From: Peter Chen <peter.chen@kernel.org>
To: Xu Yang <xu.yang_2@nxp.com>
Cc: jun.li@nxp.com, gregkh@linuxfoundation.org,
linux-usb@vger.kernel.org, linux-imx@nxp.com
Subject: Re: [PATCH v2 1/8] usb: chipidea: core: add controller resume support when controller is powered off
Date: Mon, 17 Oct 2022 08:56:46 +0800 [thread overview]
Message-ID: <20221017005646.GD12701@nchen-desktop> (raw)
In-Reply-To: <20221013151442.3262951-2-xu.yang_2@nxp.com>
On 22-10-13 23:14:35, Xu Yang wrote:
> For some SoCs, the controler's power will be off during the system
> suspend, and it needs some recovery operation to let the system back
> to workable. We add this support in this patch.
>
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Peter
>
> ---
> Changes since v1:
> - add static modifer for ci_handle_power_lost().
> ---
> drivers/usb/chipidea/core.c | 80 ++++++++++++++++++++++++++++---------
> drivers/usb/chipidea/otg.c | 2 +-
> drivers/usb/chipidea/otg.h | 1 +
> 3 files changed, 63 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index ae90fee75a32..80267b973c26 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -637,6 +637,49 @@ static int ci_usb_role_switch_set(struct usb_role_switch *sw,
> return 0;
> }
>
> +static enum ci_role ci_get_role(struct ci_hdrc *ci)
> +{
> + enum ci_role role;
> +
> + if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
> + if (ci->is_otg) {
> + role = ci_otg_role(ci);
> + hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE);
> + } else {
> + /*
> + * If the controller is not OTG capable, but support
> + * role switch, the defalt role is gadget, and the
> + * user can switch it through debugfs.
> + */
> + role = CI_ROLE_GADGET;
> + }
> + } else {
> + role = ci->roles[CI_ROLE_HOST] ? CI_ROLE_HOST
> + : CI_ROLE_GADGET;
> + }
> +
> + return role;
> +}
> +
> +static void ci_handle_power_lost(struct ci_hdrc *ci)
> +{
> + enum ci_role role;
> +
> + disable_irq_nosync(ci->irq);
> + if (!ci_otg_is_fsm_mode(ci)) {
> + role = ci_get_role(ci);
> +
> + if (ci->role != role) {
> + ci_handle_id_switch(ci);
> + } else if (role == CI_ROLE_GADGET) {
> + if (ci->is_otg && hw_read_otgsc(ci, OTGSC_BSV))
> + usb_gadget_vbus_connect(&ci->gadget);
> + }
> + }
> +
> + enable_irq(ci->irq);
> +}
> +
> static struct usb_role_switch_desc ci_role_switch = {
> .set = ci_usb_role_switch_set,
> .get = ci_usb_role_switch_get,
> @@ -1134,25 +1177,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
> }
> }
>
> - if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
> - if (ci->is_otg) {
> - ci->role = ci_otg_role(ci);
> - /* Enable ID change irq */
> - hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE);
> - } else {
> - /*
> - * If the controller is not OTG capable, but support
> - * role switch, the defalt role is gadget, and the
> - * user can switch it through debugfs.
> - */
> - ci->role = CI_ROLE_GADGET;
> - }
> - } else {
> - ci->role = ci->roles[CI_ROLE_HOST]
> - ? CI_ROLE_HOST
> - : CI_ROLE_GADGET;
> - }
> -
> + ci->role = ci_get_role(ci);
> if (!ci_otg_is_fsm_mode(ci)) {
> /* only update vbus status for peripheral */
> if (ci->role == CI_ROLE_GADGET) {
> @@ -1374,8 +1399,16 @@ static int ci_suspend(struct device *dev)
> static int ci_resume(struct device *dev)
> {
> struct ci_hdrc *ci = dev_get_drvdata(dev);
> + bool power_lost;
> int ret;
>
> + /* Since ASYNCLISTADDR (host mode) and ENDPTLISTADDR (device
> + * mode) share the same register address. We can check if
> + * controller resume from power lost based on this address
> + * due to this register will be reset after power lost.
