All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bob Pearson <rpearsonhpe@gmail.com>
To: jgg@nvidia.com, leon@kernel.org, zyjzyj2000@gmail.com,
	linux-rdma@vger.kernel.org
Cc: Bob Pearson <rpearsonhpe@gmail.com>
Subject: [PATCH for-next v2 15/18] RDMA/rxe: Extend response packets for frags
Date: Mon, 31 Oct 2022 15:28:04 -0500	[thread overview]
Message-ID: <20221031202805.19138-15-rpearsonhpe@gmail.com> (raw)
In-Reply-To: <20221031202805.19138-1-rpearsonhpe@gmail.com>

Extend prepare_ack_packet(), read_reply() and send_common_ack() in
rxe_resp.c to support fragmented skbs.  Adjust calls to these routines
for the changed API.

This is in preparation for using fragmented skbs.

Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
---
 drivers/infiniband/sw/rxe/rxe_resp.c | 89 +++++++++++++++++-----------
 1 file changed, 55 insertions(+), 34 deletions(-)

diff --git a/drivers/infiniband/sw/rxe/rxe_resp.c b/drivers/infiniband/sw/rxe/rxe_resp.c
index 8868415b71b6..905e19ee9ca5 100644
--- a/drivers/infiniband/sw/rxe/rxe_resp.c
+++ b/drivers/infiniband/sw/rxe/rxe_resp.c
@@ -660,10 +660,8 @@ static enum resp_states atomic_reply(struct rxe_qp *qp,
 
 static struct sk_buff *prepare_ack_packet(struct rxe_qp *qp,
 					  struct rxe_pkt_info *ack,
-					  int opcode,
-					  int payload,
-					  u32 psn,
-					  u8 syndrome)
+					  int opcode, int payload, u32 psn,
+					  u8 syndrome, bool *fragp)
 {
 	struct rxe_dev *rxe = to_rdev(qp->ibqp.device);
 	struct sk_buff *skb;
@@ -682,7 +680,7 @@ static struct sk_buff *prepare_ack_packet(struct rxe_qp *qp,
 	ack->psn = psn;
 	ack->port_num = 1;
 
-	skb = rxe_init_packet(qp, &qp->pri_av, ack, NULL);
+	skb = rxe_init_packet(qp, &qp->pri_av, ack, fragp);
 	if (!skb)
 		return NULL;
 
@@ -698,12 +696,14 @@ static struct sk_buff *prepare_ack_packet(struct rxe_qp *qp,
 		atmack_set_orig(ack, qp->resp.res->atomic.orig_val);
 
 	err = rxe_prepare(&qp->pri_av, ack, skb);
-	if (err) {
-		kfree_skb(skb);
-		return NULL;
-	}
+	if (err)
+		goto err_free_skb;
 
 	return skb;
+
+err_free_skb:
+	kfree_skb(skb);
+	return NULL;
 }
 
 /**
@@ -775,6 +775,8 @@ static enum resp_states read_reply(struct rxe_qp *qp,
 	struct resp_res *res = qp->resp.res;
 	struct rxe_mr *mr;
 	int skb_offset = 0;
+	bool frag;
+	enum rxe_mr_copy_op op;
 
 	if (!res) {
 		res = rxe_prepare_res(qp, req_pkt, RXE_READ_MASK);
@@ -787,8 +789,10 @@ static enum resp_states read_reply(struct rxe_qp *qp,
 			qp->resp.mr = NULL;
 		} else {
 			mr = rxe_recheck_mr(qp, res->read.rkey);
-			if (!mr)
-				return RESPST_ERR_RKEY_VIOLATION;
+			if (!mr) {
+				state = RESPST_ERR_RKEY_VIOLATION;
+				goto err_out;
+			}
 		}
 
