From: Douglas Gilbert <dgilbert@interlog.com>
To: linux-scsi@vger.kernel.org
Cc: martin.petersen@oracle.com, jejb@linux.vnet.ibm.com,
hare@suse.de, bvanassche@acm.org
Subject: [PATCH v25 13/44] sg: sg_common_write add structure for arguments
Date: Sun, 23 Oct 2022 23:20:27 -0400 [thread overview]
Message-ID: <20221024032058.14077-14-dgilbert@interlog.com> (raw)
In-Reply-To: <20221024032058.14077-1-dgilbert@interlog.com>
As the number of arguments to sg_common_write() starts to grow
(more in later patches) add a structure to hold most of these
arguments.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
---
drivers/scsi/sg.c | 47 ++++++++++++++++++++++++++++++++---------------
1 file changed, 32 insertions(+), 15 deletions(-)
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index da40dd00d5a3..114203f4a292 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -179,6 +179,13 @@ struct sg_device { /* holds the state of each scsi generic device */
struct kref d_ref;
};
+struct sg_comm_wr_t { /* arguments to sg_common_write() */
+ int timeout;
+ int blocking;
+ struct sg_request *srp;
+ u8 *cmnd;
+};
+
/* tasklet or soft irq callback */
static enum rq_end_io_ret sg_rq_end_io(struct request *rq, blk_status_t status);
/* Declarations of other static functions used before they are defined */
@@ -191,8 +198,7 @@ static ssize_t sg_submit(struct sg_fd *sfp, struct file *filp,
const char __user *buf, size_t count, bool blocking,
bool read_only, bool sg_io_owned,
struct sg_request **o_srp);
-static int sg_common_write(struct sg_fd *sfp, struct sg_request *srp,
- u8 *cmnd, int timeout, int blocking);
+static int sg_common_write(struct sg_fd *sfp, struct sg_comm_wr_t *cwp);
static int sg_read_append(struct sg_request *srp, void __user *outp,
int num_xfer);
static void sg_remove_scat(struct sg_fd *sfp, struct sg_scatter_hold *schp);
@@ -489,6 +495,7 @@ sg_write(struct file *filp, const char __user *p, size_t count, loff_t *ppos)
struct sg_io_hdr v3hdr;
struct sg_header *ohp = &ov2hdr;
struct sg_io_hdr *h3p = &v3hdr;
+ struct sg_comm_wr_t cwr;
u8 cmnd[SG_MAX_CDB_SIZE];
res = sg_check_file_access(filp, __func__);
@@ -593,7 +600,11 @@ sg_write(struct file *filp, const char __user *p, size_t count, loff_t *ppos)
input_size, (unsigned int) cmnd[0],
current->comm);
}
- res = sg_common_write(sfp, srp, cmnd, sfp->timeout, blocking);
+ cwr.timeout = sfp->timeout;
+ cwr.blocking = blocking;
+ cwr.srp = srp;
+ cwr.cmnd = cmnd;
+ res = sg_common_write(sfp, &cwr);
return (res < 0) ? res : count;
}
@@ -617,6 +628,7 @@ sg_submit(struct sg_fd *sfp, struct file *filp, const char __user *buf,
int k;
struct sg_request *srp;
struct sg_io_hdr *hp;
+ struct sg_comm_wr_t cwr;
u8 cmnd[SG_MAX_CDB_SIZE];
int timeout;
unsigned long ul_timeout;
@@ -668,23 +680,28 @@ sg_submit(struct sg_fd *sfp, struct file *filp, const char __user *buf,
sg_remove_request(sfp, srp);
return -EPERM;
}
- k = sg_common_write(sfp, srp, cmnd, timeout, blocking);
+ cwr.timeout = timeout;
+ cwr.blocking = blocking;
+ cwr.srp = srp;
+ cwr.cmnd = cmnd;
+ k = sg_common_write(sfp, &cwr);
if (k < 0)
return k;
if (o_srp)
- *o_srp = srp;
+ *o_srp = cwr.srp;
return count;
}
static int
-sg_common_write(struct sg_fd *sfp, struct sg_request *srp,
- u8 *cmnd, int timeout, int blocking)
+sg_common_write(struct sg_fd *sfp, struct sg_comm_wr_t *cwrp)
{
- int k, at_head;
+ bool at_head;
+ int k;
struct sg_device *sdp = sfp->parentdp;
+ struct sg_request *srp = cwrp->srp;
struct sg_io_hdr *hp = &srp->header;
- srp->data.cmd_opcode = cmnd[0]; /* hold opcode of command */
+ srp->data.cmd_opcode = cwrp->cmnd[0]; /* hold opcode of command */
hp->status = 0;
hp->masked_status = 0;
hp->msg_status = 0;
@@ -693,14 +710,14 @@ sg_common_write(struct sg_fd *sfp, struct sg_request *srp,
hp->driver_status = 0;
hp->resid = 0;
SG_LOG(4, sfp, "%s: opcode=0x%02x, cmd_sz=%d\n", __func__,
- (int)cmnd[0], hp->cmd_len);
+ (int)cwrp->cmnd[0], hp->cmd_len);
if (hp->dxfer_len >= SZ_256M) {
sg_remove_request(sfp, srp);
return -EINVAL;
}
- k = sg_start_req(srp, cmnd);
+ k = sg_start_req(srp, cwrp->cmnd);
if (k) {
SG_LOG(1, sfp, "%s: start_req err=%d\n", __func__, k);
sg_finish_scsi_blk_rq(srp);
@@ -721,13 +738,13 @@ sg_common_write(struct sg_fd *sfp, struct sg_request *srp,
hp->duration = jiffies_to_msecs(jiffies);
if (hp->interface_id != '\0' && /* v3 (or later) interface */
(SG_FLAG_Q_AT_TAIL & hp->flags))
- at_head = 0;
+ at_head = false;
else
- at_head = 1;
+ at_head = true;
- if (!blocking)
+ if (!srp->sg_io_owned)
atomic_inc(&sfp->submitted);
- srp->rq->timeout = timeout;
