[PATCH net-next 4/6] net: ipa: register IPA interrupt handlers directly

[Alex Elder <elder@linaro.org>]

Declare the microcontroller IPA interrupt handler publicly, and
assign it directly in ipa_interrupt_config().  Make the SUSPEND IPA
interrupt handler public, and rename it ipa_power_suspend_handler().
Assign it directly in ipa_interrupt_config() as well.

This makes it unnecessary to do this in ipa_interrupt_add().  Make
similar changes for removing IPA interrupt handlers.

The next two patches will finish the cleanup, removing the
add/remove functions and the handler array entirely.

Signed-off-by: Alex Elder <elder@linaro.org>
---
 drivers/net/ipa/ipa_interrupt.c | 16 ++++++++--------
 drivers/net/ipa/ipa_power.c     | 14 ++------------
 drivers/net/ipa/ipa_power.h     | 12 ++++++++++++
 drivers/net/ipa/ipa_uc.c        |  2 +-
 drivers/net/ipa/ipa_uc.h        |  8 ++++++++
 5 files changed, 31 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ipa/ipa_interrupt.c b/drivers/net/ipa/ipa_interrupt.c
index 87f4b94d02a3f..f32ac40a79372 100644
--- a/drivers/net/ipa/ipa_interrupt.c
+++ b/drivers/net/ipa/ipa_interrupt.c
@@ -26,6 +26,8 @@
 #include "ipa.h"
 #include "ipa_reg.h"
 #include "ipa_endpoint.h"
+#include "ipa_power.h"
+#include "ipa_uc.h"
 #include "ipa_interrupt.h"
 
 /**
@@ -228,20 +230,14 @@ void ipa_interrupt_simulate_suspend(struct ipa_interrupt *interrupt)
 void ipa_interrupt_add(struct ipa_interrupt *interrupt,
 		       enum ipa_irq_id ipa_irq, ipa_irq_handler_t handler)
 {
-	if (WARN_ON(ipa_irq >= IPA_IRQ_COUNT))
-		return;
-
-	interrupt->handler[ipa_irq] = handler;
+	WARN_ON(ipa_irq >= IPA_IRQ_COUNT);
 }
 
 /* Remove the handler for an IPA interrupt type */
 void
 ipa_interrupt_remove(struct ipa_interrupt *interrupt, enum ipa_irq_id ipa_irq)
 {
-	if (WARN_ON(ipa_irq >= IPA_IRQ_COUNT))
-		return;
-
-	interrupt->handler[ipa_irq] = NULL;
+	WARN_ON(ipa_irq >= IPA_IRQ_COUNT);
 }
 
 /* Configure the IPA interrupt framework */
@@ -284,6 +280,10 @@ struct ipa_interrupt *ipa_interrupt_config(struct ipa *ipa)
 		goto err_free_irq;
 	}
 
+	interrupt->handler[IPA_IRQ_UC_0] = ipa_uc_interrupt_handler;
+	interrupt->handler[IPA_IRQ_UC_1] = ipa_uc_interrupt_handler;
+	interrupt->handler[IPA_IRQ_TX_SUSPEND] = ipa_power_suspend_handler;
+
 	return interrupt;
 
 err_free_irq:
diff --git a/drivers/net/ipa/ipa_power.c b/drivers/net/ipa/ipa_power.c
index 9148d606d5fc2..4198f8e97e40b 100644
--- a/drivers/net/ipa/ipa_power.c
+++ b/drivers/net/ipa/ipa_power.c
@@ -202,17 +202,7 @@ u32 ipa_core_clock_rate(struct ipa *ipa)
 	return ipa->power ? (u32)clk_get_rate(ipa->power->core) : 0;
 }
 
