[PATCH 3/6] lpfc: Fix MI capability display in cmf_info sysfs attribute

[Justin Tee <justintee8345@gmail.com>]

The dynamic mi_ver value holds the currently configured MI setting.  mi_ver
was being displayed as part of the cmf_info sysfs attribute, when the
output string meant to display MI capabilities instead.

Add a mi_cap member in the lpfc_pc_sli4_params structure that will store
MI capabilities during initialization so that cmf_info prints out
capabilities instead of current configuration.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
---
 drivers/scsi/lpfc/lpfc_attr.c | 2 +-
 drivers/scsi/lpfc/lpfc_init.c | 3 +++
 drivers/scsi/lpfc/lpfc_sli4.h | 1 +
 3 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 030ad1d59cbd..77e1b2911cb4 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -134,7 +134,7 @@ lpfc_cmf_info_show(struct device *dev, struct device_attribute *attr,
 	scnprintf(tmp, sizeof(tmp),
 		  "Congestion Mgmt Info: E2Eattr %d Ver %d "
 		  "CMF %d cnt %d\n",
-		  phba->sli4_hba.pc_sli4_params.mi_ver,
+		  phba->sli4_hba.pc_sli4_params.mi_cap,
 		  cp ? cp->cgn_info_version : 0,
 		  phba->sli4_hba.pc_sli4_params.cmf, phba->cmf_timer_cnt);
 
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index a6e32ecd4151..a119c06742b8 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -699,6 +699,8 @@ lpfc_sli4_refresh_params(struct lpfc_hba *phba)
 		return rc;
 	}
 	mbx_sli4_parameters = &mqe->un.get_sli4_parameters.sli4_parameters;
+	phba->sli4_hba.pc_sli4_params.mi_cap =
+		bf_get(cfg_mi_ver, mbx_sli4_parameters);
 
 	/* Are we forcing MI off via module parameter? */
 	if (phba->cfg_enable_mi)
@@ -13839,6 +13841,7 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 					   mbx_sli4_parameters);
 	phba->sli4_hba.extents_in_use = bf_get(cfg_ext, mbx_sli4_parameters);
 	phba->sli4_hba.rpi_hdrs_in_use = bf_get(cfg_hdrr, mbx_sli4_parameters);
+	sli4_params->mi_cap = bf_get(cfg_mi_ver, mbx_sli4_parameters);
 
 	/* Check for Extended Pre-Registered SGL support */
 	phba->cfg_xpsgl = bf_get(cfg_xpsgl, mbx_sli4_parameters);
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index cbb1aa1cf025..f927c2a25d54 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -556,6 +556,7 @@ struct lpfc_pc_sli4_params {
 #define LPFC_MIB3_SUPPORT	3
 	uint16_t mi_value;
 #define LPFC_DFLT_MIB_VAL	2
+	uint8_t mi_cap;
 	uint8_t mib_bde_cnt;
 	uint8_t cmf;
 	uint8_t cqv;
-- 
2.38.0