From: Corentin Labbe <clabbe@baylibre.com>
To: gregkh@linuxfoundation.org, johan@kernel.org
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
Corentin Labbe <clabbe@baylibre.com>
Subject: [PATCH v3 0/2] usb: serial: add support for CH348
Date: Mon, 14 Nov 2022 07:37:34 +0000 [thread overview]
Message-ID: <20221114073736.672194-1-clabbe@baylibre.com> (raw)
Hello
The CH348 is an octo serial to USB adapter.
The following patch adds a driver for supporting it.
Since there is no public datasheet, unfortunatly it remains some magic values.
It was tested with a large range of baud from 1200 to 1500000 and used with
success in one of our kernel CI testlab.
Regards
Changes since v1:
- use a data structure for encoding/decoding messages.
- check if needed endpoints exists
- fix URB leak in ch348_allocate_status_read error case
- test for maximum baud rate as stated by datasheet
Changes since v2:
- specify ch348_rxbuf data length
- Use correct speed_t dwDTERate instead of __le32
- test for maximum baud rate supported according to datasheet
- Use a define for CH348_TX_HDRSIZE
Corentin Labbe (2):
usb: serial: add support for CH348
usb: serial: add myself as maintainer of CH348
MAINTAINERS | 5 +
drivers/usb/serial/Kconfig | 9 +
drivers/usb/serial/Makefile | 1 +
drivers/usb/serial/ch348.c | 739 ++++++++++++++++++++++++++++++++++++
4 files changed, 754 insertions(+)
create mode 100644 drivers/usb/serial/ch348.c
--
2.37.4
next reply other threads:[~2022-11-14 7:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-14 7:37 Corentin Labbe [this message]
2022-11-14 7:37 ` [PATCH v3 1/2] usb: serial: add support for CH348 Corentin Labbe
2022-11-22 16:06 ` Nicolas Frattaroli
2022-11-25 13:34 ` Johan Hovold
2022-12-09 14:18 ` Corentin LABBE
2022-11-14 7:37 ` [PATCH v3 2/2] usb: serial: add myself as maintainer of CH348 Corentin Labbe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221114073736.672194-1-clabbe@baylibre.com \
--to=clabbe@baylibre.com \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.