All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johan Hovold <johan+linaro@kernel.org>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Bjorn Andersson <andersson@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Maximilian Luz <luzmaximilian@gmail.com>,
	linux-arm-msm@vger.kernel.org, linux-rtc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Johan Hovold <johan+linaro@kernel.org>
Subject: [PATCH v2 02/22] rtc: pm8xxx: drop spmi error messages
Date: Thu,  2 Feb 2023 16:54:28 +0100	[thread overview]
Message-ID: <20230202155448.6715-3-johan+linaro@kernel.org> (raw)
In-Reply-To: <20230202155448.6715-1-johan+linaro@kernel.org>

Drop the unnecessary error messages after every spmi regmap access,
which are not expected to fail.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/rtc/rtc-pm8xxx.c | 71 ++++++++++------------------------------
 1 file changed, 17 insertions(+), 54 deletions(-)

diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index d114f0da537d..f49bda999e02 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -105,10 +105,8 @@ static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
 		alarm_enabled = 1;
 		ctrl_reg &= ~regs->alarm_en;
 		rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
-		if (rc) {
-			dev_err(dev, "Write to RTC Alarm control register failed\n");
+		if (rc)
 			goto rtc_rw_fail;
-		}
 	}
 
 	/* Disable RTC H/w before writing on RTC register */
@@ -120,51 +118,39 @@ static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
 		rtc_disabled = 1;
 		rtc_ctrl_reg &= ~PM8xxx_RTC_ENABLE;
 		rc = regmap_write(rtc_dd->regmap, regs->ctrl, rtc_ctrl_reg);
-		if (rc) {
-			dev_err(dev, "Write to RTC control register failed\n");
+		if (rc)
 			goto rtc_rw_fail;
-		}
 	}
 
 	/* Write 0 to Byte[0] */
 	rc = regmap_write(rtc_dd->regmap, regs->write, 0);
-	if (rc) {
-		dev_err(dev, "Write to RTC write data register failed\n");
+	if (rc)
 		goto rtc_rw_fail;
-	}
 
 	/* Write Byte[1], Byte[2], Byte[3] */
 	rc = regmap_bulk_write(rtc_dd->regmap, regs->write + 1,
 			       &value[1], sizeof(value) - 1);
-	if (rc) {
-		dev_err(dev, "Write to RTC write data register failed\n");
+	if (rc)
 		goto rtc_rw_fail;
-	}
 
 	/* Write Byte[0] */
 	rc = regmap_write(rtc_dd->regmap, regs->write, value[0]);
-	if (rc) {
-		dev_err(dev, "Write to RTC write data register failed\n");
+	if (rc)
 		goto rtc_rw_fail;
-	}
 
 	/* Enable RTC H/w after writing on RTC register */
 	if (rtc_disabled) {
 		rtc_ctrl_reg |= PM8xxx_RTC_ENABLE;
 		rc = regmap_write(rtc_dd->regmap, regs->ctrl, rtc_ctrl_reg);
-		if (rc) {
-			dev_err(dev, "Write to RTC control register failed\n");
+		if (rc)
 			goto rtc_rw_fail;
-		}
 	}
 
 	if (alarm_enabled) {
 		ctrl_reg |= regs->alarm_en;
 		rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
-		if (rc) {
-			dev_err(dev, "Write to RTC Alarm control register failed\n");
+		if (rc)
 			goto rtc_rw_fail;
-		}
 	}
 
 rtc_rw_fail:
@@ -183,28 +169,22 @@ static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
 
 	rc = regmap_bulk_read(rtc_dd->regmap, regs->read, value, sizeof(value));
-	if (rc) {
-		dev_err(dev, "RTC read data register failed\n");
+	if (rc)
 		return rc;
-	}
 
