All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: andersson@kernel.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, bhelgaas@google.com,
	linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/3] arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1
Date: Tue, 20 Dec 2022 16:12:52 +0530	[thread overview]
Message-ID: <20221220104252.GC38609@thinkpad> (raw)
In-Reply-To: <741887b5-8f83-4db5-bb17-755afc18716d@linaro.org>

On Mon, Dec 19, 2022 at 09:51:40PM +0100, Konrad Dybcio wrote:
> 
> 
> On 19.12.2022 20:14, Manivannan Sadhasivam wrote:
> > Both PCIe0 and PCIe1 controllers are capable of receiving MSIs from
> > endpoint devices using GIC-ITS MSI controller. Add support for it.
> > 
> > Currently, BDF (0:0.0) and BDF (1:0.0) are enabled and with the
> > msi-map-mask of 0xff00, all the 32 devices under these two busses can
> > share the same Device ID.
> > 
> > The GIC-ITS MSI implementation provides an advantage over internal MSI
> > implementation using Locality-specific Peripheral Interrupts (LPI) that
> > would allow MSIs to be targeted for each CPU core.
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> This breaks PCIe Wi-Fi on Xperia 1 IV:
> 
> [   32.711199] ath11k_pci 0000:01:00.0: Adding to iommu group 5
> [   32.713738] ath11k_pci 0000:01:00.0: BAR 0: assigned [mem 0x60400000-0x605fffff 64bit]
> [   32.715447] ath11k_pci 0000:01:00.0: MSI vectors: 32
> [   32.715485] ath11k_pci 0000:01:00.0: wcn6855 hw2.1
> [   32.873873] mhi mhi0: Requested to power ON
> [   32.873896] mhi mhi0: Power on setup success
> [   65.161798] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x91517088, fsynr=0x640001, cbfrsynra=0x1c00, cb=5
> 

Thanks a lot for testing! Can you please share the full dmesg log?

Thanks,
Mani

> 
> Konrad
> >  arch/arm64/boot/dts/qcom/sm8450.dtsi | 12 ++++++------
> >  1 file changed, 6 insertions(+), 6 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> > index 570475040d95..276ceba4c247 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> > @@ -1733,9 +1733,9 @@ pcie0: pci@1c00000 {
> >  			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
> >  				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
> >  
> > -			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
> > -			interrupt-names = "msi";
> > -			#interrupt-cells = <1>;
> > +			msi-map = <0x0 &gic_its 0x5980 0x1>,
> > +				  <0x100 &gic_its 0x5981 0x1>;
> > +			msi-map-mask = <0xff00>;
> >  			interrupt-map-mask = <0 0 0 0x7>;
> >  			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> >  					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
> > @@ -1842,9 +1842,9 @@ pcie1: pci@1c08000 {
> >  			ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>,
> >  				 <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>;
> >  
> > -			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
> > -			interrupt-names = "msi";
> > -			#interrupt-cells = <1>;
> > +			msi-map = <0x0 &gic_its 0x5a01 0x1>,
> > +				  <0x100 &gic_its 0x5a00 0x1>;
> > +			msi-map-mask = <0xff00>;
> >  			interrupt-map-mask = <0 0 0 0x7>;
> >  			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> >  					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */

-- 
மணிவண்ணன் சதாசிவம்

  reply	other threads:[~2022-12-20 10:43 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-19 19:14 [PATCH 0/3] Qcom: Add GIC-ITS support to SM8450 PCIe controllers Manivannan Sadhasivam
2022-12-19 19:14 ` [PATCH 1/3] dt-bindings: PCI: qcom: Update maintainers Manivannan Sadhasivam
2022-12-20 10:24   ` Krzysztof Kozlowski
2022-12-19 19:14 ` [PATCH 2/3] dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties Manivannan Sadhasivam
2022-12-20 10:29   ` Krzysztof Kozlowski
2022-12-19 19:14 ` [PATCH 3/3] arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1 Manivannan Sadhasivam
2022-12-19 20:51   ` Konrad Dybcio
2022-12-20 10:42     ` Manivannan Sadhasivam [this message]
2022-12-19 21:46   ` Dmitry Baryshkov
2022-12-20 10:34     ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221220104252.GC38609@thinkpad \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=andersson@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.