> + */
> + power_lost = !hw_read(ci, OP_ENDPTLISTADDR, ~0);
> +
> if (device_may_wakeup(dev))
> disable_irq_wake(ci->irq);
>
> @@ -1383,6 +1416,15 @@ static int ci_resume(struct device *dev)
> if (ret)
> return ret;
>
> + if (power_lost) {
> + /* shutdown and re-init for phy */
> + ci_usb_phy_exit(ci);
> + ci_usb_phy_init(ci);
> + }
> +
> + if (power_lost)
> + ci_handle_power_lost(ci);
> +
> if (ci->supports_runtime_pm) {
> pm_runtime_disable(dev);
> pm_runtime_set_active(dev);
> diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
> index 7b53274ef966..622c3b68aa1e 100644
> --- a/drivers/usb/chipidea/otg.c
> +++ b/drivers/usb/chipidea/otg.c
> @@ -165,7 +165,7 @@ static int hw_wait_vbus_lower_bsv(struct ci_hdrc *ci)
> return 0;
> }
>
> -static void ci_handle_id_switch(struct ci_hdrc *ci)
> +void ci_handle_id_switch(struct ci_hdrc *ci)
> {
> enum ci_role role = ci_otg_role(ci);
>
> diff --git a/drivers/usb/chipidea/otg.h b/drivers/usb/chipidea/otg.h
> index 5e7a6e571dd2..87629b81e03e 100644
> --- a/drivers/usb/chipidea/otg.h
> +++ b/drivers/usb/chipidea/otg.h
> @@ -14,6 +14,7 @@ int ci_hdrc_otg_init(struct ci_hdrc *ci);
> void ci_hdrc_otg_destroy(struct ci_hdrc *ci);
> enum ci_role ci_otg_role(struct ci_hdrc *ci);
> void ci_handle_vbus_change(struct ci_hdrc *ci);
> +void ci_handle_id_switch(struct ci_hdrc *ci);
> static inline void ci_otg_queue_work(struct ci_hdrc *ci)
> {
> disable_irq_nosync(ci->irq);
> --
> 2.34.1
>
--
Thanks,
Peter Chen
next prev parent reply other threads:[~2022-10-17 0:56 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-13 15:14 [PATCH v2 0/8] add power lost support during system suspend/resume Xu Yang
2022-10-13 15:14 ` [PATCH v2 1/8] usb: chipidea: core: add controller resume support when controller is powered off Xu Yang
2022-10-17 0:56 ` Peter Chen [this message]
2022-10-25 13:47 ` Conor Dooley
2022-10-26 2:50 ` [EXT] " Xu Yang
2022-10-13 15:14 ` [PATCH v2 2/8] usb: chipidea: core: handle suspend/resume for each role Xu Yang
2022-10-17 0:57 ` Peter Chen
2022-10-13 15:14 ` [PATCH v2 3/8] usb: chipidea: host: add suspend/resume support for host controller Xu Yang
2022-10-17 1:06 ` Peter Chen
2022-10-13 15:14 ` [PATCH v2 4/8] usb: chipidea: udc: add suspend/resume support for device controller Xu Yang
2022-10-17 1:07 ` Peter Chen
2022-10-13 15:14 ` [PATCH v2 5/8] usb: chipidea: usbmisc: group usbmisc operations for PM Xu Yang
2022-10-13 15:14 ` [PATCH v2 6/8] usb: chipidea: usbmisc: add power lost check for imx6sx Xu Yang
2022-10-13 15:14 ` [PATCH v2 7/8] usb: chipidea: usbmisc: add power lost check for imx7d Xu Yang
2022-10-13 15:14 ` [PATCH v2 8/8] usb: chipidea: usbmisc: add power lost check for imx7ulp Xu Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221017005646.GD12701@nchen-desktop \
--to=peter.chen@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jun.li@nxp.com \
--cc=linux-imx@nxp.com \
--cc=linux-usb@vger.kernel.org \
--cc=xu.yang_2@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.