From: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
To: qemu-devel@nongnu.org
Cc: qemu-riscv@nongnu.org, alistair.francis@wdc.com,
richard.henderson@linaro.org,
Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Subject: [PATCH 2/2] target/riscv/cpu.c: do not skip misa logic in riscv_cpu_realize()
Date: Tue, 10 Jan 2023 17:14:05 -0300 [thread overview]
Message-ID: <20230110201405.247785-3-dbarboza@ventanamicro.com> (raw)
In-Reply-To: <20230110201405.247785-1-dbarboza@ventanamicro.com>
All RISCV CPUs are setting cpu->cfg during their cpu_init() functions,
meaning that there's no reason to skip all the misa validation and setup
if misa_ext was set beforehand - especially since we're setting an
updated value in set_misa() in the end.
Put this code chunk into a new riscv_cpu_validate_set_extensions()
helper and always execute it regardless of what the board set in
env->misa_ext.
This will put more responsibility in how each board is going to init
their attributes and extensions if they're not using the defaults.
It'll also allow realize() to do its job looking only at the extensions
enabled per se, not corner cases that some CPUs might have, and we won't
have to change multiple code paths to fix or change how extensions work.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
---
target/riscv/cpu.c | 485 +++++++++++++++++++++++----------------------
1 file changed, 248 insertions(+), 237 deletions(-)
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index b8c1edb7c2..33ed59a1b6 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -631,6 +631,250 @@ static void riscv_cpu_disas_set_info(CPUState *s, disassemble_info *info)
}
}
+/*
+ * Check consistency between chosen extensions while setting
+ * cpu->cfg accordingly, doing a set_misa() in the end.
+ */
+static void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp)
+{
+ CPURISCVState *env = &cpu->env;
+ uint32_t ext = 0;
+
+ /* Do some ISA extension error checking */
+ if (cpu->cfg.ext_g && !(cpu->cfg.ext_i && cpu->cfg.ext_m &&
+ cpu->cfg.ext_a && cpu->cfg.ext_f &&
+ cpu->cfg.ext_d &&
+ cpu->cfg.ext_icsr && cpu->cfg.ext_ifencei)) {
+ warn_report("Setting G will also set IMAFD_Zicsr_Zifencei");
+ cpu->cfg.ext_i = true;
+ cpu->cfg.ext_m = true;
+ cpu->cfg.ext_a = true;
+ cpu->cfg.ext_f = true;
+ cpu->cfg.ext_d = true;
+ cpu->cfg.ext_icsr = true;
+ cpu->cfg.ext_ifencei = true;
+ }
+
+ if (cpu->cfg.ext_i && cpu->cfg.ext_e) {
+ error_setg(errp,
+ "I and E extensions are incompatible");
+ return;
+ }
+
+ if (!cpu->cfg.ext_i && !cpu->cfg.ext_e) {
+ error_setg(errp,
+ "Either I or E extension must be set");
+ return;
+ }
+
+ if (cpu->cfg.ext_s && !cpu->cfg.ext_u) {
+ error_setg(errp,
+ "Setting S extension without U extension is illegal");
+ return;
+ }
+
+ if (cpu->cfg.ext_h && !cpu->cfg.ext_i) {
+ error_setg(errp,
+ "H depends on an I base integer ISA with 32 x registers");
