
> if (rc)
> return rc;
>
> - rc = granularity_to_cxl(val, &ig);
> + rc = granularity_to_enig(val, &ig);
> if (rc)
> return rc;
>
> @@ -1002,7 +1002,7 @@ static int cxl_port_setup_targets(struct cxl_port *port,
> parent_iw = parent_cxld->interleave_ways;
> }
>
> - rc = granularity_to_cxl(parent_ig, &peig);
> + rc = granularity_to_enig(parent_ig, &peig);
> if (rc) {
> dev_dbg(&cxlr->dev, "%s:%s: invalid parent granularity: %d\n",
> dev_name(parent_port->uport),
> @@ -1039,7 +1039,7 @@ static int cxl_port_setup_targets(struct cxl_port *port,
> eig = peig;
> }
>
> - rc = cxl_to_granularity(eig, &ig);
> + rc = enig_to_granularity(eig, &ig);
> if (rc) {
> dev_dbg(&cxlr->dev, "%s:%s: invalid interleave: %d\n",
> dev_name(port->uport), dev_name(&port->dev),
> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> index f680450f0b16..ef6cc63c06ef 100644
> --- a/drivers/cxl/cxl.h
> +++ b/drivers/cxl/cxl.h
> @@ -69,11 +69,11 @@ static inline int cxl_hdm_decoder_count(u32 cap_hdr)
> }
>
> /* Encode defined in CXL 2.0 8.2.5.12.7 HDM Decoder Control Register */
> -static inline int cxl_to_granularity(u16 ig, unsigned int *val)
> +static inline int enig_to_granularity(u16 enig, unsigned int *granularity)
> {
> - if (ig > 6)
> + if (enig > 6)
> return -EINVAL;
> - *val = 256 << ig;
> + *granularity = 256 << enig;
> return 0;
> }
>
> @@ -94,11 +94,11 @@ static inline int cxl_to_ways(u8 eniw, unsigned int *val)
> return 0;
> }
>
> -static inline int granularity_to_cxl(int g, u16 *ig)
> +static inline int granularity_to_enig(int granularity, u16 *enig)
> {
> - if (g > SZ_16K || g < 256 || !is_power_of_2(g))
> + if (granularity > SZ_16K || granularity < 256 || !is_power_of_2(granularity))
> return -EINVAL;
> - *ig = ilog2(g) - 8;
> + *enig = ilog2(granularity) - 8;
> return 0;
> }
>
>
>
next prev parent reply other threads:[~2022-10-13 12:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-12 17:23 [PATCH v2] cxl: update names for interleave granularity conversion macros Dave Jiang
2022-10-13 12:21 ` Jonathan Cameron [this message]
2022-10-22 21:49 ` Dan Williams
2022-10-24 15:49 ` Dave Jiang
-- strict thread matches above, loose matches on Subject: below --
2022-10-24 16:54 Dave Jiang
2022-10-24 21:41 ` Dave Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221013132135.000054cd@huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.