From: Alexey Kardashevskiy <aik@amd.com>
To: Alexey Kardashevskiy <aik@amd.com>
Cc: <kvm@vger.kernel.org>, <x86@kernel.org>,
<linux-kernel@vger.kernel.org>, Yury Norov <yury.norov@gmail.com>,
Venu Busireddy <venu.busireddy@oracle.com>,
Tony Luck <tony.luck@intel.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
Thomas Gleixner <tglx@linutronix.de>,
"Sean Christopherson" <seanjc@google.com>,
Sandipan Das <sandipan.das@amd.com>,
Pawan Gupta <pawan.kumar.gupta@linux.intel.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Michael Roth <michael.roth@amd.com>,
Mario Limonciello <mario.limonciello@amd.com>,
Kim Phillips <kim.phillips@amd.com>,
Kees Cook <keescook@chromium.org>,
Juergen Gross <jgross@suse.com>, Jakub Kicinski <kuba@kernel.org>,
Ingo Molnar <mingo@redhat.com>,
Dave Hansen <dave.hansen@linux.intel.com>,
Daniel Sneddon <daniel.sneddon@linux.intel.com>,
Brijesh Singh <brijesh.singh@amd.com>,
Borislav Petkov <bp@alien8.de>,
Arnaldo Carvalho de Melo <acme@redhat.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Alexander Shishkin <alexander.shishkin@linux.intel.com>,
Adrian Hunter <adrian.hunter@intel.com>,
"Peter Zijlstra (Intel)" <peterz@infradead.org>,
"Jason A. Donenfeld" <Jason@zx2c4.com>,
"H. Peter Anvin" <hpa@zytor.com>
Subject: [PATCH kernel v3 1/3] x86/amd: Cache debug register values in percpu variables
Date: Fri, 20 Jan 2023 14:10:45 +1100 [thread overview]
Message-ID: <20230120031047.628097-2-aik@amd.com> (raw)
In-Reply-To: <20230120031047.628097-1-aik@amd.com>
Reading DR[0-3]_ADDR_MASK MSRs takes about 250 cycles which is going to
be noticeable with the AMD KVM SEV-ES DebugSwap feature enabled.
KVM is going to store host's DR[0-3] and DR[0-3]_ADDR_MASK before
switching to a guest; the hardware is going to swap these on VMRUN
and VMEXIT.
Store MSR values passed to set_dr_addr_mask() in percpu variables
(when changed) and return them via new amd_get_dr_addr_mask().
The gain here is about 10x.
As set_dr_addr_mask() uses the array too, change the @dr type to
unsigned to avoid checking for <0. And give it the amd_ prefix to match
the new helper as the whole DR_ADDR_MASK feature is AMD-specific anyway.
While at it, replace deprecated boot_cpu_has() with cpu_feature_enabled()
in set_dr_addr_mask().
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
---
Changes:
v3:
* fixed commit log
* amd_msr_dr_addr_masks do not do "-1"
* store processor id in a local variable
* s/set_dr_addr_mask/amd_set_dr_addr_mask/
v2:
* reworked to use arrays
* set() skips wrmsr() when the mask is not changed
* added stub for get_dr_addr_mask()
* changed @dr type to unsigned
* s/boot_cpu_has/cpu_feature_enabled/
* added amd_ prefix
---
arch/x86/include/asm/debugreg.h | 9 +++-
arch/x86/kernel/cpu/amd.c | 47 ++++++++++++++------
arch/x86/kernel/hw_breakpoint.c | 4 +-
3 files changed, 42 insertions(+), 18 deletions(-)
diff --git a/arch/x86/include/asm/debugreg.h b/arch/x86/include/asm/debugreg.h
index b049d950612f..f126b2ee890f 100644
--- a/arch/x86/include/asm/debugreg.h
+++ b/arch/x86/include/asm/debugreg.h
@@ -126,9 +126,14 @@ static __always_inline void local_db_restore(unsigned long dr7)
}
#ifdef CONFIG_CPU_SUP_AMD
-extern void set_dr_addr_mask(unsigned long mask, int dr);
+extern void amd_set_dr_addr_mask(unsigned long mask, unsigned int dr);
+extern unsigned long amd_get_dr_addr_mask(unsigned int dr);
#else
-static inline void set_dr_addr_mask(unsigned long mask, int dr) { }
+static inline void amd_set_dr_addr_mask(unsigned long mask, unsigned int dr) { }
+static inline unsigned long amd_get_dr_addr_mask(unsigned int dr)
+{
+ return 0;
+}
#endif
#endif /* _ASM_X86_DEBUGREG_H */
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 208c2ce8598a..380753b14cab 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -1158,24 +1158,43 @@ static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum)
return false;
}
-void set_dr_addr_mask(unsigned long mask, int dr)
+static DEFINE_PER_CPU_READ_MOSTLY(unsigned long[4], amd_dr_addr_mask);
+
+static unsigned int amd_msr_dr_addr_masks[] = {
+ MSR_F16H_DR0_ADDR_MASK,
