All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Huth <thuth@redhat.com>
To: Stefan Hajnoczi <stefanha@redhat.com>, qemu-devel@nongnu.org
Cc: "Xuzhou Cheng" <xuzhou.cheng@windriver.com>,
	"Bin Meng" <bin.meng@windriver.com>,
	"Marc-André Lureau" <marcandre.lureau@redhat.com>
Subject: [PULL 14/21] tests/qtest: Use send/recv for socket communication
Date: Fri, 28 Oct 2022 15:22:57 +0200	[thread overview]
Message-ID: <20221028132304.829103-15-thuth@redhat.com> (raw)
In-Reply-To: <20221028132304.829103-1-thuth@redhat.com>

From: Xuzhou Cheng <xuzhou.cheng@windriver.com>

Socket communication in the libqtest and libqmp codes uses read()
and write() which work on any file descriptor on *nix, and sockets
in *nix are an example of a file descriptor.

However sockets on Windows do not use *nix-style file descriptors,
so read() and write() cannot be used on sockets on Windows.
Switch over to use send() and recv() instead which work on both
Windows and *nix.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221028045736.679903-3-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 include/qemu/sockets.h | 13 +++++++++++++
 tests/qtest/libqmp.c   |  5 +++--
 tests/qtest/libqtest.c |  5 +++--
 util/osdep.c           | 22 ++++++++++++++++++++++
 4 files changed, 41 insertions(+), 4 deletions(-)

diff --git a/include/qemu/sockets.h b/include/qemu/sockets.h
index 036745e586..61648f3f3c 100644
--- a/include/qemu/sockets.h
+++ b/include/qemu/sockets.h
@@ -33,6 +33,19 @@ int qemu_socketpair(int domain, int type, int protocol, int sv[2]);
 #endif
 
 int qemu_accept(int s, struct sockaddr *addr, socklen_t *addrlen);
+/*
+ * A variant of send(2) which handles partial send.
+ *
+ * Return the number of bytes transferred over the socket.
+ * Set errno if fewer than `count' bytes are sent.
+ *
+ * This function don't work with non-blocking socket's.
+ * Any of the possibilities with non-blocking socket's is bad:
+ *   - return a short write (then name is wrong)
+ *   - busy wait adding (errno == EAGAIN) to the loop
+ */
+ssize_t qemu_send_full(int s, const void *buf, size_t count)
+    G_GNUC_WARN_UNUSED_RESULT;
 int socket_set_cork(int fd, int v);
 int socket_set_nodelay(int fd);
 void qemu_socket_set_block(int fd);
diff --git a/tests/qtest/libqmp.c b/tests/qtest/libqmp.c
index ade26c15f0..2b08382e5d 100644
--- a/tests/qtest/libqmp.c
+++ b/tests/qtest/libqmp.c
@@ -23,6 +23,7 @@
 #endif
 
 #include "qemu/cutils.h"
+#include "qemu/sockets.h"
 #include "qapi/error.h"
 #include "qapi/qmp/json-parser.h"
 #include "qapi/qmp/qjson.h"
@@ -36,7 +37,7 @@ typedef struct {
 
 static void socket_send(int fd, const char *buf, size_t size)
 {
-    size_t res = qemu_write_full(fd, buf, size);
+    ssize_t res = qemu_send_full(fd, buf, size);
 
     assert(res == size);
 }
@@ -69,7 +70,7 @@ QDict *qmp_fd_receive(int fd)
         ssize_t len;
         char c;
 
-        len = read(fd, &c, 1);
+        len = recv(fd, &c, 1, 0);
         if (len == -1 && errno == EINTR) {
             continue;
         }
diff --git a/tests/qtest/libqtest.c b/tests/qtest/libqtest.c
index b23eb3edc3..b01846fd98 100644
--- a/tests/qtest/libqtest.c
+++ b/tests/qtest/libqtest.c
@@ -27,6 +27,7 @@
 #include "libqmp.h"
 #include "qemu/ctype.h"
 #include "qemu/cutils.h"
+#include "qemu/sockets.h"
 #include "qapi/qmp/qdict.h"
 #include "qapi/qmp/qjson.h"
 #include "qapi/qmp/qlist.h"
@@ -428,7 +429,7 @@ void qtest_quit(QTestState *s)
 
 static void socket_send(int fd, const char *buf, size_t size)
 {
-    size_t res = qemu_write_full(fd, buf, size);
+    ssize_t res = qemu_send_full(fd, buf, size);
 
     assert(res == size);
 }
@@ -460,7 +461,7 @@ static GString *qtest_client_socket_recv_line(QTestState *s)
         ssize_t len;
         char buffer[1024];
 
