From: Simon Glass <sjg@chromium.org>
To: U-Boot Mailing List <u-boot@lists.denx.de>
Cc: Anatolij Gustschin <agust@denx.de>,
Simon Glass <sjg@chromium.org>,
Eugen Hristev <eugen.hristev@microchip.com>,
Patrick Delaunay <patrick.delaunay@foss.st.com>,
Stefan Roese <sr@denx.de>, Stelian Pop <stelian@popies.net>
Subject: [PATCH 20/39] video: Drop atmel LCD code
Date: Wed, 19 Oct 2022 05:23:37 -0600 [thread overview]
Message-ID: <20221019112356.1042065-21-sjg@chromium.org> (raw)
In-Reply-To: <20221019112356.1042065-1-sjg@chromium.org>
This has not been migrated to DM_VIDEO since 2019. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
.../mach-at91/arm926ejs/at91sam9n12_devices.c | 39 ----------
arch/arm/mach-at91/armv7/sama5d3_devices.c | 33 --------
board/atmel/at91sam9261ek/at91sam9261ek.c | 67 -----------------
board/atmel/at91sam9263ek/at91sam9263ek.c | 63 ----------------
.../atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 75 -------------------
board/atmel/at91sam9n12ek/at91sam9n12ek.c | 34 ---------
board/atmel/at91sam9rlek/at91sam9rlek.c | 60 ---------------
board/bluewater/gurnard/gurnard.c | 1 -
drivers/video/atmel_hlcdfb.c | 1 -
drivers/video/atmel_lcdfb.c | 1 -
include/configs/sama5d3xek.h | 3 -
scripts/config_whitelist.txt | 1 -
12 files changed, 378 deletions(-)
diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c
index 736c799e2ad..9f98ce7a45c 100644
--- a/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c
+++ b/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c
@@ -99,42 +99,3 @@ void at91_mci_hw_init(void)
at91_periph_clk_enable(ATMEL_ID_HSMCI0);
}
-
-#ifdef CONFIG_LCD
-void at91_lcd_hw_init(void)
-{
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDPWR */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDVSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDHSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDDOTCK */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDDOTCK */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
-
- at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-#endif
diff --git a/arch/arm/mach-at91/armv7/sama5d3_devices.c b/arch/arm/mach-at91/armv7/sama5d3_devices.c
index 091059ea565..04b700a94d7 100644
--- a/arch/arm/mach-at91/armv7/sama5d3_devices.c
+++ b/arch/arm/mach-at91/armv7/sama5d3_devices.c
@@ -170,39 +170,6 @@ void at91_gmac_hw_init(void)
}
#endif
-#ifdef CONFIG_LCD
-void at91_lcd_hw_init(void)
-{
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
-
- /* The lower 16-bit of LCD only available on Port A */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD8 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD9 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-#endif
-
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
void at91_udp_hw_init(void)
{
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index e5fdf383996..0c53325ba71 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -18,7 +18,6 @@
#include <asm/arch/at91_rstc.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
-#include <lcd.h>
#include <atmel_lcdc.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000)
#include <net.h>
@@ -133,69 +132,6 @@ static void at91sam9261ek_dm9000_hw_init(void)
}
#endif
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 240,
- .vl_row = 320,
- .vl_clk = 4965000,
- .vl_sync = ATMEL_LCDC_INVLINE_INVERTED |
- ATMEL_LCDC_INVFRAME_INVERTED,
- .vl_bpix = 3,
- .vl_tft = 1,
- .vl_hsync_len = 5,
- .vl_left_margin = 1,
- .vl_right_margin = 33,
- .vl_vsync_len = 1,
- .vl_upper_margin = 1,
- .vl_lower_margin = 0,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
- at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
-}
-
-void lcd_disable(void)
-{
- at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
-}
-
-static void at91sam9261ek_lcd_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
- at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */
- at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */
- at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */
- at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */
- at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
- at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
- at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
-
- at91_system_clk_enable(AT91_PMC_HCK1);
-
- /* For 9G10EK, let U-Boot allocate the framebuffer in SDRAM */
-#ifdef CONFIG_AT91SAM9261EK
- gd->fb_base = ATMEL_BASE_SRAM;
-#endif
-}
-
-#endif
-
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
@@ -227,9 +163,6 @@ int board_init(void)
#endif
