[PATCH 1/2] devlink: Expose port function commands to control roce

[Daniel Jurgens <danielj@nvidia.com>]

From: Yishai Hadas <yishaih@nvidia.com>

Expose port function commands to turn on / off roce, this is used to
control the port roce device capabilities.

When roce is disabled for a function of the port, function cannot create
any roce specific resources (e.g GID table).
It also saves system memory utilization. For example disabling roce on a
VF/SF saves 1 Mbytes of system memory per function.

Example of a PCI VF port which supports function configuration:
Set roce of the VF's port function.

$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
    function:
        hw_addr 00:00:00:00:00:00 roce on

$ devlink port function set pci/0000:06:00.0/2 roce off

$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
    function:
        hw_addr 00:11:22:33:44:55 roce off

Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 .../networking/devlink/devlink-port.rst       |  5 +-
 include/net/devlink.h                         | 20 ++++++
 include/uapi/linux/devlink.h                  |  1 +
 net/core/devlink.c                            | 61 +++++++++++++++++++
 4 files changed, 86 insertions(+), 1 deletion(-)

diff --git a/Documentation/networking/devlink/devlink-port.rst b/Documentation/networking/devlink/devlink-port.rst
index 7627b1da01f2..fd191622ab68 100644
--- a/Documentation/networking/devlink/devlink-port.rst
+++ b/Documentation/networking/devlink/devlink-port.rst
@@ -110,7 +110,7 @@ devlink ports for both the controllers.
 Function configuration
 ======================
 
-A user can configure the function attribute before enumerating the PCI
+A user can configure one or more function attributes before enumerating the PCI
 function. Usually it means, user should configure function attribute
 before a bus specific device for the function is created. However, when
 SRIOV is enabled, virtual function devices are created on the PCI bus.
@@ -122,6 +122,9 @@ A user may set the hardware address of the function using
 'devlink port function set hw_addr' command. For Ethernet port function
 this means a MAC address.
 
+A user may set also the roce capability of the function using
+'devlink port function set roce' command.
+
 Subfunction
 ============
 
diff --git a/include/net/devlink.h b/include/net/devlink.h
index ba6b8b094943..c26edd5c72fa 100644
--- a/include/net/devlink.h
+++ b/include/net/devlink.h
@@ -1414,6 +1414,26 @@ struct devlink_ops {
 	int (*port_function_hw_addr_set)(struct devlink_port *port,
 					 const u8 *hw_addr, int hw_addr_len,
 					 struct netlink_ext_ack *extack);
+	/**
+	 * @port_function_roce_get: Port function's roce get function.
+	 *
+	 * Should be used by device drivers to report the roce state of
+	 * a function managed by the devlink port. Driver should return
+	 * -EOPNOTSUPP if it doesn't support port function handling for
+	 * a particular port.
+	 */
+	int (*port_function_roce_get)(struct devlink_port *port, bool *on,
+				      struct netlink_ext_ack *extack);
+	/**
+	 * @port_function_roce_set: Port function's roce set function.
+	 *
+	 * Should be used by device drivers to enable/disable the roce state of
+	 * a function managed by the devlink port. Driver should return
+	 * -EOPNOTSUPP if it doesn't support port function handling for
+	 * a particular port.
+	 */
+	int (*port_function_roce_set)(struct devlink_port *port, bool on,
+				      struct netlink_ext_ack *extack);
 	/**
 	 * port_new() - Add a new port function of a specified flavor
 	 * @devlink: Devlink instance
diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index 2f24b53a87a5..16efff56fc0d 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -658,6 +658,7 @@ enum devlink_port_function_attr {
 	DEVLINK_PORT_FUNCTION_ATTR_HW_ADDR,	/* binary */
 	DEVLINK_PORT_FN_ATTR_STATE,	/* u8 */
 	DEVLINK_PORT_FN_ATTR_OPSTATE,	/* u8 */
+	DEVLINK_PORT_FN_ATTR_ROCE,	/* u8 */
 
