[PATCH 1/2] regulator: dt-bindings: qcom,rpmh: clean up example indentation

[Johan Hovold <johan+linaro@kernel.org>]

Remove a line break and increase indentation of the continuation line
to avoid having the 'regulator-allowed-modes' example be reproduced
verbatim with four-spaces indentation (instead of a tab, which is still
too little) in devicetree sources.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 .../bindings/regulator/qcom,rpmh-regulator.yaml        | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index 90c3bda31c23..7ff51b558702 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -412,9 +412,8 @@ examples:
             regulator-min-microvolt = <1800000>;
             regulator-max-microvolt = <1800000>;
             regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-            regulator-allowed-modes =
-                <RPMH_REGULATOR_MODE_LPM
-                 RPMH_REGULATOR_MODE_HPM>;
+            regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                       RPMH_REGULATOR_MODE_HPM>;
             regulator-allow-set-load;
         };
 
@@ -431,9 +430,8 @@ examples:
         bob {
             regulator-min-microvolt = <3312000>;
             regulator-max-microvolt = <3600000>;
-            regulator-allowed-modes =
-                <RPMH_REGULATOR_MODE_AUTO
-                 RPMH_REGULATOR_MODE_HPM>;
+            regulator-allowed-modes = <RPMH_REGULATOR_MODE_AUTO
+                                       RPMH_REGULATOR_MODE_HPM>;
             regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
         };
     };
-- 
2.37.4