From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org, ngupta@vflare.org,
minchan@kernel.org, senozhatsky@chromium.org,
akpm@linux-foundation.org
Subject: + zram-add-recompression-algorithm-sysfs-knob.patch added to mm-unstable branch
Date: Tue, 18 Oct 2022 16:20:42 -0700 [thread overview]
Message-ID: <20221018232043.3CB6DC433D6@smtp.kernel.org> (raw)
The patch titled
Subject: zram: add recompression algorithm sysfs knob
has been added to the -mm mm-unstable branch. Its filename is
zram-add-recompression-algorithm-sysfs-knob.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/zram-add-recompression-algorithm-sysfs-knob.patch
This patch will later appear in the mm-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: Sergey Senozhatsky <senozhatsky@chromium.org>
Subject: zram: add recompression algorithm sysfs knob
Date: Tue, 18 Oct 2022 13:55:26 +0900
Introduce recomp_algorithm sysfs knob that controls secondary algorithm
selection used for recompression. This device attribute works in a
similar way with comp_algorithm attribute.
Link: https://lkml.kernel.org/r/20221018045533.2396670-3-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/block/zram/zram_drv.c | 111 +++++++++++++++++++++++++-------
1 file changed, 90 insertions(+), 21 deletions(-)
--- a/drivers/block/zram/zram_drv.c~zram-add-recompression-algorithm-sysfs-knob
+++ a/drivers/block/zram/zram_drv.c
@@ -41,7 +41,12 @@ static DEFINE_IDR(zram_index_idr);
static DEFINE_MUTEX(zram_index_mutex);
static int zram_major;
-static const char *default_compressor = CONFIG_ZRAM_DEF_COMP;
+static const char *default_comp_algs[ZRAM_MAX_ZCOMPS] = {
+ CONFIG_ZRAM_DEF_COMP,
+#ifdef CONFIG_ZRAM_MULTI_COMP
+ "zstd",
+#endif
+};
/* Module params (documentation at end) */
static unsigned int num_devices = 1;
@@ -997,31 +1002,37 @@ static ssize_t max_comp_streams_store(st
return len;
}
-static ssize_t comp_algorithm_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static void comp_algorithm_set(struct zram *zram, u32 idx, const char *alg)
{
- size_t sz;
- struct zram *zram = dev_to_zram(dev);
+ bool default_alg = false;
+ int i;
- down_read(&zram->init_lock);
- sz = zcomp_available_show(zram->comp_algs[ZRAM_PRIMARY_ZCOMP], buf);
- up_read(&zram->init_lock);
+ /* Do not kfree() algs that we didn't allocate, IOW the default ones */
+ for (i = 0; i < ZRAM_MAX_ZCOMPS; i++) {
+ if (zram->comp_algs[idx] == default_comp_algs[i]) {
+ default_alg = true;
+ break;
+ }
+ }
- return sz;
+ if (!default_alg)
+ kfree(zram->comp_algs[idx]);
+ zram->comp_algs[idx] = alg;
}
-static void comp_algorithm_set(struct zram *zram, u32 idx, const char *alg)
+static ssize_t __comp_algorithm_show(struct zram *zram, u32 idx, char *buf)
{
- /* Do not kfree() algs that we didn't allocate, IOW the default ones */
- if (zram->comp_algs[idx] != default_compressor)
- kfree(zram->comp_algs[idx]);
- zram->comp_algs[idx] = alg;
+ ssize_t sz;
+
+ down_read(&zram->init_lock);
+ sz = zcomp_available_show(zram->comp_algs[idx], buf);
+ up_read(&zram->init_lock);
+
+ return sz;
}
-static ssize_t comp_algorithm_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t len)
+static int __comp_algorithm_store(struct zram *zram, u32 idx, const char *buf)
{
- struct zram *zram = dev_to_zram(dev);
char *compressor;
size_t sz;
@@ -1050,11 +1061,55 @@ static ssize_t comp_algorithm_store(stru
return -EBUSY;
}
- comp_algorithm_set(zram, ZRAM_PRIMARY_ZCOMP, compressor);
+ comp_algorithm_set(zram, idx, compressor);
up_write(&zram->init_lock);
- return len;
