From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Duke Xin <duke_xinanwen@163.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 5.10 06/18] USB: serial: option: add Quectel EM05-G modem
Date: Mon, 19 Dec 2022 20:24:59 +0100 [thread overview]
Message-ID: <20221219182940.894471205@linuxfoundation.org> (raw)
In-Reply-To: <20221219182940.701087296@linuxfoundation.org>
From: Duke Xin <duke_xinanwen@163.com>
commit f0052d7a1edb3d8921b4e154aa8c46c4845b3714 upstream.
The EM05-G modem has 2 USB configurations that are configurable via the AT
command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with
the following interfaces, respectively:
"RMNET" : AT + DIAG + NMEA + Modem + QMI
"MBIM" : MBIM + AT + DIAG + NMEA + Modem
The detailed description of the USB configuration for each mode as follows:
RMNET Mode
--------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0311 Rev= 3.18
S: Manufacturer=Quectel
S: Product=Quectel EM05-G
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
MBIM Mode
--------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0311 Rev= 3.18
S: Manufacturer=Quectel
S: Product=Quectel EM05-G
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Duke Xin <duke_xinanwen@163.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -255,6 +255,7 @@ static void option_instat_callback(struc
#define QUECTEL_PRODUCT_EP06 0x0306
#define QUECTEL_PRODUCT_EM05G 0x030a
#define QUECTEL_PRODUCT_EM060K 0x030b
+#define QUECTEL_PRODUCT_EM05G_SG 0x0311
#define QUECTEL_PRODUCT_EM12 0x0512
#define QUECTEL_PRODUCT_RM500Q 0x0800
#define QUECTEL_PRODUCT_RM520N 0x0801
@@ -1160,6 +1161,8 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
.driver_info = RSVD(6) | ZLP },
+ { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_SG, 0xff),
+ .driver_info = RSVD(6) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },
next prev parent reply other threads:[~2022-12-19 19:28 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-19 19:24 [PATCH 5.10 00/18] 5.10.161-rc1 review Greg Kroah-Hartman
2022-12-19 19:24 ` [PATCH 5.10 01/18] udf: Discard preallocation before extending file with a hole Greg Kroah-Hartman
2022-12-19 19:24 ` [PATCH 5.10 02/18] udf: Fix preallocation discarding at indirect extent boundary Greg Kroah-Hartman
2022-12-19 19:24 ` [PATCH 5.10 03/18] udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size Greg Kroah-Hartman
2022-12-19 19:24 ` [PATCH 5.10 04/18] udf: Fix extending file within last block Greg Kroah-Hartman
2022-12-19 19:24 ` [PATCH 5.10 05/18] usb: gadget: uvc: Prevent buffer overflow in setup handler Greg Kroah-Hartman
2022-12-19 19:24 ` Greg Kroah-Hartman [this message]
2022-12-19 19:25 ` [PATCH 5.10 07/18] USB: serial: cp210x: add Kamstrup RF sniffer PIDs Greg Kroah-Hartman
2022-12-19 19:25 ` [PATCH 5.10 08/18] USB: serial: f81232: fix division by zero on line-speed change Greg Kroah-Hartman
2022-12-19 19:25 ` [PATCH 5.10 09/18] USB: serial: f81534: " Greg Kroah-Hartman
2022-12-19 19:25 ` [PATCH 5.10 10/18] xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-N Greg Kroah-Hartman
2022-12-19 19:25 ` [PATCH 5.10 11/18] igb: Initialize mailbox message for VF reset Greg Kroah-Hartman
2022-12-19 19:25 ` [PATCH 5.10 12/18] usb: ulpi: defer ulpi_register on ulpi_read_id timeout Greg Kroah-Hartman
2022-12-19 19:25 ` [PATCH 5.10 13/18] HID: ite: Add support for Acer S1002 keyboard-dock Greg Kroah-Hartman
2022-12-19 19:25 ` [PATCH 5.10 14/18] HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E Greg Kroah-Hartman
2022-12-19 19:25 ` [PATCH 5.10 15/18] HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch V 10 Greg Kroah-Hartman
2022-12-19 19:25 ` [PATCH 5.10 16/18] HID: uclogic: Add HID_QUIRK_HIDINPUT_FORCE quirk Greg Kroah-Hartman
2022-12-19 19:25 ` [PATCH 5.10 17/18] Bluetooth: L2CAP: Fix u8 overflow Greg Kroah-Hartman
2022-12-19 19:25 ` [PATCH 5.10 18/18] net: loopback: use NET_NAME_PREDICTABLE for name_assign_type Greg Kroah-Hartman
2022-12-19 22:12 ` [PATCH 5.10 00/18] 5.10.161-rc1 review Pavel Machek
2022-12-19 22:36 ` Slade Watkins
2022-12-21 1:15 ` Slade Watkins
2022-12-19 23:21 ` Florian Fainelli
2022-12-20 0:22 ` Shuah Khan
2022-12-20 6:57 ` Naresh Kamboju
2022-12-20 9:18 ` Rudi Heitbaum
2022-12-20 11:18 ` Sudip Mukherjee (Codethink)
2022-12-20 14:48 ` Guenter Roeck
2022-12-20 15:33 ` Guenter Roeck
2022-12-20 17:50 ` Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221219182940.894471205@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=duke_xinanwen@163.com \
--cc=johan@kernel.org \
--cc=patches@lists.linux.dev \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.