From: Tim Harvey <tharvey@gateworks.com>
To: Stefano Babic <sbabic@denx.de>,
Fabio Estevam <festevam@gmail.com>,
"NXP i . MX U-Boot Team" <uboot-imx@nxp.com>,
u-boot@lists.denx.de
Cc: Tim Harvey <tharvey@gateworks.com>
Subject: [PATCH] arm64: dts: imx8m{m, n}-venice-gw7902: add gpio pins for new board revision
Date: Fri, 11 Nov 2022 07:55:46 -0800 [thread overview]
Message-ID: <20221111155546.1684070-1-tharvey@gateworks.com> (raw)
Add gpio pins present on new board revision:
* LTE modem support (imx8mm-gw7902 only)
- lte_pwr#
- lte_rst
- lte_int
* M2 power enable
- m2_pwr_en
* off-board 4.0V supply
- vdd_4p0_en
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm/dts/imx8mm-venice-gw7902-u-boot.dtsi | 14 ++++++++++++++
arch/arm/dts/imx8mm-venice-gw7902.dts | 12 ++++++++----
arch/arm/dts/imx8mn-venice-gw7902-u-boot.dtsi | 14 ++++++++++++++
arch/arm/dts/imx8mn-venice-gw7902.dts | 8 ++++----
4 files changed, 40 insertions(+), 8 deletions(-)
diff --git a/arch/arm/dts/imx8mm-venice-gw7902-u-boot.dtsi b/arch/arm/dts/imx8mm-venice-gw7902-u-boot.dtsi
index f21e46b12dd7..d58a7d14b631 100644
--- a/arch/arm/dts/imx8mm-venice-gw7902-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-venice-gw7902-u-boot.dtsi
@@ -6,6 +6,13 @@
#include "imx8mm-venice-u-boot.dtsi"
&gpio1 {
+ m2pwren {
+ gpio-hog;
+ output-low;
+ gpios = <8 GPIO_ACTIVE_HIGH>;
+ line-name = "m2_pwren";
+ };
+
m2rst {
gpio-hog;
output-low;
@@ -96,6 +103,13 @@
line-name = "app_gpio1";
};
+ vdd4p0en {
+ gpio-hog;
+ output-low;
+ gpios = <22 GPIO_ACTIVE_HIGH>;
+ line-name = "vdd_4p0_en";
+ };
+
uart1rs485 {
gpio-hog;
output-low;
diff --git a/arch/arm/dts/imx8mm-venice-gw7902.dts b/arch/arm/dts/imx8mm-venice-gw7902.dts
index 31f4c735fe4f..921bffae0cc9 100644
--- a/arch/arm/dts/imx8mm-venice-gw7902.dts
+++ b/arch/arm/dts/imx8mm-venice-gw7902.dts
@@ -261,7 +261,7 @@
&gpio1 {
gpio-line-names = "", "", "", "", "", "", "", "",
- "", "", "", "", "", "m2_reset", "", "m2_wdis#",
+ "m2_pwr_en", "", "", "", "", "m2_reset", "", "m2_wdis#",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
@@ -283,7 +283,8 @@
&gpio4 {
gpio-line-names = "", "", "", "", "", "", "", "",
"", "", "", "amp_gpio3", "amp_gpio2", "", "amp_gpio1", "",
- "", "", "", "", "amp_gpio4", "app_gpio1", "", "uart1_rs485",
+ "lte_pwr#", "lte_rst", "lte_int", "",
+ "amp_gpio4", "app_gpio1", "vdd_4p0_en", "uart1_rs485",
"", "uart1_term", "uart1_half", "app_gpio2",
"mipi_gpio1", "", "", "";
};
@@ -738,14 +739,19 @@
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */
+ MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x40000041 /* M2_PWR_EN */
MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RESET */
MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */
+ MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x40000041 /* LTE_INT */
+ MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x40000041 /* LTE_RST# */
+ MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x40000041 /* LTE_PWR */
MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000041 /* AMP GPIO1 */
MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x40000041 /* AMP GPIO2 */
MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x40000041 /* AMP GPIO3 */
MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x40000041 /* AMP_GPIO4 */
MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */
+ MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x40000041 /* VDD_4P0_EN */
MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* APP GPIO2 */
MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* UART2_EN# */
MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x40000041 /* MIPI_GPIO1 */
@@ -779,8 +785,6 @@
MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* RST# */
MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 /* IRQ# */
- MX8MM_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x141
- MX8MM_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x141
>;
};
diff --git a/arch/arm/dts/imx8mn-venice-gw7902-u-boot.dtsi b/arch/arm/dts/imx8mn-venice-gw7902-u-boot.dtsi
index 17e6828c79f8..10656ce903a5 100644
--- a/arch/arm/dts/imx8mn-venice-gw7902-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-venice-gw7902-u-boot.dtsi
@@ -6,6 +6,13 @@
#include "imx8mn-venice-u-boot.dtsi"
&gpio1 {
+ m2pwren {
+ gpio-hog;
+ output-low;
+ gpios = <8 GPIO_ACTIVE_HIGH>;
+ line-name = "m2_pwren";
+ };
+
m2rst {
gpio-hog;
output-low;
@@ -54,6 +61,13 @@
line-name = "app_gpio1";
};
+ vdd4p0en {
+ gpio-hog;
+ output-low;
+ gpios = <22 GPIO_ACTIVE_HIGH>;
+ line-name = "vdd_4p0_en";
+ };
+
uart1rs485 {
gpio-hog;
output-low;
diff --git a/arch/arm/dts/imx8mn-venice-gw7902.dts b/arch/arm/dts/imx8mn-venice-gw7902.dts
index dd4302ac1de4..029ccdbee7d5 100644
--- a/arch/arm/dts/imx8mn-venice-gw7902.dts
+++ b/arch/arm/dts/imx8mn-venice-gw7902.dts
@@ -256,7 +256,7 @@
&gpio1 {
gpio-line-names = "", "", "", "", "", "", "", "",
- "", "", "", "", "", "m2_reset", "", "m2_wdis#",
+ "m2_pwr_en", "", "", "", "", "m2_reset", "", "m2_wdis#",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
@@ -278,7 +278,7 @@
&gpio4 {
gpio-line-names = "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
- "", "", "", "", "", "app_gpio1", "", "uart1_rs485",
+ "", "", "", "", "", "app_gpio1", "vdd_4p0_en", "uart1_rs485",
"", "uart1_term", "uart1_half", "app_gpio2",
"mipi_gpio1", "", "", "";
};
@@ -689,10 +689,12 @@
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */
+ MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x40000041 /* M2_PWR_EN */
MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RESET */
MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */
MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */
MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */
+ MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x40000041 /* VDD_4P0_EN */
MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* APP GPIO2 */
MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* UART2_EN# */
MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x40000041 /* MIPI_GPIO1 */
@@ -726,8 +728,6 @@
MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* RST# */
MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 /* IRQ# */
- MX8MN_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x141
- MX8MN_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x141
>;
};
--
2.25.1
next reply other threads:[~2022-11-11 15:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-11 15:55 Tim Harvey [this message]
2023-01-31 20:34 ` [PATCH] arm64: dts: imx8m{m, n}-venice-gw7902: add gpio pins for new board revision sbabic
-- strict thread matches above, loose matches on Subject: below --
2022-11-07 18:17 [PATCH] arm64: dts: imx8m{m,n}-venice-gw7902: " Tim Harvey
2022-11-07 18:17 ` Tim Harvey
2022-11-11 7:10 ` Shawn Guo
2022-11-11 7:10 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221111155546.1684070-1-tharvey@gateworks.com \
--to=tharvey@gateworks.com \
--cc=festevam@gmail.com \
--cc=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.