 	__DEVLINK_PORT_FUNCTION_ATTR_MAX,
 	DEVLINK_PORT_FUNCTION_ATTR_MAX = __DEVLINK_PORT_FUNCTION_ATTR_MAX - 1
diff --git a/net/core/devlink.c b/net/core/devlink.c
index 89baa7c0938b..4f9d81888699 100644
--- a/net/core/devlink.c
+++ b/net/core/devlink.c
@@ -199,6 +199,7 @@ static const struct nla_policy devlink_function_nl_policy[DEVLINK_PORT_FUNCTION_
 	[DEVLINK_PORT_FN_ATTR_STATE] =
 		NLA_POLICY_RANGE(NLA_U8, DEVLINK_PORT_FN_STATE_INACTIVE,
 				 DEVLINK_PORT_FN_STATE_ACTIVE),
+	[DEVLINK_PORT_FN_ATTR_ROCE] = NLA_POLICY_RANGE(NLA_U8, 0, 1),
 };
 
 static const struct nla_policy devlink_selftest_nl_policy[DEVLINK_ATTR_SELFTEST_ID_MAX + 1] = {
@@ -691,6 +692,33 @@ devlink_sb_tc_index_get_from_attrs(struct devlink_sb *devlink_sb,
 	return 0;
 }
 
+static int devlink_port_function_roce_fill(const struct devlink_ops *ops,
+					   struct devlink_port *port,
+					   struct sk_buff *msg,
+					   struct netlink_ext_ack *extack,
+					   bool *msg_updated)
+{
+	bool on;
+	int err;
+
+	if (!ops->port_function_roce_get)
+		return 0;
+
+	err = ops->port_function_roce_get(port, &on, extack);
+	if (err) {
+		if (err == -EOPNOTSUPP)
+			return 0;
+		return err;
+	}
+
+	err = nla_put_u8(msg, DEVLINK_PORT_FN_ATTR_ROCE, on);
+	if (err)
+		return err;
+
+	*msg_updated = true;
+	return 0;
+}
+
 static int
 devlink_sb_tc_index_get_from_info(struct devlink_sb *devlink_sb,
 				  struct genl_info *info,
@@ -1248,6 +1276,25 @@ static int devlink_port_fn_state_fill(const struct devlink_ops *ops,
 	return 0;
 }
 
+static int
+devlink_port_fn_roce_set(struct devlink_port *port,
+			 const struct nlattr *attr,
+			 struct netlink_ext_ack *extack)
+{
+	const struct devlink_ops *ops = port->devlink->ops;
+	bool on;
+
+	on = nla_get_u8(attr);
+
+	if (!ops->port_function_roce_set) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "Port doesn't support roce function attribute");
+		return -EOPNOTSUPP;
+	}
+
+	return ops->port_function_roce_set(port, on, extack);
+}
+
 static int
 devlink_nl_port_function_attrs_put(struct sk_buff *msg, struct devlink_port *port,
 				   struct netlink_ext_ack *extack)
@@ -1266,6 +1313,12 @@ devlink_nl_port_function_attrs_put(struct sk_buff *msg, struct devlink_port *por
 					   &msg_updated);
 	if (err)
 		goto out;
+
+	err = devlink_port_function_roce_fill(ops, port, msg, extack,
+					      &msg_updated);
+	if (err)
+		goto out;
+
 	err = devlink_port_fn_state_fill(ops, port, msg, extack, &msg_updated);
 out:
 	if (err || !msg_updated)
@@ -1670,6 +1723,14 @@ static int devlink_port_function_set(struct devlink_port *port,
 		if (err)
 			return err;
 	}
+
+	attr = tb[DEVLINK_PORT_FN_ATTR_ROCE];
+	if (attr) {
+		err = devlink_port_fn_roce_set(port, attr, extack);
+		if (err)
+			return err;
+	}
+
 	/* Keep this as the last function attribute set, so that when
 	 * multiple port function attributes are set along with state,
 	 * Those can be applied first before activating the state.
-- 
2.27.0