+ return;
+ }
+
+ if (cpu->cfg.ext_h && !cpu->cfg.ext_s) {
+ error_setg(errp, "H extension implicitly requires S-mode");
+ return;
+ }
+
+ if (cpu->cfg.ext_f && !cpu->cfg.ext_icsr) {
+ error_setg(errp, "F extension requires Zicsr");
+ return;
+ }
+
+ if ((cpu->cfg.ext_zawrs) && !cpu->cfg.ext_a) {
+ error_setg(errp, "Zawrs extension requires A extension");
+ return;
+ }
+
+ if ((cpu->cfg.ext_zfh || cpu->cfg.ext_zfhmin) && !cpu->cfg.ext_f) {
+ error_setg(errp, "Zfh/Zfhmin extensions require F extension");
+ return;
+ }
+
+ if (cpu->cfg.ext_d && !cpu->cfg.ext_f) {
+ error_setg(errp, "D extension requires F extension");
+ return;
+ }
+
+ if (cpu->cfg.ext_v && !cpu->cfg.ext_d) {
+ error_setg(errp, "V extension requires D extension");
+ return;
+ }
+
+ if ((cpu->cfg.ext_zve32f || cpu->cfg.ext_zve64f) && !cpu->cfg.ext_f) {
+ error_setg(errp, "Zve32f/Zve64f extensions require F extension");
+ return;
+ }
+
+ /* Set the ISA extensions, checks should have happened above */
+ if (cpu->cfg.ext_zdinx || cpu->cfg.ext_zhinx ||
+ cpu->cfg.ext_zhinxmin) {
+ cpu->cfg.ext_zfinx = true;
+ }
+
+ if (cpu->cfg.ext_zfinx) {
+ if (!cpu->cfg.ext_icsr) {
+ error_setg(errp, "Zfinx extension requires Zicsr");
+ return;
+ }
+ if (cpu->cfg.ext_f) {
+ error_setg(errp,
+ "Zfinx cannot be supported together with F extension");
+ return;
+ }
+ }
+
+ if (cpu->cfg.ext_c) {
+ cpu->cfg.ext_zca = true;
+ if (cpu->cfg.ext_f && env->misa_mxl_max == MXL_RV32) {
+ cpu->cfg.ext_zcf = true;
+ }
+ if (cpu->cfg.ext_d) {
+ cpu->cfg.ext_zcd = true;
+ }
+ }
+
+ if (env->misa_mxl_max != MXL_RV32 && cpu->cfg.ext_zcf) {
+ error_setg(errp, "Zcf extension is only relevant to RV32");
+ return;
+ }
+
+ if (!cpu->cfg.ext_f && cpu->cfg.ext_zcf) {
+ error_setg(errp, "Zcf extension requires F extension");
+ return;
+ }
+
+ if (!cpu->cfg.ext_d && cpu->cfg.ext_zcd) {
+ error_setg(errp, "Zcd extension requires D extension");
+ return;
+ }
+
+ if ((cpu->cfg.ext_zcf || cpu->cfg.ext_zcd || cpu->cfg.ext_zcb ||
+ cpu->cfg.ext_zcmp || cpu->cfg.ext_zcmt) && !cpu->cfg.ext_zca) {
+ error_setg(errp, "Zcf/Zcd/Zcb/Zcmp/Zcmt extensions require Zca "
+ "extension");
+ return;
+ }
+
+ if (cpu->cfg.ext_zcd && (cpu->cfg.ext_zcmp || cpu->cfg.ext_zcmt)) {
+ error_setg(errp, "Zcmp/Zcmt extensions are incompatible with "
+ "Zcd extension");
+ return;
+ }
+
+ if (cpu->cfg.ext_zcmt && !cpu->cfg.ext_icsr) {
+ error_setg(errp, "Zcmt extension requires Zicsr extension");
+ return;
+ }
+
+ if (cpu->cfg.ext_zk) {
+ cpu->cfg.ext_zkn = true;
+ cpu->cfg.ext_zkr = true;
+ cpu->cfg.ext_zkt = true;
+ }
+
+ if (cpu->cfg.ext_zkn) {
+ cpu->cfg.ext_zbkb = true;
+ cpu->cfg.ext_zbkc = true;
+ cpu->cfg.ext_zbkx = true;
+ cpu->cfg.ext_zkne = true;
+ cpu->cfg.ext_zknd = true;
+ cpu->cfg.ext_zknh = true;
+ }
+
+ if (cpu->cfg.ext_zks) {
+ cpu->cfg.ext_zbkb = true;
+ cpu->cfg.ext_zbkc = true;
+ cpu->cfg.ext_zbkx = true;