-/**
- * ipa_suspend_handler() - Handle the suspend IPA interrupt
- * @ipa:	IPA pointer
- * @irq_id:	IPA interrupt type (unused)
- *
- * If an RX endpoint is suspended, and the IPA has a packet destined for
- * that endpoint, the IPA generates a SUSPEND interrupt to inform the AP
- * that it should resume the endpoint.  If we get one of these interrupts
- * we just wake up the system.
- */
-static void ipa_suspend_handler(struct ipa *ipa, enum ipa_irq_id irq_id)
+void ipa_power_suspend_handler(struct ipa *ipa, enum ipa_irq_id irq_id)
 {
 	/* To handle an IPA interrupt we will have resumed the hardware
 	 * just to handle the interrupt, so we're done.  If we are in a
@@ -336,7 +326,7 @@ int ipa_power_setup(struct ipa *ipa)
 	int ret;
 
 	ipa_interrupt_add(ipa->interrupt, IPA_IRQ_TX_SUSPEND,
-			  ipa_suspend_handler);
+			  ipa_power_suspend_handler);
 	ipa_interrupt_enable(ipa, IPA_IRQ_TX_SUSPEND);
 
 	ret = device_init_wakeup(&ipa->pdev->dev, true);
diff --git a/drivers/net/ipa/ipa_power.h b/drivers/net/ipa/ipa_power.h
index 896f052e51a1c..3a4c59ea1222b 100644
--- a/drivers/net/ipa/ipa_power.h
+++ b/drivers/net/ipa/ipa_power.h
@@ -10,6 +10,7 @@ struct device;
 
 struct ipa;
 struct ipa_power_data;
+enum ipa_irq_id;
 
 /* IPA device power management function block */
 extern const struct dev_pm_ops ipa_pm_ops;
@@ -47,6 +48,17 @@ void ipa_power_modem_queue_active(struct ipa *ipa);
  */
 void ipa_power_retention(struct ipa *ipa, bool enable);
 
+/**
+ * ipa_power_suspend_handler() - Handler for SUSPEND IPA interrupts
+ * @ipa:	IPA pointer
+ * @irq_id:	IPA interrupt ID (unused)
+ *
+ * If an RX endpoint is suspended, and the IPA has a packet destined for
+ * that endpoint, the IPA generates a SUSPEND interrupt to inform the AP
+ * that it should resume the endpoint.
+ */
+void ipa_power_suspend_handler(struct ipa *ipa, enum ipa_irq_id irq_id);
+
 /**
  * ipa_power_setup() - Set up IPA power management
  * @ipa:	IPA pointer
diff --git a/drivers/net/ipa/ipa_uc.c b/drivers/net/ipa/ipa_uc.c
index af541758d047f..6b7d289cfaffa 100644
--- a/drivers/net/ipa/ipa_uc.c
+++ b/drivers/net/ipa/ipa_uc.c
@@ -170,7 +170,7 @@ static void ipa_uc_response_hdlr(struct ipa *ipa)
 	}
 }
 
-static void ipa_uc_interrupt_handler(struct ipa *ipa, enum ipa_irq_id irq_id)
+void ipa_uc_interrupt_handler(struct ipa *ipa, enum ipa_irq_id irq_id)
 {
 	/* Silently ignore anything unrecognized */
 	if (irq_id == IPA_IRQ_UC_0)
diff --git a/drivers/net/ipa/ipa_uc.h b/drivers/net/ipa/ipa_uc.h
index 8514096e6f36f..85aa0df818c23 100644
--- a/drivers/net/ipa/ipa_uc.h
+++ b/drivers/net/ipa/ipa_uc.h
@@ -7,6 +7,14 @@
 #define _IPA_UC_H_
 
 struct ipa;
+enum ipa_irq_id;
+
+/**
+ * ipa_uc_interrupt_handler() - Handler for microcontroller IPA interrupts
+ * @ipa:	IPA pointer
+ * @irq_id:	IPA interrupt ID
+ */
+void ipa_uc_interrupt_handler(struct ipa *ipa, enum ipa_irq_id irq_id);
 
 /**
  * ipa_uc_config() - Configure the IPA microcontroller subsystem
-- 
2.34.1