From: <ye.xingchen@zte.com.cn>
To: <dmitry.torokhov@gmail.com>
Cc: <colin.i.king@gmail.com>, <linux-input@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH] Input: misc: use sysfs_emit() to instead of scnprintf()
Date: Thu, 1 Dec 2022 15:48:38 +0800 (CST) [thread overview]
Message-ID: <202212011548387254492@zte.com.cn> (raw)
From: ye xingchen <ye.xingchen@zte.com.cn>
Replace the open-code with sysfs_emit() to simplify the code.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
---
drivers/input/misc/ims-pcu.c | 10 +++++-----
drivers/input/misc/iqs269a.c | 18 +++++++++---------
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c
index b2f1292e27ef..6e8cc28debd9 100644
--- a/drivers/input/misc/ims-pcu.c
+++ b/drivers/input/misc/ims-pcu.c
@@ -1050,7 +1050,7 @@ static ssize_t ims_pcu_attribute_show(struct device *dev,
container_of(dattr, struct ims_pcu_attribute, dattr);
char *field = (char *)pcu + attr->field_offset;
- return scnprintf(buf, PAGE_SIZE, "%.*s\n", attr->field_length, field);
+ return sysfs_emit(buf, "%.*s\n", attr->field_length, field);
}
static ssize_t ims_pcu_attribute_store(struct device *dev,
@@ -1206,7 +1206,7 @@ ims_pcu_update_firmware_status_show(struct device *dev,
struct usb_interface *intf = to_usb_interface(dev);
struct ims_pcu *pcu = usb_get_intfdata(intf);
- return scnprintf(buf, PAGE_SIZE, "%d\n", pcu->update_firmware_status);
+ return sysfs_emit(buf, "%d\n", pcu->update_firmware_status);
}
static DEVICE_ATTR(update_firmware_status, S_IRUGO,
@@ -1309,7 +1309,7 @@ static ssize_t ims_pcu_ofn_reg_data_show(struct device *dev,
if (error)
return error;
- return scnprintf(buf, PAGE_SIZE, "%x\n", data);
+ return sysfs_emit(buf, "%x\n", data);
}
static ssize_t ims_pcu_ofn_reg_data_store(struct device *dev,
@@ -1344,7 +1344,7 @@ static ssize_t ims_pcu_ofn_reg_addr_show(struct device *dev,
int error;
mutex_lock(&pcu->cmd_mutex);
- error = scnprintf(buf, PAGE_SIZE, "%x\n", pcu->ofn_reg_addr);
+ error = sysfs_emit(buf, "%x\n", pcu->ofn_reg_addr);
mutex_unlock(&pcu->cmd_mutex);
return error;
@@ -1397,7 +1397,7 @@ static ssize_t ims_pcu_ofn_bit_show(struct device *dev,
if (error)
return error;
- return scnprintf(buf, PAGE_SIZE, "%d\n", !!(data & (1 << attr->nr)));
+ return sysfs_emit(buf, "%d\n", !!(data & (1 << attr->nr)));
}
static ssize_t ims_pcu_ofn_bit_store(struct device *dev,
diff --git a/drivers/input/misc/iqs269a.c b/drivers/input/misc/iqs269a.c
index a348247d3d38..e4d5cea51f39 100644
--- a/drivers/input/misc/iqs269a.c
+++ b/drivers/input/misc/iqs269a.c
@@ -1332,7 +1332,7 @@ static ssize_t counts_show(struct device *dev,
if (error)
return error;
- return scnprintf(buf, PAGE_SIZE, "%u\n", le16_to_cpu(counts));
+ return sysfs_emit(buf, "%u\n", le16_to_cpu(counts));
}
static ssize_t hall_bin_show(struct device *dev,
@@ -1369,7 +1369,7 @@ static ssize_t hall_bin_show(struct device *dev,
return -EINVAL;
}
- return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+ return sysfs_emit(buf, "%u\n", val);
}
static ssize_t hall_enable_show(struct device *dev,
@@ -1377,7 +1377,7 @@ static ssize_t hall_enable_show(struct device *dev,
{
struct iqs269_private *iqs269 = dev_get_drvdata(dev);
- return scnprintf(buf, PAGE_SIZE, "%u\n", iqs269->hall_enable);
+ return sysfs_emit(buf, "%u\n", iqs269->hall_enable);
}
static ssize_t hall_enable_store(struct device *dev,
@@ -1407,7 +1407,7 @@ static ssize_t ch_number_show(struct device *dev,
{
struct iqs269_private *iqs269 = dev_get_drvdata(dev);
- return scnprintf(buf, PAGE_SIZE, "%u\n", iqs269->ch_num);
+ return sysfs_emit(buf, "%u\n", iqs269->ch_num);
}
static ssize_t ch_number_store(struct device *dev,
@@ -1435,7 +1435,7 @@ static ssize_t rx_enable_show(struct device *dev,
{
struct iqs269_private *iqs269 = dev_get_drvdata(dev);
- return scnprintf(buf, PAGE_SIZE, "%u\n",
+ return sysfs_emit(buf, "%u\n",
iqs269->ch_reg[iqs269->ch_num].rx_enable);
}
@@ -1475,7 +1475,7 @@ static ssize_t ati_mode_show(struct device *dev,
if (error)
return error;
- return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+ return sysfs_emit(buf, "%u\n", val);
}
static ssize_t ati_mode_store(struct device *dev,
@@ -1508,7 +1508,7 @@ static ssize_t ati_base_show(struct device *dev,
if (error)
return error;
- return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+ return sysfs_emit(buf, "%u\n", val);
}
static ssize_t ati_base_store(struct device *dev,
@@ -1541,7 +1541,7 @@ static ssize_t ati_target_show(struct device *dev,
if (error)
return error;
- return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+ return sysfs_emit(buf, "%u\n", val);
}
static ssize_t ati_target_store(struct device *dev,
@@ -1568,7 +1568,7 @@ static ssize_t ati_trigger_show(struct device *dev,
{
struct iqs269_private *iqs269 = dev_get_drvdata(dev);
- return scnprintf(buf, PAGE_SIZE, "%u\n", iqs269->ati_current);
+ return sysfs_emit(buf, "%u\n", iqs269->ati_current);
}
static ssize_t ati_trigger_store(struct device *dev,
--
2.25.1
next reply other threads:[~2022-12-01 7:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-01 7:48 ye.xingchen [this message]
2022-12-01 16:50 ` [PATCH] Input: misc: use sysfs_emit() to instead of scnprintf() Jeff LaBundy
2023-12-13 6:57 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202212011548387254492@zte.com.cn \
--to=ye.xingchen@zte.com.cn \
--cc=colin.i.king@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.