-        len = read(s->fd, buffer, sizeof(buffer));
+        len = recv(s->fd, buffer, sizeof(buffer), 0);
         if (len == -1 && errno == EINTR) {
             continue;
         }
diff --git a/util/osdep.c b/util/osdep.c
index 746d5f7d71..77c1a6c562 100644
--- a/util/osdep.c
+++ b/util/osdep.c
@@ -502,6 +502,28 @@ int qemu_accept(int s, struct sockaddr *addr, socklen_t *addrlen)
     return ret;
 }
 
+ssize_t qemu_send_full(int s, const void *buf, size_t count)
+{
+    ssize_t ret = 0;
+    ssize_t total = 0;
+
+    while (count) {
+        ret = send(s, buf, count, 0);
+        if (ret < 0) {
+            if (errno == EINTR) {
+                continue;
+            }
+            break;
+        }
+
+        count -= ret;
+        buf += ret;
+        total += ret;
+    }
+
+    return total;
+}
+
 void qemu_set_hw_version(const char *version)
 {
     hw_version = version;
-- 
2.31.1



  parent reply	other threads:[~2022-10-28 13:25 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-28 13:22 [PULL 00/21] s390x and qtest patches Thomas Huth
2022-10-28 13:22 ` [PULL 01/21] s390x/pv: remove semicolon from macro definition Thomas Huth
2022-10-28 13:22 ` [PULL 02/21] s390x: step down as general arch maintainer Thomas Huth
2022-10-28 13:22 ` [PULL 03/21] s390x/tod-kvm: don't save/restore the TOD in PV guests Thomas Huth
2022-10-28 13:22 ` [PULL 04/21] tests/tcg/s390x: Test compiler flags only once, not every time Thomas Huth
2022-10-28 13:22 ` [PULL 05/21] target/s390x: Fix emulation of the VISTR instruction Thomas Huth
2022-10-28 13:22 ` [PULL 06/21] tests/tcg/s390x: Add a test for the vistr instruction Thomas Huth
2022-10-28 13:22 ` [PULL 07/21] MAINTAINERS: target/s390x/: add Ilya as reviewer Thomas Huth
2022-10-28 13:22 ` [PULL 08/21] tests/qtest/tpm: Clean up remainders of swtpm Thomas Huth
2022-10-28 13:22 ` [PULL 09/21] tests/qtest/cxl-test: Remove temporary directories after testing Thomas Huth
2022-10-28 13:22 ` [PULL 10/21] tests/qtest/libqos/e1000e: Use e1000_regs.h Thomas Huth
2022-10-28 13:22 ` [PULL 11/21] tests/vm: update openbsd to release 7.2 Thomas Huth
2022-10-28 13:22 ` [PULL 12/21] tests: Add sndio to the FreeBSD CI containers / VM Thomas Huth
2022-10-28 13:22 ` [PULL 13/21] accel/qtest: Support qtest accelerator for Windows Thomas Huth
2022-10-28 13:22 ` Thomas Huth [this message]
2022-10-28 13:22 ` [PULL 15/21] tests/qtest: Support libqtest to build and run on Windows Thomas Huth
2022-10-28 13:22 ` [PULL 16/21] tests/qtest: device-plug-test: Reverse the usage of double/single quotes Thomas Huth
2022-10-28 13:23 ` [PULL 17/21] tests/qtest: Use EXIT_FAILURE instead of magic number Thomas Huth
2022-10-28 13:23 ` [PULL 18/21] tests/qtest: libqtest: Introduce qtest_wait_qemu() Thomas Huth
2022-10-28 13:23 ` [PULL 19/21] tests/qtest: migration-test: Make sure QEMU process "to" exited after migration is canceled Thomas Huth
2022-10-28 13:23 ` [PULL 20/21] tests/qtest: libqos: Do not build virtio-9p unconditionally Thomas Huth
2022-10-28 13:23 ` [PULL 21/21] tests/qtest: libqtest: Correct the timeout unit of blocking receive calls for win32 Thomas Huth
2022-10-31 10:27 ` [PULL 00/21] s390x and qtest patches Stefan Hajnoczi
2022-10-31 18:37 ` Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221028132304.829103-15-thuth@redhat.com \
    --to=thuth@redhat.com \
    --cc=bin.meng@windriver.com \
    --cc=marcandre.lureau@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    --cc=xuzhou.cheng@windriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.