+ cpu->cfg.ext_zksed = true;
+ cpu->cfg.ext_zksh = true;
+ }
+
+ if (cpu->cfg.ext_i) {
+ ext |= RVI;
+ }
+ if (cpu->cfg.ext_e) {
+ ext |= RVE;
+ }
+ if (cpu->cfg.ext_m) {
+ ext |= RVM;
+ }
+ if (cpu->cfg.ext_a) {
+ ext |= RVA;
+ }
+ if (cpu->cfg.ext_f) {
+ ext |= RVF;
+ }
+ if (cpu->cfg.ext_d) {
+ ext |= RVD;
+ }
+ if (cpu->cfg.ext_c) {
+ ext |= RVC;
+ }
+ if (cpu->cfg.ext_s) {
+ ext |= RVS;
+ }
+ if (cpu->cfg.ext_u) {
+ ext |= RVU;
+ }
+ if (cpu->cfg.ext_h) {
+ ext |= RVH;
+ }
+ if (cpu->cfg.ext_v) {
+ int vext_version = VEXT_VERSION_1_00_0;
+ ext |= RVV;
+ if (!is_power_of_2(cpu->cfg.vlen)) {
+ error_setg(errp,
+ "Vector extension VLEN must be power of 2");
+ return;
+ }
+ if (cpu->cfg.vlen > RV_VLEN_MAX || cpu->cfg.vlen < 128) {
+ error_setg(errp,
+ "Vector extension implementation only supports VLEN "
+ "in the range [128, %d]", RV_VLEN_MAX);
+ return;
+ }
+ if (!is_power_of_2(cpu->cfg.elen)) {
+ error_setg(errp,
+ "Vector extension ELEN must be power of 2");
+ return;
+ }
+ if (cpu->cfg.elen > 64 || cpu->cfg.elen < 8) {
+ error_setg(errp,
+ "Vector extension implementation only supports ELEN "
+ "in the range [8, 64]");
+ return;
+ }
+ if (cpu->cfg.vext_spec) {
+ if (!g_strcmp0(cpu->cfg.vext_spec, "v1.0")) {
+ vext_version = VEXT_VERSION_1_00_0;
+ } else {
+ error_setg(errp,
+ "Unsupported vector spec version '%s'",
+ cpu->cfg.vext_spec);
+ return;
+ }
+ } else {
+ qemu_log("vector version is not specified, "
+ "use the default value v1.0\n");
+ }
+ set_vext_version(env, vext_version);
+ }
+ if (cpu->cfg.ext_j) {
+ ext |= RVJ;
+ }
+
+ set_misa(env, env->misa_mxl, ext);
+}
+
static void riscv_cpu_realize(DeviceState *dev, Error **errp)
{
CPUState *cs = CPU(dev);
@@ -726,243 +970,10 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)
}
assert(env->misa_mxl_max == env->misa_mxl);
- /* If only MISA_EXT is unset for misa, then set it from properties */
- if (env->misa_ext == 0) {
- uint32_t ext = 0;
-
- /* Do some ISA extension error checking */
- if (cpu->cfg.ext_g && !(cpu->cfg.ext_i && cpu->cfg.ext_m &&
- cpu->cfg.ext_a && cpu->cfg.ext_f &&
- cpu->cfg.ext_d &&
- cpu->cfg.ext_icsr && cpu->cfg.ext_ifencei)) {
- warn_report("Setting G will also set IMAFD_Zicsr_Zifencei");
- cpu->cfg.ext_i = true;
- cpu->cfg.ext_m = true;
- cpu->cfg.ext_a = true;
- cpu->cfg.ext_f = true;
- cpu->cfg.ext_d = true;
- cpu->cfg.ext_icsr = true;
- cpu->cfg.ext_ifencei = true;
- }
-
- if (cpu->cfg.ext_i && cpu->cfg.ext_e) {
- error_setg(errp,
- "I and E extensions are incompatible");
- return;
- }
-
- if (!cpu->cfg.ext_i && !cpu->cfg.ext_e) {
- error_setg(errp,
- "Either I or E extension must be set");
- return;
- }
-
- if (cpu->cfg.ext_s && !cpu->cfg.ext_u) {
- error_setg(errp,
- "Setting S extension without U extension is illegal");
- return;
- }
-
- if (cpu->cfg.ext_h && !cpu->cfg.ext_i) {
- error_setg(errp,
- "H depends on an I base integer ISA with 32 x registers");
