From: Thomas Petazzoni via buildroot <buildroot@buildroot.org>
To: buildroot@buildroot.org
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Suniel Mahesh <sunil@amarulasolutions.com>
Subject: [Buildroot] [PATCH 2/3] configs/rock_pi_4: remove defconfig
Date: Wed, 2 Nov 2022 21:18:56 +0100 [thread overview]
Message-ID: <20221102201858.555294-3-thomas.petazzoni@bootlin.com> (raw)
In-Reply-To: <20221102201858.555294-1-thomas.petazzoni@bootlin.com>
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3259671395
Cc: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 2 -
board/radxa/rockpi-4/extlinux.conf | 4 --
board/radxa/rockpi-4/genimage.cfg | 39 -------------------
board/radxa/rockpi-4/post-build.sh | 5 ---
board/radxa/rockpi-4/readme.txt | 61 ------------------------------
configs/rock_pi_4_defconfig | 55 ---------------------------
6 files changed, 166 deletions(-)
delete mode 100644 board/radxa/rockpi-4/extlinux.conf
delete mode 100644 board/radxa/rockpi-4/genimage.cfg
delete mode 100755 board/radxa/rockpi-4/post-build.sh
delete mode 100644 board/radxa/rockpi-4/readme.txt
delete mode 100644 configs/rock_pi_4_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 591276bec8..bf839d32d5 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2731,10 +2731,8 @@ F: package/powertop/
N: Suniel Mahesh <sunil@amarulasolutions.com>
F: board/friendlyarm/nanopi-m4
F: board/pine64/rockpro64
-F: board/radxa/rockpi-4
F: board/radxa/rockpi-n8
F: board/radxa/rockpi-n10
-F: configs/rock_pi_4_defconfig
F: configs/rock_pi_n8_defconfig
F: configs/rock_pi_n10_defconfig
F: configs/rockpro64_defconfig
diff --git a/board/radxa/rockpi-4/extlinux.conf b/board/radxa/rockpi-4/extlinux.conf
deleted file mode 100644
index 83374f174a..0000000000
--- a/board/radxa/rockpi-4/extlinux.conf
+++ /dev/null
@@ -1,4 +0,0 @@
-label RK3399_ROCK_PI_4 linux
- kernel /Image
- devicetree /rk3399-rock-pi-4.dtb
- append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait
diff --git a/board/radxa/rockpi-4/genimage.cfg b/board/radxa/rockpi-4/genimage.cfg
deleted file mode 100644
index 9f64e96970..0000000000
--- a/board/radxa/rockpi-4/genimage.cfg
+++ /dev/null
@@ -1,39 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "rk3399-rock-pi-4.dtb",
- "extlinux"
- }
- }
-
- size = 112M
-}
-
-image sdcard.img {
- hdimage {
- partition-table-type = "gpt"
- }
-
- partition loader1 {
- image = "idbloader.img"
- offset = 32K
- }
-
- partition loader2 {
- image = "u-boot.itb"
- offset = 8M
- }
-
- partition boot {
- partition-type-uuid = F
- bootable = "true"
- image = "boot.vfat"
- offset = 16M
- }
-
- partition rootfs {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
- image = "rootfs.ext4"
- }
-}
diff --git a/board/radxa/rockpi-4/post-build.sh b/board/radxa/rockpi-4/post-build.sh
deleted file mode 100755
index ba29375c05..0000000000
--- a/board/radxa/rockpi-4/post-build.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
diff --git a/board/radxa/rockpi-4/readme.txt b/board/radxa/rockpi-4/readme.txt
deleted file mode 100644
index 1db7569ed9..0000000000
--- a/board/radxa/rockpi-4/readme.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-RADXA ROCK_PI_4
-================
-https://rockpi.org/rockpi4
-
-ROCK Pi 4 is a Single Board Computer (SBC) from radxa. This guide is valid
-for the below models:
-- ROCK PI 4 Model A
-- ROCK PI 4 Model B
-- ROCK PI 4 Model C
-
-Build:
-======
- $ make rock_pi_4_defconfig
- $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.elf
-├── boot.vfat
-├── extlinux
-├── idbloader.img
-├── Image
-├── rk3399-rock-pi-4.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-└── u-boot.itb
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device.
-
-Booting:
-========
-
-Serial console:
----------------
-RockPi4 has a 40-pin GPIO header. The pin layout is as follows:
-
-pin 6: gnd
-pin 8: tx
-pin 10: rx
-
-Baudrate for this board is 1500000.
-
-Login:
-------
-Enter 'root' as login user, and the prompt is ready.
-
-Wiki link:
-https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/rock-pi-4.html
diff --git a/configs/rock_pi_4_defconfig b/configs/rock_pi_4_defconfig
deleted file mode 100644
index 401a59bac4..0000000000
--- a/configs/rock_pi_4_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-# Architecture
-BR2_aarch64=y
-BR2_cortex_a72_a53=y
-
-# Linux headers same as kernel, a 5.4 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="cf2747360fdd1eb0d51dd01a984c7c62c7f714fe"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock-pi-4-rk3399"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.46"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-rock-pi-4"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_HOSTNAME="rockpi4"
-BR2_TARGET_GENERIC_ISSUE="Welcome to ROCK_PI_4"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_ROOTFS_EXT2_SIZE="96M"
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/radxa/rockpi-4/genimage.cfg"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/radxa/rockpi-4/post-build.sh"
--
2.38.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
next prev parent reply other threads:[~2022-11-02 20:19 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-02 20:18 [Buildroot] [PATCH 0/3] Another small set of defconfig removals Thomas Petazzoni via buildroot
2022-11-02 20:18 ` [Buildroot] [PATCH 1/3] configs/roc_pc_rk3399: remove defconfig Thomas Petazzoni via buildroot
2022-11-03 0:03 ` Da Xue
2022-11-03 10:56 ` Thomas Petazzoni via buildroot
2022-11-02 20:18 ` Thomas Petazzoni via buildroot [this message]
2022-11-02 20:18 ` [Buildroot] [PATCH 3/3] configs/rock_pi_n10: " Thomas Petazzoni via buildroot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221102201858.555294-3-thomas.petazzoni@bootlin.com \
--to=buildroot@buildroot.org \
--cc=sunil@amarulasolutions.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.