#ifdef CONFIG_DRIVER_DM9000
at91sam9261ek_dm9000_hw_init();
-#endif
-#ifdef CONFIG_LCD
- at91sam9261ek_lcd_hw_init();
#endif
return 0;
}
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index 7c15a76587d..3e232aa87fb 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -21,7 +21,6 @@
#include <asm/io.h>
#include <asm/arch/gpio.h>
#include <asm/arch/hardware.h>
-#include <lcd.h>
#include <atmel_lcdc.h>
#include <asm/mach-types.h>
@@ -77,65 +76,6 @@ static void at91sam9263ek_nand_hw_init(void)
}
#endif
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 240,
- .vl_row = 320,
- .vl_clk = 4965000,
- .vl_sync = ATMEL_LCDC_INVLINE_INVERTED |
- ATMEL_LCDC_INVFRAME_INVERTED,
- .vl_bpix = 3,
- .vl_tft = 1,
- .vl_hsync_len = 5,
- .vl_left_margin = 1,
- .vl_right_margin = 33,
- .vl_vsync_len = 1,
- .vl_upper_margin = 1,
- .vl_lower_margin = 0,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
- at91_set_pio_value(AT91_PIO_PORTA, 30, 1); /* power up */
-}
-
-void lcd_disable(void)
-{
- at91_set_pio_value(AT91_PIO_PORTA, 30, 0); /* power down */
-}
-
-static void at91sam9263ek_lcd_hw_init(void)
-{
- at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */
- at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */
- at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */
- at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */
- at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */
- at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */
- at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */
- at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */
- at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */
- at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */
- at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */
- at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */
- at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */
- at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */
- at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */
- at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */
- at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */
- at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */
- at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */
- at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */
- at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */
- at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */
-
- at91_periph_clk_enable(ATMEL_ID_LCDC);
- gd->fb_base = ATMEL_BASE_SRAM0;
-}
-
-#endif
-
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
@@ -162,9 +102,6 @@ int board_init(void)
#endif
#ifdef CONFIG_USB_OHCI_NEW
at91_uhp_hw_init();
-#endif
-#ifdef CONFIG_LCD
- at91sam9263ek_lcd_hw_init();
#endif
return 0;
}
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
index 3ab9fb321a7..3af70971f34 100644
--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -18,7 +18,6 @@
#include <asm/arch/at91_common.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
-#include <lcd.h>
#include <linux/mtd/rawnand.h>
#include <atmel_lcdc.h>
#include <asm/mach-types.h>
@@ -149,77 +148,6 @@ static void at91sam9m10g45ek_usb_hw_init(void)
}
#endif
-#ifdef CONFIG_LCD
-
-vidinfo_t panel_info = {
- .vl_col = 480,
- .vl_row = 272,
- .vl_clk = 9000000,
- .vl_sync = ATMEL_LCDC_INVLINE_NORMAL |
- ATMEL_LCDC_INVFRAME_NORMAL,
- .vl_bpix = 3,
- .vl_tft = 1,
- .vl_hsync_len = 45,
- .vl_left_margin = 1,
- .vl_right_margin = 1,
- .vl_vsync_len = 1,
- .vl_upper_margin = 40,
- .vl_lower_margin = 1,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-
-void lcd_enable(void)
-{
- at91_set_A_periph(AT91_PIN_PE6, 1); /* power up */
-}
-
-void lcd_disable(void)
-{
- at91_set_A_periph(AT91_PIN_PE6, 0); /* power down */
-}
-
-static void at91sam9m10g45ek_lcd_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
- at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
- at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */
-
- at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */
- at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */
- at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */
- at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */
- at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */
- at91_set_B_periph(AT91_PIN_PE20, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */
- at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */
- at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */
- at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */
- at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */
- at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PE28, 0); /* LCDD21 */
- at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
- at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
-
- at91_periph_clk_enable(ATMEL_ID_LCDC);
-
- /* board specific(not enough SRAM) */
- gd->fb_base = 0x73E00000;
-}
-
-#endif
-
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
@@ -247,9 +175,6 @@ int board_init(void)
#endif
#ifdef CONFIG_CMD_USB
at91sam9m10g45ek_usb_hw_init();
-#endif
-#ifdef CONFIG_LCD
- at91sam9m10g45ek_lcd_hw_init();
#endif
return 0;
}
diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
index 5825ef85871..546851953a1 100644
--- a/board/atmel/at91sam9n12ek/at91sam9n12ek.c
+++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
@@ -17,7 +17,6 @@
#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
#include <debug_uart.h>
-#include <lcd.h>
#include <atmel_hlcdc.h>
#include <netdev.h>
@@ -76,35 +75,6 @@ static void at91sam9n12ek_nand_hw_init(void)
}
#endif
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 480,
- .vl_row = 272,
- .vl_clk = 9000000,
- .vl_bpix = LCD_BPP,
- .vl_sync = 0,
- .vl_tft = 1,
- .vl_hsync_len = 5,
- .vl_left_margin = 8,
- .vl_right_margin = 43,
- .vl_vsync_len = 10,
- .vl_upper_margin = 4,
- .vl_lower_margin = 12,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
- at91_set_pio_output(AT91_PIO_PORTC, 25, 0); /* power up */
-}
-
-void lcd_disable(void)
-{
- at91_set_pio_output(AT91_PIO_PORTC, 25, 1); /* power down */
-}
-
-#endif /* CONFIG_LCD */
-
#ifdef CONFIG_USB_ATMEL
void at91sam9n12ek_usb_hw_init(void)
{
@@ -135,10 +105,6 @@ int board_init(void)
at91sam9n12ek_nand_hw_init();
#endif
-#ifdef CONFIG_LCD
- at91_lcd_hw_init();
-#endif
-
#ifdef CONFIG_USB_ATMEL
at91sam9n12ek_usb_hw_init();
#endif
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index 45dfaa5f3ec..f05ee322d09 100644
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -20,7 +20,6 @@
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
-#include <lcd.h>
#include <atmel_lcdc.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -75,62 +74,6 @@ static void at91sam9rlek_nand_hw_init(void)
}
#endif
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 240,
- .vl_row = 320,
- .vl_clk = 4965000,
- .vl_sync = ATMEL_LCDC_INVLINE_INVERTED |
- ATMEL_LCDC_INVFRAME_INVERTED,
- .vl_bpix = 3,
- .vl_tft = 1,
- .vl_hsync_len = 5,
- .vl_left_margin = 1,
- .vl_right_margin = 33,
- .vl_vsync_len = 1,
- .vl_upper_margin = 1,
- .vl_lower_margin = 0,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
- at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
-}
-
-void lcd_disable(void)
-{
- at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
-}
-static void at91sam9rlek_lcd_hw_init(void)
-{
- at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */
- at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDDEN */
- at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDCC */
- at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */
- at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */
- at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */
- at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */
- at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */
- at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */
- at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */
- at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */
- at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */
- at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */
- at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */
- at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */
- at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */
- at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
- at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
-
- at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-
-#endif
-
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
@@ -154,9 +97,6 @@ int board_init(void)
#ifdef CONFIG_CMD_NAND
at91sam9rlek_nand_hw_init();
-#endif
-#ifdef CONFIG_LCD
- at91sam9rlek_lcd_hw_init();
#endif
return 0;
}
diff --git a/board/bluewater/gurnard/gurnard.c b/board/bluewater/gurnard/gurnard.c
index 35c89850bef..aee134dbc56 100644
--- a/board/bluewater/gurnard/gurnard.c
+++ b/board/bluewater/gurnard/gurnard.c
@@ -14,7 +14,6 @@
#include <dm.h>
#include <env.h>
#include <init.h>
-#include <lcd.h>
#include <net.h>
#ifndef CONFIG_DM_ETH
#include <netdev.h>
diff --git a/drivers/video/atmel_hlcdfb.c b/drivers/video/atmel_hlcdfb.c
index 6e6704c141e..2bf19a6684b 100644