 	/*
 	 * Read the LSB again and check if there has been a carry over.
 	 * If there is, redo the read operation.
 	 */
 	rc = regmap_read(rtc_dd->regmap, regs->read, &reg);
-	if (rc < 0) {
-		dev_err(dev, "RTC read data register failed\n");
+	if (rc < 0)
 		return rc;
-	}
 
 	if (unlikely(reg < value[0])) {
 		rc = regmap_bulk_read(rtc_dd->regmap, regs->read,
 				      value, sizeof(value));
-		if (rc) {
-			dev_err(dev, "RTC read data register failed\n");
+		if (rc)
 			return rc;
-		}
 	}
 
 	secs = value[0] | (value[1] << 8) | (value[2] << 16) |
@@ -241,10 +221,8 @@ static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 
 	rc = regmap_bulk_write(rtc_dd->regmap, regs->alarm_rw, value,
 			       sizeof(value));
-	if (rc) {
-		dev_err(dev, "Write to RTC ALARM register failed\n");
+	if (rc)
 		goto rtc_rw_fail;
-	}
 
 	if (alarm->enabled) {
 		rc = regmap_update_bits(rtc_dd->regmap, regs->alarm_ctrl,
@@ -271,10 +249,8 @@ static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 
 	rc = regmap_bulk_read(rtc_dd->regmap, regs->alarm_rw, value,
 			      sizeof(value));
-	if (rc) {
-		dev_err(dev, "RTC alarm time read failed\n");
+	if (rc)
 		return rc;
-	}
 
 	secs = value[0] | (value[1] << 8) | (value[2] << 16) |
 	       ((unsigned long)value[3] << 24);
@@ -282,10 +258,9 @@ static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	rtc_time64_to_tm(secs, &alarm->time);
 
 	rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
-	if (rc) {
-		dev_err(dev, "Read from RTC alarm control register failed\n");
+	if (rc)
 		return rc;
-	}
+
 	alarm->enabled = !!(ctrl_reg & PM8xxx_RTC_ALARM_ENABLE);
 
 	dev_dbg(dev, "Alarm set for - h:m:s=%ptRt, y-m-d=%ptRdr\n",
@@ -315,19 +290,15 @@ static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
 		ctrl_reg &= ~regs->alarm_en;
 
 	rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
-	if (rc) {
-		dev_err(dev, "Write to RTC control register failed\n");
+	if (rc)
 		goto rtc_rw_fail;
-	}
 
 	/* Clear Alarm register */
 	if (!enable) {
 		rc = regmap_bulk_write(rtc_dd->regmap, regs->alarm_rw, value,
 				       sizeof(value));
-		if (rc) {
-			dev_err(dev, "Clear RTC ALARM register failed\n");
+		if (rc)
 			goto rtc_rw_fail;
-		}
 	}
 
 rtc_rw_fail:
@@ -366,8 +337,6 @@ static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
 	rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
 	if (rc) {
 		spin_unlock(&rtc_dd->ctrl_reg_lock);
-		dev_err(rtc_dd->rtc_dev,
-			"Write to alarm control register failed\n");
 		goto rtc_alarm_handled;
 	}
 
@@ -375,17 +344,11 @@ static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
 
 	/* Clear RTC alarm register */
 	rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl2, &ctrl_reg);
-	if (rc) {
-		dev_err(rtc_dd->rtc_dev,
-			"RTC Alarm control2 register read failed\n");
+	if (rc)
 		goto rtc_alarm_handled;
-	}
 
 	ctrl_reg |= PM8xxx_RTC_ALARM_CLEAR;
 	rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl2, ctrl_reg);
-	if (rc)
-		dev_err(rtc_dd->rtc_dev,
-			"Write to RTC Alarm control2 register failed\n");
 
