[PATCH 08/16] clk: qcom: smd-rpm: drop the rpm_status_id field

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

The rpm_status_id field is a leftover from the non-SMD clocks. It is of
no use for the SMD-RPM clock driver and is always equal to zero. Drop it
completely.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/clk-smd-rpm.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index e52e0e242294..828cae6769f9 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -25,13 +25,11 @@
 #define QCOM_RPM_SMD_KEY_STATE				0x54415453
 #define QCOM_RPM_SCALING_ENABLE_ID			0x2
 
-#define __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, stat_id,  \
-			     key)					      \
+#define __DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id, key)      \
 	static struct clk_smd_rpm _platform##_##_active;		      \
 	static struct clk_smd_rpm _platform##_##_name = {		      \
 		.rpm_res_type = (type),					      \
 		.rpm_clk_id = (r_id),					      \
-		.rpm_status_id = (stat_id),				      \
 		.rpm_key = (key),					      \
 		.peer = &_platform##_##_active,				      \
 		.rate = INT_MAX,					      \
@@ -48,7 +46,6 @@
 	static struct clk_smd_rpm _platform##_##_active = {		      \
 		.rpm_res_type = (type),					      \
 		.rpm_clk_id = (r_id),					      \
-		.rpm_status_id = (stat_id),				      \
 		.active_only = true,					      \
 		.rpm_key = (key),					      \
 		.peer = &_platform##_##_name,				      \
@@ -65,12 +62,11 @@
 	}
 
 #define __DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id,    \
-				    stat_id, r, key)			      \
+				    r, key)			      \
 	static struct clk_smd_rpm _platform##_##_active;		      \
 	static struct clk_smd_rpm _platform##_##_name = {		      \
 		.rpm_res_type = (type),					      \
 		.rpm_clk_id = (r_id),					      \
-		.rpm_status_id = (stat_id),				      \
 		.rpm_key = (key),					      \
 		.branch = true,						      \
 		.peer = &_platform##_##_active,				      \
@@ -88,7 +84,6 @@
 	static struct clk_smd_rpm _platform##_##_active = {		      \
 		.rpm_res_type = (type),					      \
 		.rpm_clk_id = (r_id),					      \
-		.rpm_status_id = (stat_id),				      \
 		.active_only = true,					      \
 		.rpm_key = (key),					      \
 		.branch = true,						      \
@@ -107,19 +102,19 @@
 
 #define DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id)	      \
 		__DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id,   \
-		0, QCOM_RPM_SMD_KEY_RATE)
+		QCOM_RPM_SMD_KEY_RATE)
 
 #define DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type, r_id, r)   \
 		__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active, type,  \
-		r_id, 0, r, QCOM_RPM_SMD_KEY_ENABLE)
+		r_id, r, QCOM_RPM_SMD_KEY_ENABLE)
 
 #define DEFINE_CLK_SMD_RPM_QDSS(_platform, _name, _active, type, r_id)	      \
 		__DEFINE_CLK_SMD_RPM(_platform, _name, _active, type, r_id,   \
-		0, QCOM_RPM_SMD_KEY_STATE)
+		QCOM_RPM_SMD_KEY_STATE)
 
 #define DEFINE_CLK_SMD_RPM_XO_BUFFER(_platform, _name, _active, r_id, r)      \
 		__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active,	      \
-		QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, r,			      \
+		QCOM_SMD_RPM_CLK_BUF_A, r_id, r,			      \
 		QCOM_RPM_KEY_SOFTWARE_ENABLE)
 
 #define DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(_platform, _name, _active,	      \
@@ -128,7 +123,7 @@
 					     r_id, r);			      \
 		__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name##_pin,	      \
 		_active##_pin,						      \
-		QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, r,			      \
+		QCOM_SMD_RPM_CLK_BUF_A, r_id, r,			      \
 		QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY)
 
 #define to_clk_smd_rpm(_hw) container_of(_hw, struct clk_smd_rpm, hw)
@@ -137,7 +132,6 @@ struct clk_smd_rpm {
 	const int rpm_res_type;
 	const int rpm_key;
 	const int rpm_clk_id;
-	const int rpm_status_id;
 	const bool active_only;
 	bool enabled;
 	bool branch;
-- 
2.35.1