From: Bjorn Andersson <andersson@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/6] arm64: dts: qcom: sdm845: move WCD9340 codec to separate file
Date: Mon, 16 Jan 2023 21:56:31 -0600 [thread overview]
Message-ID: <20230117035631.cgi6fjdrpz5eppca@builder.lan> (raw)
In-Reply-To: <20230113162245.117324-2-krzysztof.kozlowski@linaro.org>
On Fri, Jan 13, 2023 at 05:22:41PM +0100, Krzysztof Kozlowski wrote:
> WCD9340 codec node is not a property of the SoC, but board. Move it to
> separate file and include it in the specific boards. On all others,
> keep the Slimbus node disabled as it is empty.
>
I think this seems like a reasonable idea. But without clearly
documenting your intentions/guidelines we will soon have
sdm845-display.dtsi, sdm845-pcie.dtsi etc.
So please start there.
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../boot/dts/qcom/sdm845-audio-wcd9340.dtsi | 69 +++++++++++++++++++
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 1 +
> .../qcom/sdm845-xiaomi-beryllium-common.dtsi | 1 +
> .../boot/dts/qcom/sdm845-xiaomi-polaris.dts | 1 +
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 60 +---------------
> .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 1 +
> .../boot/dts/qcom/sdm850-samsung-w737.dts | 1 +
> 7 files changed, 75 insertions(+), 59 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/sdm845-audio-wcd9340.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-audio-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-audio-wcd9340.dtsi
> new file mode 100644
> index 000000000000..5bcce7d0d709
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm845-audio-wcd9340.dtsi
Why does this include the substring "audio"?
Regards,
Bjorn
> @@ -0,0 +1,69 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * SDM845 SoC device tree source
> + *
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + */
> +
> +&slim {
> + status = "okay";
> +
> + slim@1 {
> + reg = <1>;
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + wcd9340_ifd: ifd@0,0 {
> + compatible = "slim217,250";
> + reg = <0 0>;
> + };
> +
> + wcd9340: codec@1,0 {
> + compatible = "slim217,250";
> + reg = <1 0>;
> + slim-ifc-dev = <&wcd9340_ifd>;
> +
> + #sound-dai-cells = <1>;
> +
> + interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + #clock-cells = <0>;
> + clock-frequency = <9600000>;
> + clock-output-names = "mclk";
> + qcom,micbias1-microvolt = <1800000>;
> + qcom,micbias2-microvolt = <1800000>;
> + qcom,micbias3-microvolt = <1800000>;
> + qcom,micbias4-microvolt = <1800000>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + wcdgpio: gpio-controller@42 {
> + compatible = "qcom,wcd9340-gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0x42 0x2>;
> + };
> +
> + swm: swm@c85 {
> + compatible = "qcom,soundwire-v1.3.0";
> + reg = <0xc85 0x40>;
> + interrupts-extended = <&wcd9340 20>;
> +
> + qcom,dout-ports = <6>;
> + qcom,din-ports = <2>;
> + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>;
> + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>;
> + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>;
> +
> + #sound-dai-cells = <1>;
> + clocks = <&wcd9340>;
> + clock-names = "iface";
> + #address-cells = <2>;
> + #size-cells = <0>;
> + };
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index 6b355589edb3..3726465acbde 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -11,6 +11,7 @@
> #include <dt-bindings/sound/qcom,q6afe.h>
> #include <dt-bindings/sound/qcom,q6asm.h>
> #include "sdm845.dtsi"
> +#include "sdm845-audio-wcd9340.dtsi"
> #include "pm8998.dtsi"
> #include "pmi8998.dtsi"
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
> index 64de4ed9b0c8..e530a676b250 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
> @@ -7,6 +7,7 @@
> #include <dt-bindings/sound/qcom,q6afe.h>
> #include <dt-bindings/sound/qcom,q6asm.h>
> #include "sdm845.dtsi"
> +#include "sdm845-audio-wcd9340.dtsi"
> #include "pm8998.dtsi"
> #include "pmi8998.dtsi"
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
> index a80c3dd9a2da..f81619c8a3ba 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
> @@ -13,6 +13,7 @@
