From: Saeed Mahameed <saeed@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>,
netdev@vger.kernel.org, Tariq Toukan <tariqt@nvidia.com>,
Dragos Tatulea <dtatulea@nvidia.com>,
Gal Pressman <gal@nvidia.com>
Subject: [net 05/10] net/mlx5e: IPoIB, Show unknown speed instead of error
Date: Tue, 7 Feb 2023 19:02:57 -0800 [thread overview]
Message-ID: <20230208030302.95378-6-saeed@kernel.org> (raw)
In-Reply-To: <20230208030302.95378-1-saeed@kernel.org>
From: Dragos Tatulea <dtatulea@nvidia.com>
ethtool is returning an error for unknown speeds for the IPoIB interface:
$ ethtool ib0
netlink error: failed to retrieve link settings
netlink error: Invalid argument
netlink error: failed to retrieve link settings
netlink error: Invalid argument
Settings for ib0:
Link detected: no
After this change, ethtool will return success and show "unknown speed":
$ ethtool ib0
Settings for ib0:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: no
Fixes: eb234ee9d541 ("net/mlx5e: IPoIB, Add support for get_link_ksettings in ethtool")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
.../net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c
index eff92dc0927c..e09518f887a0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c
@@ -189,16 +189,16 @@ static inline int mlx5_ptys_rate_enum_to_int(enum mlx5_ptys_rate rate)
}
}
-static int mlx5i_get_speed_settings(u16 ib_link_width_oper, u16 ib_proto_oper)
+static u32 mlx5i_get_speed_settings(u16 ib_link_width_oper, u16 ib_proto_oper)
{
int rate, width;
rate = mlx5_ptys_rate_enum_to_int(ib_proto_oper);
if (rate < 0)
- return -EINVAL;
+ return SPEED_UNKNOWN;
width = mlx5_ptys_width_enum_to_int(ib_link_width_oper);
if (width < 0)
- return -EINVAL;
+ return SPEED_UNKNOWN;
return rate * width;
}
@@ -221,16 +221,13 @@ static int mlx5i_get_link_ksettings(struct net_device *netdev,
ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising);
speed = mlx5i_get_speed_settings(ib_link_width_oper, ib_proto_oper);
- if (speed < 0)
- return -EINVAL;
+ link_ksettings->base.speed = speed;
+ link_ksettings->base.duplex = speed == SPEED_UNKNOWN ? DUPLEX_UNKNOWN : DUPLEX_FULL;
- link_ksettings->base.duplex = DUPLEX_FULL;
link_ksettings->base.port = PORT_OTHER;
link_ksettings->base.autoneg = AUTONEG_DISABLE;
- link_ksettings->base.speed = speed;
-
return 0;
}
--
2.39.1
next prev parent reply other threads:[~2023-02-08 3:03 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-08 3:02 [pull request][net 00/10] mlx5 fixes 2023-02-07 Saeed Mahameed
2023-02-08 3:02 ` [net 01/10] net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change Saeed Mahameed
2023-02-09 5:00 ` patchwork-bot+netdevbpf
2023-02-08 3:02 ` [net 02/10] net/mlx5: DR, Fix potential race in dr_rule_create_rule_nic Saeed Mahameed
2023-02-08 3:02 ` [net 03/10] net/mlx5: Bridge, fix ageing of peer FDB entries Saeed Mahameed
2023-02-08 3:02 ` [net 04/10] net/mlx5e: Fix crash unsetting rx-vlan-filter in switchdev mode Saeed Mahameed
2023-02-08 3:02 ` Saeed Mahameed [this message]
2023-02-08 3:02 ` [net 06/10] net/mlx5: Store page counters in a single array Saeed Mahameed
2023-02-08 3:02 ` [net 07/10] net/mlx5: Expose SF firmware pages counter Saeed Mahameed
2023-02-08 3:03 ` [net 08/10] net/mlx5: fw_tracer, Clear load bit when freeing string DBs buffers Saeed Mahameed
2023-02-08 3:03 ` [net 09/10] net/mlx5: fw_tracer, Zero consumer index when reloading the tracer Saeed Mahameed
2023-02-08 3:03 ` [net 10/10] net/mlx5: Serialize module cleanup with reload and remove Saeed Mahameed
2023-02-08 12:40 ` [pull request][net 00/10] mlx5 fixes 2023-02-07 Vadim Fedorenko
[not found] ` <DM5PR12MB134054EC92BC13E36B6C5711B3D89@DM5PR12MB1340.namprd12.prod.outlook.com>
2023-02-08 21:16 ` Rahul Rameshbabu
2023-02-08 21:36 ` Vadim Fedorenko
2023-02-08 23:52 ` Rahul Rameshbabu
2023-02-09 1:10 ` Vadim Fedorenko
2023-02-15 3:19 ` Rahul Rameshbabu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230208030302.95378-6-saeed@kernel.org \
--to=saeed@kernel.org \
--cc=davem@davemloft.net \
--cc=dtatulea@nvidia.com \
--cc=edumazet@google.com \
--cc=gal@nvidia.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=saeedm@nvidia.com \
--cc=tariqt@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.