From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev,
Geert Uytterhoeven <geert+renesas@glider.be>,
Shawn Guo <shawnguo@kernel.org>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.15 03/20] arm64: dts: freescale: Fix pca954x i2c-mux node names
Date: Fri, 3 Feb 2023 11:13:30 +0100 [thread overview]
Message-ID: <20230203101008.150459646@linuxfoundation.org> (raw)
In-Reply-To: <20230203101007.985835823@linuxfoundation.org>
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit b025b4f5c288e29bbea421613a5b4eacf9261fbb ]
"make dtbs_check":
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: $nodename:0: 'pca9547@77' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@4' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts | 2 +-
arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 4 ++--
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 2 +-
12 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index e22c5e77fecd..9615f3b9ee60 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -110,7 +110,7 @@ &esdhc1 {
&i2c0 {
status = "okay";
- pca9547@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index fea167d222cf..14856bc79b22 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -70,7 +70,7 @@ fpga: board-control@2,0 {
&i2c0 {
status = "okay";
- pca9547@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index eec62c63dafe..9ee9928f71b4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -76,7 +76,7 @@ &duart1 {
&i2c0 {
status = "okay";
- pca9547@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 41d8b15f25a5..aa52ff73ff9e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -53,7 +53,7 @@ flash@2 {
&i2c0 {
status = "okay";
- i2c-switch@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 1bfbce69cc8b..ee8e932628d1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -136,7 +136,7 @@ mdio2_aquantia_phy: ethernet-phy@0 {
&i2c0 {
status = "okay";
- i2c-switch@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index d3f03dcbb8c3..a9c6682a3955 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -245,7 +245,7 @@ rx8035: rtc@32 {
&i2c3 {
status = "okay";
- i2c-switch@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9540";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index 10d2fe091965..8d96d18c3697 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -44,7 +44,7 @@ cpld@3,0 {
&i2c0 {
status = "okay";
- pca9547@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 4b71c4fcb35f..787e408da002 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -44,7 +44,7 @@ cpld@3,0 {
&i2c0 {
status = "okay";
- pca9547@75 {
+ i2c-mux@75 {
compatible = "nxp,pca9547";
reg = <0x75>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index afb455210bd0..d32a52ab00a4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -54,7 +54,7 @@ &esdhc1 {
&i2c0 {
status = "okay";
- i2c-switch@77 {
+ i2c-mux@77 {
compatible = "nxp,pca9547";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 74c09891600f..6357078185ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -214,7 +214,7 @@ &i2c3 {
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- i2cmux@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9540";
reg = <0x70>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index f70fb32b96b0..cf14ab5f7404 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -133,7 +133,7 @@ &i2c1 {
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- i2cmux@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9546";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_pca9546>;
@@ -216,7 +216,7 @@ &i2c4 {
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
- pca9546: i2cmux@70 {
+ pca9546: i2c-mux@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 863232a47004..4497763d57cc 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -61,7 +61,7 @@ &i2c1 {
pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
status = "okay";
- i2c-switch@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9646", "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;
--
2.39.0
next prev parent reply other threads:[~2023-02-03 10:23 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-03 10:13 [PATCH 5.15 00/20] 5.15.92-rc1 review Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 01/20] ARM: dts: imx: Fix pca9547 i2c-mux node name Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 02/20] ARM: dts: vf610: Fix pca9548 i2c-mux node names Greg Kroah-Hartman
2023-02-03 10:13 ` Greg Kroah-Hartman [this message]
2023-02-03 10:13 ` [PATCH 5.15 04/20] arm64: dts: imx8mq-thor96: fix no-mmc property for SDHCI Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 05/20] firmware: arm_scmi: Clear stale xfer->hdr.status Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 06/20] bpf: Skip task with pid=1 in send_signal_common() Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 07/20] erofs/zmap.c: Fix incorrect offset calculation Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 08/20] blk-cgroup: fix missing pd_online_fn() while activating policy Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 09/20] HID: playstation: sanity check DualSense calibration data Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 10/20] dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 11/20] cifs: fix return of uninitialized rc in dfs_cache_update_tgthint() Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 12/20] ext4: fix bad checksum after online resize Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 13/20] extcon: usbc-tusb320: fix kernel-doc warning Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 14/20] ACPI: processor idle: Practically limit "Dummy wait" workaround to old Intel systems Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 15/20] Bluetooth: fix null ptr deref on hci_sync_conn_complete_evt Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 16/20] tools: fix ARRAY_SIZE defines in tools and selftests hdrs Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 17/20] selftests/vm: remove ARRAY_SIZE define from individual tests Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 18/20] selftests: Provide local define of __cpuid_count() Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 19/20] net: fix NULL pointer in skb_segment_list Greg Kroah-Hartman
2023-02-03 10:13 ` [PATCH 5.15 20/20] net: mctp: purge receive queues on sk destruction Greg Kroah-Hartman
2023-02-03 20:03 ` [PATCH 5.15 00/20] 5.15.92-rc1 review Florian Fainelli
2023-02-04 0:53 ` Shuah Khan
2023-02-04 1:50 ` Guenter Roeck
2023-02-04 2:03 ` Bagas Sanjaya
2023-02-04 8:31 ` Naresh Kamboju
2023-02-04 8:55 ` Ron Economos
2023-02-06 7:12 ` Greg Kroah-Hartman
2023-02-06 8:56 ` Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230203101008.150459646@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=geert+renesas@glider.be \
--cc=patches@lists.linux.dev \
--cc=sashal@kernel.org \
--cc=shawnguo@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.