[PATCH v2 5/6] x86/hyperv: Support hypercalls for TDX guests

[Dexuan Cui <decui@microsoft.com>]

A TDX guest uses the GHCI call rather than hv_hypercall_pg.

In hv_do_hypercall(), Hyper-V requires that the input/output addresses
must have the cc_mask.

Signed-off-by: Dexuan Cui <decui@microsoft.com>

---

Changes in v2:
  Implemented hv_tdx_hypercall() in C rather than in assembly code.
  Renamed the parameter names of hv_tdx_hypercall().
  Used cc_mkdec() directly in hv_do_hypercall().

 arch/x86/hyperv/hv_init.c       |  8 ++++++++
 arch/x86/hyperv/ivm.c           | 14 ++++++++++++++
 arch/x86/include/asm/mshyperv.h | 17 +++++++++++++++++
 3 files changed, 39 insertions(+)

diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index a823fde1ad7f..c0ba53ad8b8e 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -430,6 +430,10 @@ void __init hyperv_init(void)
 	/* Hyper-V requires to write guest os id via ghcb in SNP IVM. */
 	hv_ghcb_msr_write(HV_X64_MSR_GUEST_OS_ID, guest_id);
 
+	/* A TDX guest uses the GHCI call rather than hv_hypercall_pg. */
+	if (hv_isolation_type_tdx())
+		goto skip_hypercall_pg_init;
+
 	hv_hypercall_pg = __vmalloc_node_range(PAGE_SIZE, 1, VMALLOC_START,
 			VMALLOC_END, GFP_KERNEL, PAGE_KERNEL_ROX,
 			VM_FLUSH_RESET_PERMS, NUMA_NO_NODE,
@@ -469,6 +473,7 @@ void __init hyperv_init(void)
 		wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
 	}
 
+skip_hypercall_pg_init:
 	/*
 	 * hyperv_init() is called before LAPIC is initialized: see
 	 * apic_intr_mode_init() -> x86_platform.apic_post_init() and
@@ -604,6 +609,9 @@ bool hv_is_hyperv_initialized(void)
 	if (x86_hyper_type != X86_HYPER_MS_HYPERV)
 		return false;
 
+	/* A TDX guest uses the GHCI call rather than hv_hypercall_pg. */
+	if (hv_isolation_type_tdx())
+		return true;
 	/*
 	 * Verify that earlier initialization succeeded by checking
 	 * that the hypercall page is setup
diff --git a/arch/x86/hyperv/ivm.c b/arch/x86/hyperv/ivm.c
index 13ccb52eecd7..07e4253b5809 100644
--- a/arch/x86/hyperv/ivm.c
+++ b/arch/x86/hyperv/ivm.c
@@ -276,6 +276,20 @@ bool hv_isolation_type_tdx(void)
 {
 	return static_branch_unlikely(&isolation_type_tdx);
 }
+
+u64 hv_tdx_hypercall(u64 control, u64 param1, u64 param2)
+{
+	struct tdx_hypercall_args args = { };
+
+	args.r10 = control;
+	args.rdx = param1;
+	args.r8  = param2;
+
+	(void)__tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT);
+
+	return args.r11;
+}
+EXPORT_SYMBOL_GPL(hv_tdx_hypercall);
 #endif
 
 /*
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 8a2cafec4675..a4d665472d9e 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -10,6 +10,7 @@
 #include <asm/nospec-branch.h>
 #include <asm/paravirt.h>
 #include <asm/mshyperv.h>
+#include <asm/coco.h>
 
 union hv_ghcb;
 
@@ -39,6 +40,12 @@ int hv_call_deposit_pages(int node, u64 partition_id, u32 num_pages);
 int hv_call_add_logical_proc(int node, u32 lp_index, u32 acpi_id);
 int hv_call_create_vp(int node, u64 partition_id, u32 vp_index, u32 flags);
 
+u64 hv_tdx_hypercall(u64 control, u64 param1, u64 param2);
+
+/*
+ * If the hypercall involves no input or output parameters, the hypervisor
+ * ignores the corresponding GPA pointer.
+ */
 static inline u64 hv_do_hypercall(u64 control, void *input, void *output)
 {
 	u64 input_address = input ? virt_to_phys(input) : 0;
@@ -46,6 +53,10 @@ static inline u64 hv_do_hypercall(u64 control, void *input, void *output)
 	u64 hv_status;
 
 #ifdef CONFIG_X86_64
+	if (hv_isolation_type_tdx())
+		return hv_tdx_hypercall(control,
+					cc_mkdec(input_address),
+					cc_mkdec(output_address));
 	if (!hv_hypercall_pg)
 		return U64_MAX;
 
@@ -83,6 +94,9 @@ static inline u64 hv_do_fast_hypercall8(u16 code, u64 input1)
 	u64 hv_status, control = (u64)code | HV_HYPERCALL_FAST_BIT;
 
 #ifdef CONFIG_X86_64
+	if (hv_isolation_type_tdx())
+		return hv_tdx_hypercall(control, input1, 0);
+
 	{
 		__asm__ __volatile__(CALL_NOSPEC
 				     : "=a" (hv_status), ASM_CALL_CONSTRAINT,
@@ -114,6 +128,9 @@ static inline u64 hv_do_fast_hypercall16(u16 code, u64 input1, u64 input2)
 	u64 hv_status, control = (u64)code | HV_HYPERCALL_FAST_BIT;
 
 #ifdef CONFIG_X86_64
+	if (hv_isolation_type_tdx())
+		return hv_tdx_hypercall(control, input1, input2);
+
 	{
 		__asm__ __volatile__("mov %4, %%r8\n"
 				     CALL_NOSPEC
-- 
2.25.1