> #include <dt-bindings/sound/qcom,q6afe.h>
> #include <dt-bindings/sound/qcom,q6asm.h>
> #include "sdm845.dtsi"
> +#include "sdm845-audio-wcd9340.dtsi"
> #include "pm8998.dtsi"
> #include "pmi8998.dtsi"
> #include "pm8005.dtsi"
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 4c256431280a..f9b1d7a60fd6 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -3831,65 +3831,7 @@ slim: slim-ngd@171c0000 {
> iommus = <&apps_smmu 0x1806 0x0>;
> #address-cells = <1>;
> #size-cells = <0>;
> -
> - slim@1 {
> - reg = <1>;
> - #address-cells = <2>;
> - #size-cells = <0>;
> -
> - wcd9340_ifd: ifd@0,0 {
> - compatible = "slim217,250";
> - reg = <0 0>;
> - };
> -
> - wcd9340: codec@1,0 {
> - compatible = "slim217,250";
> - reg = <1 0>;
> - slim-ifc-dev = <&wcd9340_ifd>;
> -
> - #sound-dai-cells = <1>;
> -
> - interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-controller;
> - #interrupt-cells = <1>;
> -
> - #clock-cells = <0>;
> - clock-frequency = <9600000>;
> - clock-output-names = "mclk";
> - qcom,micbias1-microvolt = <1800000>;
> - qcom,micbias2-microvolt = <1800000>;
> - qcom,micbias3-microvolt = <1800000>;
> - qcom,micbias4-microvolt = <1800000>;
> -
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - wcdgpio: gpio-controller@42 {
> - compatible = "qcom,wcd9340-gpio";
> - gpio-controller;
> - #gpio-cells = <2>;
> - reg = <0x42 0x2>;
> - };
> -
> - swm: swm@c85 {
> - compatible = "qcom,soundwire-v1.3.0";
> - reg = <0xc85 0x40>;
> - interrupts-extended = <&wcd9340 20>;
> -
> - qcom,dout-ports = <6>;
> - qcom,din-ports = <2>;
> - qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>;
> - qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>;
> - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>;
> -
> - #sound-dai-cells = <1>;
> - clocks = <&wcd9340>;
> - clock-names = "iface";
> - #address-cells = <2>;
> - #size-cells = <0>;
> - };
> - };
> - };
> + status = "disabled";
> };
>
> lmh_cluster1: lmh@17d70800 {
> diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> index d9581f4440b3..5586c95aa1ff 100644
> --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> @@ -13,6 +13,7 @@
> #include <dt-bindings/sound/qcom,q6afe.h>
> #include <dt-bindings/sound/qcom,q6asm.h>
> #include "sdm850.dtsi"
> +#include "sdm845-audio-wcd9340.dtsi"
> #include "pm8998.dtsi"
>
> /*
> diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
> index 6730804f4e3e..40223704a2c7 100644
> --- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
> @@ -14,6 +14,7 @@
> #include <dt-bindings/sound/qcom,q6afe.h>
> #include <dt-bindings/sound/qcom,q6asm.h>
> #include "sdm850.dtsi"
> +#include "sdm845-audio-wcd9340.dtsi"
> #include "pm8998.dtsi"
>
> /*
> --
> 2.34.1
>
next prev parent reply other threads:[~2023-01-17 3:56 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-13 16:22 [PATCH 1/6] arm64: dts: qcom: sm8250: drop unused clock-frequency from rx-macro Krzysztof Kozlowski
2023-01-13 16:22 ` [PATCH 2/6] arm64: dts: qcom: sdm845: move WCD9340 codec to separate file Krzysztof Kozlowski
2023-01-14 20:33 ` Konrad Dybcio
2023-01-15 11:21 ` Krzysztof Kozlowski
2023-01-16 5:55 ` Dmitry Baryshkov
2023-01-16 7:58 ` Krzysztof Kozlowski
2023-01-16 8:56 ` Konrad Dybcio
2023-01-16 8:54 ` Konrad Dybcio
2023-01-17 3:56 ` Bjorn Andersson [this message]
2023-01-17 7:51 ` Krzysztof Kozlowski
2023-01-13 16:22 ` [PATCH 3/6] arm64: dts: qcom: sdm845-audio-wcd9340: commonize pinctrl Krzysztof Kozlowski
2023-01-14 20:33 ` Konrad Dybcio
2023-01-13 16:22 ` [PATCH 4/6] arm64: dts: qcom: sdm845-audio-wcd9340: commonize clocks Krzysztof Kozlowski
2023-01-14 20:34 ` Konrad Dybcio
2023-01-13 16:22 ` [PATCH 5/6] arm64: dts: qcom: sc8280xp: drop bogus clock-controller property Krzysztof Kozlowski
2023-01-13 16:22 ` [PATCH 6/6] arm64: dts: qcom: sc8280xp: drop unused properties from tx-macro Krzysztof Kozlowski
2023-01-14 20:34 ` Konrad Dybcio
2023-01-14 20:32 ` [PATCH 1/6] arm64: dts: qcom: sm8250: drop unused clock-frequency from rx-macro Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230117035631.cgi6fjdrpz5eppca@builder.lan \
--to=andersson@kernel.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.