From: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
To: <netdev@vger.kernel.org>
Cc: <davem@davemloft.net>, <kuba@kernel.org>,
<linux-kernel@vger.kernel.org>, <lxu@maxlinear.com>,
<hkallweit1@gmail.com>, <pabeni@redhat.com>,
<edumazet@google.com>, <linux@armlinux.org.uk>,
<UNGLinuxDriver@microchip.com>, <andrew@lunn.ch>,
<Ian.Saturley@microchip.com>
Subject: [PATCH net-next] net: phy: mxl-gpy: Add PHY Auto/MDI/MDI-X set driver for GPY211 chips
Date: Fri, 21 Oct 2022 15:33:05 +0530 [thread overview]
Message-ID: <20221021100305.6576-1-Raju.Lakkaraju@microchip.com> (raw)
Add support for MDI-X status and configuration for GPY211 chips
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
---
drivers/net/phy/mxl-gpy.c | 79 +++++++++++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c
index 24bae27eedef..a7b11a86bef5 100644
--- a/drivers/net/phy/mxl-gpy.c
+++ b/drivers/net/phy/mxl-gpy.c
@@ -29,6 +29,10 @@
#define PHY_ID_GPY241BM 0x67C9DE80
#define PHY_ID_GPY245B 0x67C9DEC0
+#define PHY_CTL1 0x13
+#define PHY_CTL1_MDICD BIT(3)
+#define PHY_CTL1_MDIAB BIT(2)
+#define PHY_CTL1_AMDIX BIT(0)
#define PHY_MIISTAT 0x18 /* MII state */
#define PHY_IMASK 0x19 /* interrupt mask */
#define PHY_ISTAT 0x1A /* interrupt status */
@@ -59,6 +63,13 @@
#define PHY_FWV_MAJOR_MASK GENMASK(11, 8)
#define PHY_FWV_MINOR_MASK GENMASK(7, 0)
+#define PHY_PMA_MGBT_POLARITY 0x82
+#define PHY_MDI_MDI_X_MASK GENMASK(1, 0)
+#define PHY_MDI_MDI_X_NORMAL 0x3
+#define PHY_MDI_MDI_X_AB 0x2
+#define PHY_MDI_MDI_X_CD 0x1
+#define PHY_MDI_MDI_X_CROSS 0x0
+
/* SGMII */
#define VSPEC1_SGMII_CTRL 0x08
#define VSPEC1_SGMII_CTRL_ANEN BIT(12) /* Aneg enable */
@@ -289,6 +300,36 @@ static bool gpy_sgmii_aneg_en(struct phy_device *phydev)
return (ret & VSPEC1_SGMII_CTRL_ANEN) ? true : false;
}
+static int gpy_config_mdix(struct phy_device *phydev, u8 ctrl)
+{
+ int ret;
+ u16 val;
+
+ switch (ctrl) {
+ case ETH_TP_MDI_AUTO:
+ val = PHY_CTL1_AMDIX;
+ break;
+ case ETH_TP_MDI_X:
+ val = (PHY_CTL1_MDIAB | PHY_CTL1_MDICD);
+ break;
+ case ETH_TP_MDI:
+ val = 0;
+ break;
+ default:
+ return 0;
+ }
+
+ ret = phy_modify(phydev, PHY_CTL1, PHY_CTL1_AMDIX | PHY_CTL1_MDIAB |
+ PHY_CTL1_MDICD, val);
+ if (ret < 0) {
+ phydev_err(phydev, "Error: MMD register access failed: %d\n",
+ ret);
+ return ret;
+ }
+
+ return genphy_c45_restart_aneg(phydev);
+}
+
static int gpy_config_aneg(struct phy_device *phydev)
{
bool changed = false;
@@ -304,6 +345,10 @@ static int gpy_config_aneg(struct phy_device *phydev)
: genphy_c45_pma_setup_forced(phydev);
}
+ ret = gpy_config_mdix(phydev, phydev->mdix_ctrl);
+ if (ret < 0)
+ return ret;
+
ret = genphy_c45_an_config_aneg(phydev);
if (ret < 0)
return ret;
@@ -370,6 +415,38 @@ static int gpy_config_aneg(struct phy_device *phydev)
VSPEC1_SGMII_CTRL_ANRS, VSPEC1_SGMII_CTRL_ANRS);
}
+static void gpy_update_mdix(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read(phydev, PHY_CTL1);
+ if (ret < 0) {
+ phydev_err(phydev, "Error: MDIO register access failed: %d\n",
+ ret);
+ return;
+ }
+
+ if (ret & PHY_CTL1_AMDIX)
+ phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+ else
+ if (ret & PHY_CTL1_MDICD || ret & PHY_CTL1_MDIAB)
+ phydev->mdix_ctrl = ETH_TP_MDI_X;
+ else
+ phydev->mdix_ctrl = ETH_TP_MDI;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, PHY_PMA_MGBT_POLARITY);
+ if (ret < 0) {
+ phydev_err(phydev, "Error: MMD register access failed: %d\n",
+ ret);
+ return;
+ }
+
+ if ((ret & PHY_MDI_MDI_X_MASK) < PHY_MDI_MDI_X_NORMAL)
+ phydev->mdix = ETH_TP_MDI_X;
+ else
+ phydev->mdix = ETH_TP_MDI;
+}
+
static void gpy_update_interface(struct phy_device *phydev)
{
int ret;
@@ -413,6 +490,8 @@ static void gpy_update_interface(struct phy_device *phydev)
if (phydev->speed == SPEED_2500 || phydev->speed == SPEED_1000)
genphy_read_master_slave(phydev);
+
+ gpy_update_mdix(phydev);
}
static int gpy_read_status(struct phy_device *phydev)
--
2.25.1
next reply other threads:[~2022-10-21 10:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-21 10:03 Raju Lakkaraju [this message]
2022-10-21 11:40 ` [PATCH net-next] net: phy: mxl-gpy: Add PHY Auto/MDI/MDI-X set driver for GPY211 chips Russell King (Oracle)
2022-10-21 14:01 ` Andrew Lunn
2022-10-24 7:24 ` Raju Lakkaraju
2022-10-24 11:54 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221021100305.6576-1-Raju.Lakkaraju@microchip.com \
--to=raju.lakkaraju@microchip.com \
--cc=Ian.Saturley@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=lxu@maxlinear.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.