All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kees Cook <keescook@chromium.org>
To: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Kees Cook <keescook@chromium.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	linux-kernel@vger.kernel.org, linux-hardening@vger.kernel.org
Subject: [PATCH] regulator: max77802: Bounds check regulator id against opmode
Date: Fri, 27 Jan 2023 14:52:07 -0800	[thread overview]
Message-ID: <20230127225203.never.864-kees@kernel.org> (raw)

Explicitly bounds-check the id before accessing the opmode array. Seen
with GCC 13:

../drivers/regulator/max77802-regulator.c: In function 'max77802_enable':
../drivers/regulator/max77802-regulator.c:217:29: warning: array subscript [0, 41] is outside array bounds of 'unsigned int[42]' [-Warray-bounds=]
  217 |         if (max77802->opmode[id] == MAX77802_OFF_PWRREQ)
      |             ~~~~~~~~~~~~~~~~^~~~
../drivers/regulator/max77802-regulator.c:62:22: note: while referencing 'opmode'
   62 |         unsigned int opmode[MAX77802_REG_MAX];
      |                      ^~~~~~

Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
 drivers/regulator/max77802-regulator.c | 34 ++++++++++++++++++--------
 1 file changed, 24 insertions(+), 10 deletions(-)

diff --git a/drivers/regulator/max77802-regulator.c b/drivers/regulator/max77802-regulator.c
index 21e0eb0f43f9..befe5f319819 100644
--- a/drivers/regulator/max77802-regulator.c
+++ b/drivers/regulator/max77802-regulator.c
@@ -94,9 +94,11 @@ static int max77802_set_suspend_disable(struct regulator_dev *rdev)
 {
 	unsigned int val = MAX77802_OFF_PWRREQ;
 	struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
-	int id = rdev_get_id(rdev);
+	unsigned int id = rdev_get_id(rdev);
 	int shift = max77802_get_opmode_shift(id);
 
+	if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+		return -EINVAL;
 	max77802->opmode[id] = val;
 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				  rdev->desc->enable_mask, val << shift);
@@ -110,7 +112,7 @@ static int max77802_set_suspend_disable(struct regulator_dev *rdev)
 static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
 {
 	struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
-	int id = rdev_get_id(rdev);
+	unsigned int id = rdev_get_id(rdev);
 	unsigned int val;
 	int shift = max77802_get_opmode_shift(id);
 
@@ -127,6 +129,9 @@ static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
 		return -EINVAL;
 	}
 
+	if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+		return -EINVAL;
+
 	max77802->opmode[id] = val;
 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				  rdev->desc->enable_mask, val << shift);
@@ -135,8 +140,10 @@ static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
 static unsigned max77802_get_mode(struct regulator_dev *rdev)
 {
 	struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
-	int id = rdev_get_id(rdev);
+	unsigned int id = rdev_get_id(rdev);
 
+	if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+		return -EINVAL;
 	return max77802_map_mode(max77802->opmode[id]);
 }
 
@@ -160,10 +167,13 @@ static int max77802_set_suspend_mode(struct regulator_dev *rdev,
 				     unsigned int mode)
 {
 	struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
-	int id = rdev_get_id(rdev);
+	unsigned int id = rdev_get_id(rdev);
 	unsigned int val;
 	int shift = max77802_get_opmode_shift(id);
 
+	if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+		return -EINVAL;
+
 	/*
 	 * If the regulator has been disabled for suspend
 	 * then is invalid to try setting a suspend mode.
@@ -209,9 +219,11 @@ static int max77802_set_suspend_mode(struct regulator_dev *rdev,
 static int max77802_enable(struct regulator_dev *rdev)
 {
 	struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
-	int id = rdev_get_id(rdev);
+	unsigned int id = rdev_get_id(rdev);
 	int shift = max77802_get_opmode_shift(id);
 
+	if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+		return -EINVAL;
 	if (max77802->opmode[id] == MAX77802_OFF_PWRREQ)
 		max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
 
@@ -495,7 +507,7 @@ static int max77802_pmic_probe(struct platform_device *pdev)
 
 	for (i = 0; i < MAX77802_REG_MAX; i++) {
 		struct regulator_dev *rdev;
-		int id = regulators[i].id;
+		unsigned int id = regulators[i].id;
 		int shift = max77802_get_opmode_shift(id);
 		int ret;
 
@@ -513,10 +525,12 @@ static int max77802_pmic_probe(struct platform_device *pdev)
 		 * the hardware reports OFF as the regulator operating mode.
 		 * Default to operating mode NORMAL in that case.
 		 */
-		if (val == MAX77802_STATUS_OFF)
-			max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
-		else
-			max77802->opmode[id] = val;
+		if (id < ARRAY_SIZE(max77802->opmode)) {
+			if (val == MAX77802_STATUS_OFF)
+				max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
+			else
+				max77802->opmode[id] = val;
+		}
 
 		rdev = devm_regulator_register(&pdev->dev,
 					       &regulators[i], &config);
-- 
2.34.1


             reply	other threads:[~2023-01-27 22:52 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-27 22:52 Kees Cook [this message]
2023-01-28  7:22 ` [PATCH] regulator: max77802: Bounds check regulator id against opmode Javier Martinez Canillas
2023-01-28 17:19 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230127225203.never.864-kees@kernel.org \
    --to=keescook@chromium.org \
    --cc=broonie@kernel.org \
    --cc=javier@dowhile0.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-hardening@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.