- return;
- }
-
- if (cpu->cfg.ext_h && !cpu->cfg.ext_s) {
- error_setg(errp, "H extension implicitly requires S-mode");
- return;
- }
-
- if (cpu->cfg.ext_f && !cpu->cfg.ext_icsr) {
- error_setg(errp, "F extension requires Zicsr");
- return;
- }
-
- if ((cpu->cfg.ext_zawrs) && !cpu->cfg.ext_a) {
- error_setg(errp, "Zawrs extension requires A extension");
- return;
- }
-
- if ((cpu->cfg.ext_zfh || cpu->cfg.ext_zfhmin) && !cpu->cfg.ext_f) {
- error_setg(errp, "Zfh/Zfhmin extensions require F extension");
- return;
- }
-
- if (cpu->cfg.ext_d && !cpu->cfg.ext_f) {
- error_setg(errp, "D extension requires F extension");
- return;
- }
-
- if (cpu->cfg.ext_v && !cpu->cfg.ext_d) {
- error_setg(errp, "V extension requires D extension");
- return;
- }
-
- if ((cpu->cfg.ext_zve32f || cpu->cfg.ext_zve64f) && !cpu->cfg.ext_f) {
- error_setg(errp, "Zve32f/Zve64f extensions require F extension");
- return;
- }
-
- /* Set the ISA extensions, checks should have happened above */
- if (cpu->cfg.ext_zdinx || cpu->cfg.ext_zhinx ||
- cpu->cfg.ext_zhinxmin) {
- cpu->cfg.ext_zfinx = true;
- }
-
- if (cpu->cfg.ext_zfinx) {
- if (!cpu->cfg.ext_icsr) {
- error_setg(errp, "Zfinx extension requires Zicsr");
- return;
- }
- if (cpu->cfg.ext_f) {
- error_setg(errp,
- "Zfinx cannot be supported together with F extension");
- return;
- }
- }
-
- if (cpu->cfg.ext_c) {
- cpu->cfg.ext_zca = true;
- if (cpu->cfg.ext_f && env->misa_mxl_max == MXL_RV32) {
- cpu->cfg.ext_zcf = true;
- }
- if (cpu->cfg.ext_d) {
- cpu->cfg.ext_zcd = true;
- }
- }
-
- if (env->misa_mxl_max != MXL_RV32 && cpu->cfg.ext_zcf) {
- error_setg(errp, "Zcf extension is only relevant to RV32");
- return;
- }
-
- if (!cpu->cfg.ext_f && cpu->cfg.ext_zcf) {
- error_setg(errp, "Zcf extension requires F extension");
- return;
- }
-
- if (!cpu->cfg.ext_d && cpu->cfg.ext_zcd) {
- error_setg(errp, "Zcd extension requires D extension");
- return;
- }
-
- if ((cpu->cfg.ext_zcf || cpu->cfg.ext_zcd || cpu->cfg.ext_zcb ||
- cpu->cfg.ext_zcmp || cpu->cfg.ext_zcmt) && !cpu->cfg.ext_zca) {
- error_setg(errp, "Zcf/Zcd/Zcb/Zcmp/Zcmt extensions require Zca "
- "extension");
- return;
- }
-
- if (cpu->cfg.ext_zcd && (cpu->cfg.ext_zcmp || cpu->cfg.ext_zcmt)) {
- error_setg(errp, "Zcmp/Zcmt extensions are incompatible with "
- "Zcd extension");
- return;
- }
-
- if (cpu->cfg.ext_zcmt && !cpu->cfg.ext_icsr) {
- error_setg(errp, "Zcmt extension requires Zicsr extension");
- return;
- }
-
- if (cpu->cfg.ext_zk) {
- cpu->cfg.ext_zkn = true;
- cpu->cfg.ext_zkr = true;
- cpu->cfg.ext_zkt = true;
- }
-
- if (cpu->cfg.ext_zkn) {
- cpu->cfg.ext_zbkb = true;
- cpu->cfg.ext_zbkc = true;
- cpu->cfg.ext_zbkx = true;
- cpu->cfg.ext_zkne = true;
- cpu->cfg.ext_zknd = true;
- cpu->cfg.ext_zknh = true;
- }
-
- if (cpu->cfg.ext_zks) {
- cpu->cfg.ext_zbkb = true;
- cpu->cfg.ext_zbkc = true;
- cpu->cfg.ext_zbkx = true;
