Re: [PATCH v2 1/2] dt-bindings: regulator: Add bindings for Richtek RT6190 regulator

[Rob Herring <robh@kernel.org>]

On Fri, Oct 21, 2022 at 10:40:58AM +0800, cy_huang wrote:
> From: ChiYuan Huang <cy_huang@richtek.com>
> 
> Add devicetree binding for Richtek RT6190 4-Switch buckboost controller.
> 
> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> ---
> Since v2:
> - Rename binding filename to 'richtek,rt6190.yaml'
> 
> ---
>  .../bindings/regulator/richtek,rt6190.yaml         | 77 ++++++++++++++++++++++
>  1 file changed, 77 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml
> 
> diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml
> new file mode 100644
> index 00000000..dced404
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml
> @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/richtek,rt6190.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Richtek RT6190 4-Switch BuckBoost controller
> +
> +maintainers:
> +  - ChiYuan Huang <cy_huang@richtek.com>
> +
> +description: |
> +  The RT6190 is 4-Switch BuckBoost controller designed for converting input
> +  voltage to output voltage that can be equal to, higher or lower than input
> +  voltage. It operates with wide input voltage range from 4.5V to 36V, and
> +  the output voltage can be set from 3V to 36V by external FB pin. It's commonly
> +  used for the application like as BuckBoost bus upply, docking station and USB

typo: upply

> +  power delivery product.
> +
> +  Datasheet is available at
> +  https://www.richtek.com/assets/product_file/RT6190/DS6190-02.pdf
> +
> +allOf:
> +  - $ref: regulator.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - richtek,rt6190
> +
> +  reg:
> +    maxItems: 1
> +
> +  enable-gpios: true

       maxItems: 1

> +
> +  wakeup-source: true
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  regulator-allowed-modes:
> +    description: |
> +      buck allowed operating mode
> +        0: PSM mode (light load Power Saving Mode)
> +        1: FCCM mode (Forced-CCM mode)

       maxItems: 2

> +    items:
> +      enum: [0, 1]
> +
> +required:
> +  - compatible
> +  - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      regulator@2c {
> +        compatible = "richtek,rt6190";
> +        reg = <0x2c>;
> +        wakeup-source;
> +        interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
> +        enable-gpios = <&gpio26 1 GPIO_ACTIVE_HIGH>;
> +        regulator-name = "richtek,rt6190-buckboost";
> +        regulator-min-microvolt = <3000000>;
> +        regulator-max-microvolt = <32000000>;
> +        regulator-min-microamp = <306000>;
> +        regulator-max-microamp = <12114000>;
> +        regulator-allowed-modes = <0 1>;
> +      };
> +    };
> -- 
> 2.7.4
> 
>