 rtc_alarm_handled:
 	return IRQ_HANDLED;
-- 
2.39.1


  parent reply	other threads:[~2023-02-02 15:55 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-02 15:54 [PATCH v2 00/22] rtc: pm8xxx: add support for setting time using nvmem Johan Hovold
2023-02-02 15:54 ` [PATCH v2 01/22] rtc: pm8xxx: fix set-alarm race Johan Hovold
2023-02-07  3:12   ` David Collins
2023-02-07 15:13     ` Johan Hovold
2023-02-07 15:56       ` Johan Hovold
2023-02-02 15:54 ` Johan Hovold [this message]
2023-02-02 15:54 ` [PATCH v2 03/22] rtc: pm8xxx: use regmap_update_bits() Johan Hovold
2023-02-07  3:14   ` David Collins
2023-02-02 15:54 ` [PATCH v2 04/22] rtc: pm8xxx: drop bogus locking Johan Hovold
2023-02-07  3:14   ` David Collins
2023-02-02 15:54 ` [PATCH v2 05/22] rtc: pm8xxx: return IRQ_NONE on errors Johan Hovold
2023-02-02 15:54 ` [PATCH v2 06/22] rtc: pm8xxx: drop unused register defines Johan Hovold
2023-02-07  3:15   ` David Collins
2023-02-07 15:16     ` Johan Hovold
2023-02-02 15:54 ` [PATCH v2 07/22] rtc: pm8xxx: use unaligned le32 helpers Johan Hovold
2023-02-07  3:15   ` David Collins
2023-02-02 15:54 ` [PATCH v2 08/22] rtc: pm8xxx: clean up time and alarm debugging Johan Hovold
2023-02-07  3:15   ` David Collins
2023-02-02 15:54 ` [PATCH v2 09/22] rtc: pm8xxx: rename struct device pointer Johan Hovold
2023-02-07  3:15   ` David Collins
2023-02-02 15:54 ` [PATCH v2 10/22] rtc: pm8xxx: rename alarm irq variable Johan Hovold
2023-02-07  3:15   ` David Collins
2023-02-02 15:54 ` [PATCH v2 11/22] rtc: pm8xxx: clean up comments Johan Hovold
2023-02-07  3:15   ` David Collins
2023-02-02 15:54 ` [PATCH v2 12/22] rtc: pm8xxx: use u32 for timestamps Johan Hovold
2023-02-02 15:54 ` [PATCH v2 13/22] rtc: pm8xxx: refactor read_time() Johan Hovold
2023-02-07  3:16   ` David Collins
2023-02-07 15:20     ` Johan Hovold
2023-02-02 15:54 ` [PATCH v2 14/22] rtc: pm8xxx: clean up local declarations Johan Hovold
2023-02-07  3:16   ` David Collins
2023-02-02 15:54 ` [PATCH v2 15/22] rtc: pm8xxx: drop error messages Johan Hovold
2023-02-02 15:54 ` [PATCH v2 16/22] dt-bindings: rtc: qcom-pm8xxx: add nvmem-cell offset Johan Hovold
2023-02-07  3:16   ` David Collins
2023-02-07 15:24     ` Johan Hovold
2023-02-10 22:48   ` Alexandre Belloni
2023-02-11  8:22     ` Johan Hovold
2023-02-11 16:44       ` Alexandre Belloni
2023-02-15 16:51         ` Johan Hovold
2023-02-24  8:21           ` Johan Hovold
2023-02-24  9:18             ` Alexandre Belloni
2023-02-24  9:24               ` Johan Hovold
2023-02-02 15:54 ` [PATCH v2 17/22] rtc: pm8xxx: add support for nvmem offset Johan Hovold
2023-02-03  3:31   ` Konrad Dybcio
2023-02-03  7:22     ` Johan Hovold
2023-02-07  3:16   ` David Collins
2023-02-07 15:36     ` Johan Hovold
2023-02-02 15:54 ` [PATCH v2 18/22] arm64: defconfig: enable Qualcomm SDAM nvmem driver Johan Hovold
2023-02-03  9:31   ` Krzysztof Kozlowski
2023-02-02 15:54 ` [PATCH v2 19/22] arm64: dts: qcom: sc8280xp-pmics: add pmk8280 rtc Johan Hovold
2023-02-02 15:54 ` [PATCH v2 20/22] arm64: dts: qcom: sc8280xp-pmics: add pmk8280 sdam nvram Johan Hovold
2023-02-02 15:54 ` [PATCH v2 21/22] arm64: dts: qcom: sc8280xp-crd: enable rtc Johan Hovold
2023-02-02 15:54 ` [PATCH v2 22/22] arm64: dts: qcom: sc8280xp-x13s: " Johan Hovold
2023-02-09  4:22 ` (subset) [PATCH v2 00/22] rtc: pm8xxx: add support for setting time using nvmem Bjorn Andersson
2023-02-09 22:25 ` Alexandre Belloni
2023-02-10  7:53   ` Johan Hovold
2023-02-10  9:04     ` Alexandre Belloni
2023-02-10  9:14       ` Johan Hovold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230202155448.6715-3-johan+linaro@kernel.org \
    --to=johan+linaro@kernel.org \
    --cc=a.zummo@towertech.it \
    --cc=agross@kernel.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andersson@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=luzmaximilian@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.