+ srp->rq->timeout = cwrp->timeout;
kref_get(&sfp->f_ref); /* sg_rq_end_io() does kref_put(). */
srp->rq->end_io = sg_rq_end_io;
blk_execute_rq_nowait(srp->rq, at_head);
--
2.37.3
next prev parent reply other threads:[~2022-10-24 3:25 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-24 3:20 [PATCH v25 00/44] sg: add v4 interface Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 01/44] sg: move functions around Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 02/44] sg: remove typedefs, type+formatting cleanup Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 03/44] sg: sg_log and is_enabled Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 04/44] sg: remove typedefs, type+formatting cleanup Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 05/44] sg: bitops in sg_device Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 06/44] sg: make open count an atomic Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 07/44] sg: move header to uapi section Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 08/44] sg: speed sg_poll and sg_get_num_waiting Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 09/44] sg: sg_allow_if_err_recovery and renames Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 10/44] sg: change rwlock to spinlock Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 11/44] sg: ioctl handling Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 12/44] sg: split sg_read Douglas Gilbert
2022-10-24 3:20 ` Douglas Gilbert [this message]
2022-10-24 3:20 ` [PATCH v25 14/44] sg: rework sg_vma_fault Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 15/44] sg: rework sg_mmap Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 16/44] sg: replace sg_allow_access Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 17/44] sg: rework scatter gather handling Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 18/44] sg: introduce request state machine Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 19/44] sg: sg_find_srp_by_id Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 20/44] sg: sg_fill_request_element Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 21/44] sg: printk change %p to %pK Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 22/44] sg: xarray for fds in device Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 23/44] sg: xarray for reqs in fd Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 24/44] sg: replace rq array with xarray Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 25/44] sg: sense buffer rework Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 26/44] sg: add sg v4 interface support Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 27/44] sg: rework debug info Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 28/44] sg: add 8 byte SCSI LUN to sg_scsi_id Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 29/44] sg: expand sg_comm_wr_t Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 30/44] sg: add sg_iosubmit_v3 and sg_ioreceive_v3 ioctls Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 31/44] sg: move procfs objects to avoid forward decls Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 32/44] sg: protect multiple receivers Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 33/44] sg: first debugfs support Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 34/44] sg: rework mmap support Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 35/44] sg: defang allow_dio Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 36/44] sg: warn v3 write system call users Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 37/44] sg: add mmap_sz tracking Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 38/44] sg: track lowest inactive and await indexes Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 39/44] sg: remove unit attention check for device changed Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 40/44] sg: no_dxfer: move to/from kernel buffers Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 41/44] sg: add bio_poll support Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 42/44] sg: add statistics similar to st Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 43/44] sg: rework command completion when removed device Douglas Gilbert
2022-10-24 3:20 ` [PATCH v25 44/44] sg: bump version to 4.0.14 Douglas Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221024032058.14077-14-dgilbert@interlog.com \
--to=dgilbert@interlog.com \
--cc=bvanassche@acm.org \
--cc=hare@suse.de \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.