[PATCH linux dev-6.0 2/3] ARM: dts: aspeed: Setup watchdog pre-timeout interrupt

[Eddie James <eajames@linux.ibm.com>]

Specify the interrupt lines for the base SOCs that support it.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 arch/arm/boot/dts/aspeed-g5.dtsi | 3 +++
 arch/arm/boot/dts/aspeed-g6.dtsi | 4 ++++
 2 files changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index c89092c3905b..2ed19bb5710a 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -402,18 +402,21 @@ wdt1: watchdog@1e785000 {
 				compatible = "aspeed,ast2500-wdt";
 				reg = <0x1e785000 0x20>;
 				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupts = <27>;
 			};
 
 			wdt2: watchdog@1e785020 {
 				compatible = "aspeed,ast2500-wdt";
 				reg = <0x1e785020 0x20>;
 				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupts = <27>;
 			};
 
 			wdt3: watchdog@1e785040 {
 				compatible = "aspeed,ast2500-wdt";
 				reg = <0x1e785040 0x20>;
 				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupts = <27>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 1387a763a6a5..a9a53724f2af 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -531,23 +531,27 @@ uart5: serial@1e784000 {
 
 			wdt1: watchdog@1e785000 {
 				compatible = "aspeed,ast2600-wdt";
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x1e785000 0x40>;
 			};
 
 			wdt2: watchdog@1e785040 {
 				compatible = "aspeed,ast2600-wdt";
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x1e785040 0x40>;
 				status = "disabled";
 			};
 
 			wdt3: watchdog@1e785080 {
 				compatible = "aspeed,ast2600-wdt";
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x1e785080 0x40>;
 				status = "disabled";
 			};
 
 			wdt4: watchdog@1e7850c0 {
 				compatible = "aspeed,ast2600-wdt";
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x1e7850C0 0x40>;
 				status = "disabled";
 			};
-- 
2.31.1