+ return 0;
+}
+
+static ssize_t comp_algorithm_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct zram *zram = dev_to_zram(dev);
+
+ return __comp_algorithm_show(zram, ZRAM_PRIMARY_ZCOMP, buf);
+}
+
+static ssize_t comp_algorithm_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ struct zram *zram = dev_to_zram(dev);
+ int ret;
+
+ ret = __comp_algorithm_store(zram, ZRAM_PRIMARY_ZCOMP, buf);
+ return ret ? ret : len;
}
+#ifdef CONFIG_ZRAM_MULTI_COMP
+static ssize_t recomp_algorithm_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct zram *zram = dev_to_zram(dev);
+
+ return __comp_algorithm_show(zram, ZRAM_SECONDARY_ZCOMP, buf);
+}
+
+static ssize_t recomp_algorithm_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ struct zram *zram = dev_to_zram(dev);
+ int ret;
+
+ ret = __comp_algorithm_store(zram, ZRAM_SECONDARY_ZCOMP, buf);
+ return ret ? ret : len;
+}
+#endif
+
static ssize_t compact_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t len)
{
@@ -1759,7 +1814,11 @@ static void zram_reset_device(struct zra
memset(&zram->stats, 0, sizeof(zram->stats));
reset_bdev(zram);
- comp_algorithm_set(zram, ZRAM_PRIMARY_ZCOMP, default_compressor);
+ comp_algorithm_set(zram, ZRAM_PRIMARY_ZCOMP,
+ default_comp_algs[ZRAM_PRIMARY_ZCOMP]);
+ if (IS_ENABLED(CONFIG_ZRAM_MULTI_COMP))
+ comp_algorithm_set(zram, ZRAM_SECONDARY_ZCOMP,
+ default_comp_algs[ZRAM_SECONDARY_ZCOMP]);
up_write(&zram->init_lock);
}
@@ -1892,6 +1951,9 @@ static DEVICE_ATTR_WO(writeback);
static DEVICE_ATTR_RW(writeback_limit);
static DEVICE_ATTR_RW(writeback_limit_enable);
#endif
+#ifdef CONFIG_ZRAM_MULTI_COMP
+static DEVICE_ATTR_RW(recomp_algorithm);
+#endif
static struct attribute *zram_disk_attrs[] = {
&dev_attr_disksize.attr,
@@ -1915,6 +1977,9 @@ static struct attribute *zram_disk_attrs
&dev_attr_bd_stat.attr,
#endif
&dev_attr_debug_stat.attr,
+#ifdef CONFIG_ZRAM_MULTI_COMP
+ &dev_attr_recomp_algorithm.attr,
+#endif
NULL,
};
@@ -1994,7 +2059,11 @@ static int zram_add(void)
if (ret)
goto out_cleanup_disk;
- zram->comp_algs[ZRAM_PRIMARY_ZCOMP] = default_compressor;
+ zram->comp_algs[ZRAM_PRIMARY_ZCOMP] =
+ default_comp_algs[ZRAM_PRIMARY_ZCOMP];
+ if (IS_ENABLED(CONFIG_ZRAM_MULTI_COMP))
+ zram->comp_algs[ZRAM_SECONDARY_ZCOMP] =
+ default_comp_algs[ZRAM_SECONDARY_ZCOMP];
zram_debugfs_register(zram);
pr_info("Added device: %s\n", zram->disk->disk_name);
_
Patches currently in -mm which might be from senozhatsky@chromium.org are
zram-preparation-for-multi-zcomp-support.patch
zram-add-recompression-algorithm-sysfs-knob.patch
zram-factor-out-wb-and-non-wb-zram-read-functions.patch
zram-introduce-recompress-sysfs-knob.patch
documentation-add-recompression-documentation.patch
zram-add-recompression-algorithm-choice-to-kconfig.patch
zram-add-recompress-flag-to-read_block_state.patch
zram-clarify-writeback_store-comment.patch
zram-use-is_err_value-to-check-for-zs_malloc-errors.patch
next reply other threads:[~2022-10-18 23:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-18 23:20 Andrew Morton [this message]
-- strict thread matches above, loose matches on Subject: below --
2022-11-10 0:30 + zram-add-recompression-algorithm-sysfs-knob.patch added to mm-unstable branch Andrew Morton
2022-10-18 0:09 Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221018232043.3CB6DC433D6@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=minchan@kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=ngupta@vflare.org \
--cc=senozhatsky@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.