 		if (res->read.resid <= mtu)
@@ -797,8 +801,10 @@ static enum resp_states read_reply(struct rxe_qp *qp,
 			opcode = IB_OPCODE_RC_RDMA_READ_RESPONSE_FIRST;
 	} else {
 		mr = rxe_recheck_mr(qp, res->read.rkey);
-		if (!mr)
-			return RESPST_ERR_RKEY_VIOLATION;
+		if (!mr) {
+			state = RESPST_ERR_RKEY_VIOLATION;
+			goto err_out;
+		}
 
 		if (res->read.resid > mtu)
 			opcode = IB_OPCODE_RC_RDMA_READ_RESPONSE_MIDDLE;
@@ -806,35 +812,35 @@ static enum resp_states read_reply(struct rxe_qp *qp,
 			opcode = IB_OPCODE_RC_RDMA_READ_RESPONSE_LAST;
 	}
 
-	res->state = rdatm_res_state_next;
-
 	payload = min_t(int, res->read.resid, mtu);
 
 	skb = prepare_ack_packet(qp, &ack_pkt, opcode, payload,
-				 res->cur_psn, AETH_ACK_UNLIMITED);
-	if (!skb)
-		return RESPST_ERR_RNR;
+				 res->cur_psn, AETH_ACK_UNLIMITED, &frag);
+	if (!skb) {
+		state = RESPST_ERR_RNR;
+		goto err_put_mr;
+	}
 
+	op = frag ? RXE_FRAG_FROM_MR : RXE_COPY_FROM_MR;
 	err = rxe_copy_mr_data(skb, mr, res->read.va, payload_addr(&ack_pkt),
-			       skb_offset, payload, RXE_COPY_FROM_MR);
+			       skb_offset, payload, op);
 	if (err) {
-		kfree_skb(skb);
-		rxe_put(mr);
-		return RESPST_ERR_RKEY_VIOLATION;
+		state = RESPST_ERR_RKEY_VIOLATION;
+		goto err_free_skb;
 	}
 
-	if (mr)
-		rxe_put(mr);
-
-	if (bth_pad(&ack_pkt)) {
-		u8 *pad = payload_addr(&ack_pkt) + payload;
-
-		memset(pad, 0, bth_pad(&ack_pkt));
+	err = rxe_prepare_pad_icrc(&ack_pkt, skb, payload, frag);
+	if (err) {
+		state = RESPST_ERR_RNR;
+		goto err_free_skb;
 	}
 
 	err = rxe_xmit_packet(qp, &ack_pkt, skb);
-	if (err)
-		return RESPST_ERR_RNR;
+	if (err) {
+		/* rxe_xmit_packet will consume the packet */
+		state = RESPST_ERR_RNR;
+		goto err_put_mr;
+	}
 
 	res->read.va += payload;
 	res->read.resid -= payload;
@@ -851,6 +857,16 @@ static enum resp_states read_reply(struct rxe_qp *qp,
 		state = RESPST_CLEANUP;
 	}
 
+	/* keep these after all error exits */
+	res->state = rdatm_res_state_next;
+	rxe_put(mr);
+	return state;
+
+err_free_skb:
+	kfree_skb(skb);
+err_put_mr:
+	rxe_put(mr);
+err_out:
 	return state;
 }
 
@@ -1041,14 +1057,19 @@ static int send_common_ack(struct rxe_qp *qp, u8 syndrome, u32 psn,
 				  int opcode, const char *msg)
 {
 	int err;
-	struct rxe_pkt_info ack_pkt;
+	struct rxe_pkt_info ack;
 	struct sk_buff *skb;
+	int payload = 0;
 
-	skb = prepare_ack_packet(qp, &ack_pkt, opcode, 0, psn, syndrome);
+	skb = prepare_ack_packet(qp, &ack, opcode, payload,
+				 psn, syndrome, NULL);
 	if (!skb)
 		return -ENOMEM;
 
-	err = rxe_xmit_packet(qp, &ack_pkt, skb);
+	/* doesn't fail if frag == false */
+	(void)rxe_prepare_pad_icrc(&ack, skb, payload, false);
+
+	err = rxe_xmit_packet(qp, &ack, skb);
 	if (err)
 		pr_err_ratelimited("Failed sending %s\n", msg);
 