- cpu->cfg.ext_zksed = true;
- cpu->cfg.ext_zksh = true;
- }
-
- if (cpu->cfg.ext_i) {
- ext |= RVI;
- }
- if (cpu->cfg.ext_e) {
- ext |= RVE;
- }
- if (cpu->cfg.ext_m) {
- ext |= RVM;
- }
- if (cpu->cfg.ext_a) {
- ext |= RVA;
- }
- if (cpu->cfg.ext_f) {
- ext |= RVF;
- }
- if (cpu->cfg.ext_d) {
- ext |= RVD;
- }
- if (cpu->cfg.ext_c) {
- ext |= RVC;
- }
- if (cpu->cfg.ext_s) {
- ext |= RVS;
- }
- if (cpu->cfg.ext_u) {
- ext |= RVU;
- }
- if (cpu->cfg.ext_h) {
- ext |= RVH;
- }
- if (cpu->cfg.ext_v) {
- int vext_version = VEXT_VERSION_1_00_0;
- ext |= RVV;
- if (!is_power_of_2(cpu->cfg.vlen)) {
- error_setg(errp,
- "Vector extension VLEN must be power of 2");
- return;
- }
- if (cpu->cfg.vlen > RV_VLEN_MAX || cpu->cfg.vlen < 128) {
- error_setg(errp,
- "Vector extension implementation only supports VLEN "
- "in the range [128, %d]", RV_VLEN_MAX);
- return;
- }
- if (!is_power_of_2(cpu->cfg.elen)) {
- error_setg(errp,
- "Vector extension ELEN must be power of 2");
- return;
- }
- if (cpu->cfg.elen > 64 || cpu->cfg.elen < 8) {
- error_setg(errp,
- "Vector extension implementation only supports ELEN "
- "in the range [8, 64]");
- return;
- }
- if (cpu->cfg.vext_spec) {
- if (!g_strcmp0(cpu->cfg.vext_spec, "v1.0")) {
- vext_version = VEXT_VERSION_1_00_0;
- } else {
- error_setg(errp,
- "Unsupported vector spec version '%s'",
- cpu->cfg.vext_spec);
- return;
- }
- } else {
- qemu_log("vector version is not specified, "
- "use the default value v1.0\n");
- }
- set_vext_version(env, vext_version);
- }
- if (cpu->cfg.ext_j) {
- ext |= RVJ;
- }
-
- set_misa(env, env->misa_mxl, ext);
+ riscv_cpu_validate_set_extensions(cpu, &local_err);
+ if (local_err != NULL) {
+ error_propagate(errp, local_err);
+ return;
}
#ifndef CONFIG_USER_ONLY
--
2.39.0
next prev parent reply other threads:[~2023-01-10 20:14 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-10 20:14 [PATCH 0/2] target/riscv/cpu: fix sifive_u 32/64bits boot in riscv-to-apply.next Daniel Henrique Barboza
2023-01-10 20:14 ` [PATCH 1/2] target/riscv/cpu: set cpu->cfg in register_cpu_props() Daniel Henrique Barboza
2023-01-10 22:52 ` Alistair Francis
2023-01-11 5:39 ` Richard Henderson
2023-01-11 15:51 ` Daniel Henrique Barboza
2023-01-11 5:55 ` Bin Meng
2023-01-10 20:14 ` Daniel Henrique Barboza [this message]
2023-01-10 22:53 ` [PATCH 2/2] target/riscv/cpu.c: do not skip misa logic in riscv_cpu_realize() Alistair Francis
2023-01-11 5:56 ` Bin Meng
2023-01-10 22:27 ` [PATCH 0/2] target/riscv/cpu: fix sifive_u 32/64bits boot in riscv-to-apply.next Daniel Henrique Barboza
2023-01-11 5:01 ` Alistair Francis
2023-01-13 1:28 ` Bin Meng
2023-01-13 10:20 ` Daniel Henrique Barboza
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230110201405.247785-3-dbarboza@ventanamicro.com \
--to=dbarboza@ventanamicro.com \
--cc=alistair.francis@wdc.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.