+ MSR_F16H_DR1_ADDR_MASK,
+ MSR_F16H_DR1_ADDR_MASK + 1,
+ MSR_F16H_DR1_ADDR_MASK + 2
+};
+
+void amd_set_dr_addr_mask(unsigned long mask, unsigned int dr)
{
- if (!boot_cpu_has(X86_FEATURE_BPEXT))
+ int cpu = smp_processor_id();
+
+ if (!cpu_feature_enabled(X86_FEATURE_BPEXT))
return;
- switch (dr) {
- case 0:
- wrmsr(MSR_F16H_DR0_ADDR_MASK, mask, 0);
- break;
- case 1:
- case 2:
- case 3:
- wrmsr(MSR_F16H_DR1_ADDR_MASK - 1 + dr, mask, 0);
- break;
- default:
- break;
- }
+ if (WARN_ON_ONCE(dr >= ARRAY_SIZE(amd_msr_dr_addr_masks)))
+ return;
+
+ if (per_cpu(amd_dr_addr_mask, cpu)[dr] == mask)
+ return;
+
+ wrmsr(amd_msr_dr_addr_masks[dr], mask, 0);
+ per_cpu(amd_dr_addr_mask, cpu)[dr] = mask;
+}
+
+unsigned long amd_get_dr_addr_mask(unsigned int dr)
+{
+ if (!cpu_feature_enabled(X86_FEATURE_BPEXT))
+ return 0;
+
+ if (WARN_ON_ONCE(dr >= ARRAY_SIZE(amd_msr_dr_addr_masks)))
+ return 0;
+
+ return per_cpu(amd_dr_addr_mask[dr], smp_processor_id());
}
+EXPORT_SYMBOL_GPL(amd_get_dr_addr_mask);
u32 amd_get_highest_perf(void)
{
diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
index bbb0f737aab1..b01644c949b2 100644
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -127,7 +127,7 @@ int arch_install_hw_breakpoint(struct perf_event *bp)
set_debugreg(*dr7, 7);
if (info->mask)
- set_dr_addr_mask(info->mask, i);
+ amd_set_dr_addr_mask(info->mask, i);
return 0;
}
@@ -166,7 +166,7 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp)
set_debugreg(dr7, 7);
if (info->mask)
- set_dr_addr_mask(0, i);
+ amd_set_dr_addr_mask(0, i);
/*
* Ensure the write to cpu_dr7 is after we've set the DR7 register.
--
2.38.1
next prev parent reply other threads:[~2023-01-20 3:12 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-20 3:10 [PATCH kernel v3 0/3] KVM: SEV: Enable AMD SEV-ES DebugSwap Alexey Kardashevskiy
2023-01-20 3:10 ` Alexey Kardashevskiy [this message]
2023-01-31 19:27 ` [tip: x86/cpu] x86/amd: Cache debug register values in percpu variables tip-bot2 for Alexey Kardashevskiy
2023-01-20 3:10 ` [PATCH kernel v3 2/3] KVM: SEV: Enable data breakpoints in SEV-ES Alexey Kardashevskiy
2023-01-31 19:22 ` Borislav Petkov
2023-02-01 2:20 ` Sean Christopherson
2023-02-01 19:32 ` Sean Christopherson
2023-02-03 12:26 ` Borislav Petkov
2023-02-01 2:18 ` Sean Christopherson
2023-02-03 3:37 ` Alexey Kardashevskiy
2023-02-03 5:14 ` [PATCH kernel v4] " Alexey Kardashevskiy
2023-02-21 5:19 ` Alexey Kardashevskiy
2023-03-14 9:43 ` Alexey Kardashevskiy
2023-03-21 6:56 ` Alexey Kardashevskiy
2023-03-23 17:40 ` Sean Christopherson
2023-03-29 15:13 ` Tom Lendacky
2023-03-23 16:39 ` [PATCH kernel v3 2/3] " Sean Christopherson
2023-03-24 4:05 ` Alexey Kardashevskiy
2023-01-20 3:10 ` [PATCH kernel v3 3/3] x86/sev: Do not handle #VC for DR7 read/write Alexey Kardashevskiy
2023-01-20 5:12 ` Nikunj A. Dadhania
2023-01-20 10:23 ` Alexey Kardashevskiy
2023-01-20 12:06 ` Borislav Petkov
2023-01-25 3:11 ` Alexey Kardashevskiy
2023-01-25 5:44 ` Borislav Petkov
2023-01-24 10:37 ` Nikunj A. Dadhania
2023-01-24 12:37 ` Alexey Kardashevskiy
2023-01-24 13:17 ` Nikunj A. Dadhania
2023-01-30 0:56 ` [PATCH kernel v4 " Alexey Kardashevskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230120031047.628097-2-aik@amd.com \
--to=aik@amd.com \
--cc=Jason@zx2c4.com \
--cc=acme@redhat.com \
--cc=adrian.hunter@intel.com \
--cc=alexander.shishkin@linux.intel.com \
--cc=andrew.cooper3@citrix.com \
--cc=bp@alien8.de \
--cc=brijesh.singh@amd.com \
--cc=daniel.sneddon@linux.intel.com \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=jgross@suse.com \
--cc=keescook@chromium.org \
--cc=kim.phillips@amd.com \
--cc=kuba@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=michael.roth@amd.com \
--cc=mingo@redhat.com \
--cc=pawan.kumar.gupta@linux.intel.com \
--cc=pbonzini@redhat.com \
--cc=peterz@infradead.org \
--cc=sandipan.das@amd.com \
--cc=seanjc@google.com \
--cc=tglx@linutronix.de \
--cc=thomas.lendacky@amd.com \
--cc=tony.luck@intel.com \
--cc=venu.busireddy@oracle.com \
--cc=x86@kernel.org \
--cc=yury.norov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.