All of lore.kernel.org
 help / color / mirror / Atom feed
From: Leonard Anderweit <leonard.anderweit@gmail.com>
To: linux-hwmon@vger.kernel.org
Cc: Aleksa Savic <savicaleksa83@gmail.com>,
	Jack Doan <me@jackdoan.com>, Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Jonathan Corbet <corbet@lwn.net>,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Leonard Anderweit <leonard.anderweit@gmail.com>
Subject: [PATCH 1/6] hwmon: (aquacomputer_d5next) Rename AQC_TEMP_SENSOR_SIZE to AQC_SENSOR_SIZE
Date: Sun, 18 Dec 2022 12:31:26 +0100	[thread overview]
Message-ID: <20221218113131.3752-2-leonard.anderweit@gmail.com> (raw)
In-Reply-To: <20221218113131.3752-1-leonard.anderweit@gmail.com>

Rename AQC_TEMP_SENSOR_SIZE to AQC_SENSOR_SIZE to use with other sensor
types.

Signed-off-by: Leonard Anderweit <leonard.anderweit@gmail.com>
---
 drivers/hwmon/aquacomputer_d5next.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
index 9cc10080160b..8fd9f7fd7ec4 100644
--- a/drivers/hwmon/aquacomputer_d5next.c
+++ b/drivers/hwmon/aquacomputer_d5next.c
@@ -60,7 +60,7 @@ static u8 secondary_ctrl_report[] = {
 };
 
 /* Sensor sizes and offsets for all Aquacomputer devices */
-#define AQC_TEMP_SENSOR_SIZE		0x02
+#define AQC_SENSOR_SIZE			0x02
 #define AQC_TEMP_SENSOR_DISCONNECTED	0x7FFF
 #define AQC_FAN_PERCENT_OFFSET		0x00
 #define AQC_FAN_VOLTAGE_OFFSET		0x02
@@ -557,7 +557,7 @@ static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 		case hwmon_temp_offset:
 			ret =
 			    aqc_get_ctrl_val(priv, priv->temp_ctrl_offset +
-					     channel * AQC_TEMP_SENSOR_SIZE, val);
+					     channel * AQC_SENSOR_SIZE, val);
 			if (ret < 0)
 				return ret;
 
@@ -651,7 +651,7 @@ static int aqc_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 			val = clamp_val(val, -15000, 15000) / 10;
 			ret =
 			    aqc_set_ctrl_val(priv, priv->temp_ctrl_offset +
-					     channel * AQC_TEMP_SENSOR_SIZE, val);
+					     channel * AQC_SENSOR_SIZE, val);
 			if (ret < 0)
 				return ret;
 			break;
@@ -797,7 +797,7 @@ static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8
 	for (i = 0; i < priv->num_temp_sensors; i++) {
 		sensor_value = get_unaligned_be16(data +
 						  priv->temp_sensor_start_offset +
-						  i * AQC_TEMP_SENSOR_SIZE);
+						  i * AQC_SENSOR_SIZE);
 		if (sensor_value == AQC_TEMP_SENSOR_DISCONNECTED)
 			priv->temp_input[i] = -ENODATA;
 		else
@@ -808,7 +808,7 @@ static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8
 	for (j = 0; j < priv->num_virtual_temp_sensors; j++) {
 		sensor_value = get_unaligned_be16(data +
 						  priv->virtual_temp_sensor_start_offset +
-						  j * AQC_TEMP_SENSOR_SIZE);
+						  j * AQC_SENSOR_SIZE);
 		if (sensor_value == AQC_TEMP_SENSOR_DISCONNECTED)
 			priv->temp_input[i] = -ENODATA;
 		else
-- 
2.38.1


  reply	other threads:[~2022-12-18 11:32 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-18 11:31 [PATCH 0/6] hwmon: (aquacomputer_d5next) Add Aquacomputer Aquaero sensors Leonard Anderweit
2022-12-18 11:31 ` Leonard Anderweit [this message]
2022-12-18 11:31 ` [PATCH 2/6] hwmon: (aquacomputer_d5next) Restructure flow sensor reading Leonard Anderweit
2022-12-18 11:31 ` [PATCH 3/6] hwmon: (aquacomputer_d5next) Add structure for fan layout Leonard Anderweit
2022-12-18 11:31 ` [PATCH 4/6] hwmon: (aquacomputer_d5next) Device dependent serial number and firmware offsets Leonard Anderweit
2022-12-18 11:31 ` [PATCH 5/6] hwmon: (aquacomputer_d5next) Make fan sensor offsets u16 Leonard Anderweit
2022-12-18 11:31 ` [PATCH 6/6] hwmon: (aquacomputer_d5next) Support sensors for Aquacomputer Aquaero Leonard Anderweit
2022-12-29 14:20   ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221218113131.3752-2-leonard.anderweit@gmail.com \
    --to=leonard.anderweit@gmail.com \
    --cc=corbet@lwn.net \
    --cc=jdelvare@suse.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=me@jackdoan.com \
    --cc=savicaleksa83@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.