Re: [net-next 03/15] net/mlx5: Add adjphase function to support hardware-only offset control

[Jakub Kicinski <kuba@kernel.org>]

On Thu, 19 Jan 2023 20:26:04 -0800 Rahul Rameshbabu wrote:
> One of my concerns with doing this is breaking userspace expectations.
> In linuxptp, there is a configuration setting "write_phase_mode" and an
> expectation that when adjphase is called, there will not be a fallback
> to adjtime. This because adjphase is used in situations where small fine
> tuning is explicitly needed, so the errors would indicate a logical or
> situational error.

I don't mean fallback - just do what you do in mlx5 directly in 
the core. The driver already does:

if delta < MAX
	use precise method
else
	use coarse method

> Quoting Vincent Cheng, the author of the adjphase functionality in the
> ptp core stack.
> 
> -----BEGIN QUOTE-----
>   adjtime modifies HW counter with a value to move the 1 PPS abruptly to new location.
>   adjphase modifies the frequency to quickly nudge the 1 PPS to new location and also includes a HW filter to smooth out the adjustments and fine tune frequency.
> 
>   Continuous small offset adjustments using adjtime, likley see sudden shifts of the 1 PPS.  The 1 PPS probably disappears and re-appears.
>   Continuous small offset adjustments using adjphase, should see continuous 1 PPS.
> 
>   adjtime is good for large offset corrections
>   adjphase is good for small offset corrections to allow HW filter to control the frequency instead of relying on SW filter.

Hm, so are you saying that:

adjtime(delta):
	clock += delta

but:

adjfreq(delta):
	on clock tick & while delta > 0:
		clock += small_value
		delta -= small_value

because from looking at mlx5 driver code its unclear whether the
implementation does a precise but one shot adjustment or gradual
adjustments.