--- a/drivers/video/atmel_hlcdfb.c
+++ b/drivers/video/atmel_hlcdfb.c
@@ -17,7 +17,6 @@
#include <clk.h>
#include <dm.h>
#include <fdtdec.h>
-#include <lcd.h>
#include <video.h>
#include <wait_bit.h>
#include <atmel_hlcdc.h>
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index f0db193ede7..5a7a54ada70 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -16,7 +16,6 @@
#include <asm/io.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
-#include <lcd.h>
#include <bmp_layout.h>
#include <atmel_lcdc.h>
#include <linux/delay.h>
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index b48e40bee44..ccb3842c1c2 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -25,9 +25,6 @@
*/
#define ATMEL_PMC_UHP (1 << 6)
-/* board specific (not enough SRAM) */
-#define CONFIG_SAMA5D3_LCD_BASE 0x23E00000
-
/* NOR flash */
#ifdef CONFIG_MTD_NOR_FLASH
#define CONFIG_SYS_FLASH_BASE 0x10000000
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 1092bb58a8f..b58e433c387 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -387,7 +387,6 @@ CONFIG_RTC_MC13XXX
CONFIG_RTC_MCFRRTC
CONFIG_RTC_MXS
CONFIG_RTC_PT7C4338
-CONFIG_SAMA5D3_LCD_BASE
CONFIG_SANDBOX_ARCH
CONFIG_SANDBOX_SDL
CONFIG_SANDBOX_SPI_MAX_BUS
--
2.38.0.413.g74048e4d9e-goog
next prev parent reply other threads:[~2022-10-19 11:29 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-19 11:23 [PATCH 00/39] lcd: Drop old LCD support Simon Glass
2022-10-19 11:23 ` [PATCH 01/39] video: Split SPLASH_SCREEN_ALIGN from bmp command Simon Glass
2022-10-19 11:23 ` [PATCH 02/39] Convert CONFIG_HIDE_LOGO_VERSION to Kconfig Simon Glass
2022-10-19 11:23 ` [PATCH 03/39] video: Rename CONFIG_SYS_VIDEO_LOGO_MAX_SIZE Simon Glass
2022-10-19 11:23 ` [PATCH 04/39] Convert CONFIG_VIDEO_LOGO_MAX_SIZE to Kconfig Simon Glass
2022-10-19 11:23 ` [PATCH 05/39] video: lcd: Drop console rotation Simon Glass
2022-10-19 11:23 ` [PATCH 06/39] video: Drop CONFIG_LCD_ALIGNMENT Simon Glass
2022-10-19 11:23 ` [PATCH 07/39] video: Drop CONFIG_LCD_MENU Simon Glass
2022-10-19 11:23 ` [PATCH 08/39] video: Drop CONFIG_LCD_INFO_BELOW_LOGO Simon Glass
2022-10-19 11:23 ` [PATCH 09/39] video: Drop CONFIG_LCD_INFO Simon Glass
2022-10-19 11:23 ` [PATCH 10/39] video: Move bmp_display() prototype to video.h Simon Glass
2022-10-19 11:23 ` [PATCH 11/39] api: Drop LCD implementation Simon Glass
2022-10-19 11:23 ` [PATCH 13/39] video: Drop VCXK video controller Simon Glass
2022-10-19 11:23 ` [PATCH 14/39] BuR: Drop old LCD code Simon Glass
2022-10-19 11:23 ` [PATCH 16/39] video: atmel: Drop pre-DM parts of video driver Simon Glass
2022-10-19 11:23 ` [PATCH 17/39] video: Drop ld9040 driver Simon Glass
2022-10-19 11:23 ` [PATCH 19/39] treewide: Stop enabling CONFIG_LCD Simon Glass
2022-10-19 11:23 ` Simon Glass [this message]
2022-10-19 11:23 ` [PATCH 21/39] video: samsung: Drop old LCD code Simon Glass
2022-10-19 11:23 ` [PATCH 23/39] compulab: " Simon Glass
2022-10-19 11:23 ` [PATCH 24/39] tegra: " Simon Glass
2022-10-19 11:23 ` [PATCH 25/39] BuR: ronetix: siemens: " Simon Glass
2022-10-19 11:23 ` [PATCH 26/39] video: cmd: " Simon Glass
2022-10-19 11:23 ` [PATCH 27/39] efi: " Simon Glass
2022-10-19 11:23 ` [PATCH 28/39] video: Drop remaining references to CONFIG_LCD Simon Glass
2022-10-19 11:23 ` [PATCH 29/39] fdt: Drop support for LCD fixup in simplefb Simon Glass
2022-10-19 11:23 ` [PATCH 30/39] video: Drop LCD_BPP Simon Glass
2022-10-19 11:23 ` [PATCH 31/39] video: Drop CONFIG_VIDEO Simon Glass
2022-10-19 11:23 ` [PATCH 32/39] " Simon Glass
2022-10-19 11:23 ` [PATCH 33/39] video: Drop CONFIG_LCD Simon Glass
2022-10-19 11:23 ` [PATCH 34/39] video: Drop use of the lcd header file Simon Glass
2022-10-19 11:23 ` [PATCH 35/39] video: Drop common LCD implementation Simon Glass
2022-10-19 11:23 ` [PATCH 36/39] video: Drop SPLASHIMAGE_CALLBACK Simon Glass
2022-10-19 11:23 ` [PATCH 37/39] video: Make all video options depend on DM_VIDEO Simon Glass
2022-10-19 11:23 ` [PATCH 38/39] pci: Drop test for DM_VIDEO Simon Glass
2022-10-19 11:23 ` [PATCH 39/39] video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Simon Glass
2022-10-19 17:06 ` [PATCH 00/39] lcd: Drop old LCD support Tim Harvey
2022-10-19 17:52 ` Simon Glass
2022-10-25 21:48 ` Tim Harvey
2022-10-31 13:47 ` Anatolij Gustschin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221019112356.1042065-21-sjg@chromium.org \
--to=sjg@chromium.org \
--cc=agust@denx.de \
--cc=eugen.hristev@microchip.com \
--cc=patrick.delaunay@foss.st.com \
--cc=sr@denx.de \
--cc=stelian@popies.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.