All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Derrick <jonathan.derrick@linux.dev>
To: Vidya Sagar <vidyas@nvidia.com>
Cc: "Manivannan Sadhasivam" <mani@kernel.org>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Bjorn Helgaas" <helgaas@kernel.org>,
	linux-pci@vger.kernel.org, "Lukas Wunner" <lukas@wunner.de>,
	"Pali Rohár" <pali@kernel.org>,
	"Jonathan Derrick" <jonathan.derrick@linux.dev>
Subject: [PATCH v2 5/7] PCI: pci-bridge-emul: Provide a helper to set behavior
Date: Thu, 10 Nov 2022 12:50:13 -0700	[thread overview]
Message-ID: <20221110195015.207-6-jonathan.derrick@linux.dev> (raw)
In-Reply-To: <20221110195015.207-1-jonathan.derrick@linux.dev>

Add a handler to set behavior of a PCI or PCIe register. Add the
appropriate enums to specify the register's Read-Only, Read-Write, and
Write-1-to-Clear behaviors.

Signed-off-by: Jonathan Derrick <jonathan.derrick@linux.dev>
---
 drivers/pci/pci-bridge-emul.c | 19 +++++++++++++++++++
 drivers/pci/pci-bridge-emul.h | 10 ++++++++++
 2 files changed, 29 insertions(+)

diff --git a/drivers/pci/pci-bridge-emul.c b/drivers/pci/pci-bridge-emul.c
index 9334b2dd4764..3c1a683ece66 100644
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -46,6 +46,25 @@ struct pci_bridge_reg_behavior {
 	u32 w1c;
 };
 
+void pci_bridge_emul_set_reg_behavior(struct pci_bridge_emul *bridge,
+				      bool pcie, int reg, u32 val,
+				      enum pci_bridge_emul_reg_behavior type)
+{
+	struct pci_bridge_reg_behavior *behavior;
+
+	if (pcie)
+		behavior = &bridge->pcie_cap_regs_behavior[reg / 4];
+	else
+		behavior = &bridge->pci_regs_behavior[reg / 4];
+
+	if (type == PCI_BRIDGE_EMUL_REG_BEHAVIOR_RO)
+		behavior->ro = val;
+	else if (type == PCI_BRIDGE_EMUL_REG_BEHAVIOR_RW)
+		behavior->rw = val;
+	else /* PCI_BRIDGE_EMUL_REG_BEHAVIOR_W1C */
+		behavior->w1c = val;
+}
+
 static const
 struct pci_bridge_reg_behavior pci_regs_behavior[PCI_STD_HEADER_SIZEOF / 4] = {
 	[PCI_VENDOR_ID / 4] = { .ro = ~0 },
diff --git a/drivers/pci/pci-bridge-emul.h b/drivers/pci/pci-bridge-emul.h
index 2a0e59c7f0d9..b2401d58518c 100644
--- a/drivers/pci/pci-bridge-emul.h
+++ b/drivers/pci/pci-bridge-emul.h
@@ -72,6 +72,12 @@ struct pci_bridge_emul;
 typedef enum { PCI_BRIDGE_EMUL_HANDLED,
 	       PCI_BRIDGE_EMUL_NOT_HANDLED } pci_bridge_emul_read_status_t;
 
+enum pci_bridge_emul_reg_behavior {
+	PCI_BRIDGE_EMUL_REG_BEHAVIOR_RO,
+	PCI_BRIDGE_EMUL_REG_BEHAVIOR_RW,
+	PCI_BRIDGE_EMUL_REG_BEHAVIOR_W1C,
+};
+
 struct pci_bridge_emul_ops {
 	/*
 	 * Called when reading from the regular PCI bridge
@@ -161,4 +167,8 @@ int pci_bridge_emul_conf_read(struct pci_bridge_emul *bridge, int where,
 int pci_bridge_emul_conf_write(struct pci_bridge_emul *bridge, int where,
 			       int size, u32 value);
 
+void pci_bridge_emul_set_reg_behavior(struct pci_bridge_emul *bridge,
+				      bool pcie, int reg, u32 val,
+				      enum pci_bridge_emul_reg_behavior type);
+
 #endif /* __PCI_BRIDGE_EMUL_H__ */
-- 
2.30.2


  parent reply	other threads:[~2022-11-10 19:53 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-10 19:50 [PATCH v2 0/7] PCIe Hotplug Slot Emulation driver Jonathan Derrick
2022-11-10 19:50 ` [PATCH v2 1/7] PCI: Allow for indirecting capability registers Jonathan Derrick
2022-11-10 21:10   ` Pali Rohár
2022-11-10 19:50 ` [PATCH v2 2/7] PCI: Add pcie_port_slot_emulated stub Jonathan Derrick
2022-11-10 19:50 ` [PATCH v2 3/7] PCI: pciehp: Expose the poll loop to other drivers Jonathan Derrick
2022-11-10 19:50 ` [PATCH v2 4/7] PCI: Move pci_dev_str_match to search.c Jonathan Derrick
2022-11-10 19:50 ` Jonathan Derrick [this message]
2022-11-10 21:02   ` [PATCH v2 5/7] PCI: pci-bridge-emul: Provide a helper to set behavior Pali Rohár
2022-11-10 19:50 ` [PATCH v2 6/7] PCI: pciehp: Add hotplug slot emulation driver Jonathan Derrick
2022-11-10 19:50 ` [PATCH v2 7/7] PCI: pciehp: Wire up pcie_port_emulate_slot and Jonathan Derrick
2022-11-10 21:17 ` [PATCH v2 0/7] PCIe Hotplug Slot Emulation driver Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221110195015.207-6-jonathan.derrick@linux.dev \
    --to=jonathan.derrick@linux.dev \
    --cc=helgaas@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=lukas@wunner.de \
    --cc=mani@kernel.org \
    --cc=pali@kernel.org \
    --cc=vidyas@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.