-- 
2.34.1


  parent reply	other threads:[~2022-10-31 20:28 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-31 20:27 [PATCH for-next v2 01/18] RDMA/rxe: Isolate code to fill request roce headers Bob Pearson
2022-10-31 20:27 ` [PATCH for-next v2 02/18] RDMA/rxe: Isolate request payload code in a subroutine Bob Pearson
2022-10-31 20:27 ` [PATCH for-next v2 03/18] RDMA/rxe: Remove paylen parameter from rxe_init_packet Bob Pearson
2022-10-31 20:27 ` [PATCH for-next v2 04/18] RDMA/rxe: Isolate code to build request packet Bob Pearson
2022-10-31 20:27 ` [PATCH for-next v2 05/18] RDMA/rxe: Add sg fragment ops Bob Pearson
2022-11-24 19:05   ` Jason Gunthorpe
2022-10-31 20:27 ` [PATCH for-next v2 06/18] RDMA/rxe: Add rxe_add_frag() to rxe_mr.c Bob Pearson
2022-11-24 19:10   ` Jason Gunthorpe
2022-11-30 20:53     ` Bob Pearson
2022-11-30 23:36       ` Jason Gunthorpe
2022-12-01  0:16         ` Bob Pearson
2022-12-01  0:20           ` Jason Gunthorpe
2022-12-01  0:36             ` Bob Pearson
2022-12-01  0:41               ` Jason Gunthorpe
2022-12-01  5:05                 ` Bob Pearson
2022-12-01 12:51                   ` Jason Gunthorpe
2022-12-01 15:04                 ` Bob Pearson
2022-12-01 15:16                   ` Bob Pearson
2022-12-01 15:38                     ` Bob Pearson
2022-12-01 15:39                       ` Jason Gunthorpe
2022-12-01 17:11                         ` Bob Pearson
2022-12-01 18:00                           ` Jason Gunthorpe
2022-10-31 20:27 ` [PATCH for-next v2 07/18] RDMA/rxe: Add routine to compute the number of frags Bob Pearson
2022-11-24 19:15   ` Jason Gunthorpe
2022-10-31 20:27 ` [PATCH for-next v2 08/18] RDMA/rxe: Extend rxe_mr_copy to support skb frags Bob Pearson
2022-10-31 20:27 ` [PATCH for-next v2 09/18] RDMA/rxe: Add routine to compute number of frags for dma Bob Pearson
2022-11-24 19:16   ` Jason Gunthorpe
2022-10-31 20:27 ` [PATCH for-next v2 10/18] RDMA/rxe: Extend copy_data to support skb frags Bob Pearson
2022-10-31 20:28 ` [PATCH for-next v2 11/18] RDMA/rxe: Replace rxe by qp as a parameter Bob Pearson
2022-10-31 20:28 ` [PATCH for-next v2 12/18] RDMA/rxe: Extend rxe_init_packet() to support frags Bob Pearson
2022-10-31 20:28 ` [PATCH for-next v2 13/18] RDMA/rxe: Extend rxe_icrc.c " Bob Pearson
2022-10-31 20:28 ` [PATCH for-next v2 14/18] RDMA/rxe: Extend rxe_init_req_packet() for frags Bob Pearson
2022-10-31 20:28 ` Bob Pearson [this message]
2022-10-31 20:28 ` [PATCH for-next v2 16/18] RDMA/rxe: Extend send/write_data_in() " Bob Pearson
2022-10-31 20:28 ` [PATCH for-next v2 17/18] RDMA/rxe: Extend do_read() in rxe_comp,c " Bob Pearson
2022-10-31 20:28 ` [PATCH for-next v2 18/18] RDMA/rxe: Enable sg code in rxe Bob Pearson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221031202805.19138-15-rpearsonhpe@gmail.com \
    --to=rpearsonhpe@gmail.com \
    --cc=jgg@nvidia.com \
    --cc=leon@kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=zyjzyj2000@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.