From: Taichi Nishimura <awkrail01@gmail.com>
To: andrii@kernel.org, mykolal@fb.com, ast@kernel.org,
daniel@iogearbox.net, martin.lau@linux.dev, song@kernel.org,
yhs@fb.com, john.fastabend@gmail.com, kpsingh@kernel.org,
sdf@google.com, haoluo@google.com, jolsa@kernel.org,
shuah@kernel.org, davem@davemloft.net, kuba@kernel.org,
hawk@kernel.org, nathan@kernel.org, ndesaulniers@google.com,
trix@redhat.com, awkrail01@gmail.com, iii@linux.ibm.com,
ytcoode@gmail.com, deso@posteo.net, memxor@gmail.com,
joannelkoong@gmail.com, rdunlap@infradead.org
Cc: bpf@vger.kernel.org, linux-kselftest@vger.kernel.org,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
llvm@lists.linux.dev
Subject: [PATCH bpf-next] Fix typos in selftest/bpf files
Date: Thu, 16 Feb 2023 17:55:37 +0900 [thread overview]
Message-ID: <20230216085537.519062-1-awkrail01@gmail.com> (raw)
Run spell checker on files in selftest/bpf and fixed typos.
Signed-off-by: Taichi Nishimura <awkrail01@gmail.com>
---
tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c | 2 +-
tools/testing/selftests/bpf/prog_tests/trampoline_count.c | 2 +-
.../testing/selftests/bpf/progs/btf_dump_test_case_syntax.c | 2 +-
tools/testing/selftests/bpf/progs/dynptr_fail.c | 2 +-
tools/testing/selftests/bpf/progs/strobemeta.h | 2 +-
tools/testing/selftests/bpf/progs/test_cls_redirect.c | 6 +++---
tools/testing/selftests/bpf/progs/test_subprogs.c | 2 +-
tools/testing/selftests/bpf/progs/test_xdp_vlan.c | 2 +-
tools/testing/selftests/bpf/test_cpp.cpp | 2 +-
tools/testing/selftests/bpf/veristat.c | 4 ++--
10 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c b/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c
index eb2feaac81fe..653b0a20fab9 100644
--- a/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c
+++ b/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c
@@ -488,7 +488,7 @@ static void run_test(struct migrate_reuseport_test_case *test_case,
goto close_servers;
}
- /* Tie requests to the first four listners */
+ /* Tie requests to the first four listeners */
err = start_clients(test_case);
if (!ASSERT_OK(err, "start_clients"))
goto close_clients;
diff --git a/tools/testing/selftests/bpf/prog_tests/trampoline_count.c b/tools/testing/selftests/bpf/prog_tests/trampoline_count.c
index 8fd4c0d78089..e91d0d1769f1 100644
--- a/tools/testing/selftests/bpf/prog_tests/trampoline_count.c
+++ b/tools/testing/selftests/bpf/prog_tests/trampoline_count.c
@@ -79,7 +79,7 @@ void serial_test_trampoline_count(void)
if (!ASSERT_EQ(link, NULL, "ptr_is_null"))
goto cleanup;
- /* and finaly execute the probe */
+ /* and finally execute the probe */
prog_fd = bpf_program__fd(prog);
if (!ASSERT_GE(prog_fd, 0, "bpf_program__fd"))
goto cleanup;
diff --git a/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c b/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c
index 26fffb02ed10..ad21ee8c7e23 100644
--- a/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c
+++ b/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c
@@ -84,7 +84,7 @@ typedef void (*printf_fn_t)(const char *, ...);
* typedef int (*fn_t)(int);
* typedef char * const * (*fn_ptr2_t)(s_t, fn_t);
*
- * - `fn_complext_t`: pointer to a function returning struct and accepting
+ * - `fn_complex_t`: pointer to a function returning struct and accepting
* union and struct. All structs and enum are anonymous and defined inline.
*
* - `signal_t: pointer to a function accepting a pointer to a function as an
diff --git a/tools/testing/selftests/bpf/progs/dynptr_fail.c b/tools/testing/selftests/bpf/progs/dynptr_fail.c
index 5950ad6ec2e6..aa5b69354b91 100644
--- a/tools/testing/selftests/bpf/progs/dynptr_fail.c
+++ b/tools/testing/selftests/bpf/progs/dynptr_fail.c
@@ -630,7 +630,7 @@ static int release_twice_callback_fn(__u32 index, void *data)
}
/* Test that releasing a dynptr twice, where one of the releases happens
- * within a calback function, fails
+ * within a callback function, fails
*/
SEC("?raw_tp")
__failure __msg("arg 1 is an unacquired reference")
diff --git a/tools/testing/selftests/bpf/progs/strobemeta.h b/tools/testing/selftests/bpf/progs/strobemeta.h
index 753718595c26..e562be6356f3 100644
--- a/tools/testing/selftests/bpf/progs/strobemeta.h
+++ b/tools/testing/selftests/bpf/progs/strobemeta.h
@@ -135,7 +135,7 @@ struct strobe_value_loc {
* tpidr_el0 for aarch64).
* TLS_IMM_EXEC: absolute address of GOT entry containing offset
* from thread pointer;
- * TLS_GENERAL_DYN: absolute addres of double GOT entry
+ * TLS_GENERAL_DYN: absolute address of double GOT entry
* containing tls_index_t struct;
*/
int64_t offset;
diff --git a/tools/testing/selftests/bpf/progs/test_cls_redirect.c b/tools/testing/selftests/bpf/progs/test_cls_redirect.c
index 2833ad722cb7..66b304982245 100644
--- a/tools/testing/selftests/bpf/progs/test_cls_redirect.c
+++ b/tools/testing/selftests/bpf/progs/test_cls_redirect.c
@@ -600,7 +600,7 @@ static INLINING ret_t get_next_hop(buf_t *pkt, encap_headers_t *encap,
return TC_ACT_SHOT;
}
- /* Skip the remainig next hops (may be zero). */
+ /* Skip the remaining next hops (may be zero). */
return skip_next_hops(pkt, encap->unigue.hop_count -
encap->unigue.next_hop - 1);
}
@@ -610,8 +610,8 @@ static INLINING ret_t get_next_hop(buf_t *pkt, encap_headers_t *encap,
*
* fill_tuple(&t, foo, sizeof(struct iphdr), 123, 321)
*
- * clang will substitue a costant for sizeof, which allows the verifier
- * to track it's value. Based on this, it can figure out the constant
+ * clang will substitute a constant for sizeof, which allows the verifier
+ * to track its value. Based on this, it can figure out the constant
* return value, and calling code works while still being "generic" to
* IPv4 and IPv6.
*/
diff --git a/tools/testing/selftests/bpf/progs/test_subprogs.c b/tools/testing/selftests/bpf/progs/test_subprogs.c
index f8e9256cf18d..a8d602d7c88a 100644
--- a/tools/testing/selftests/bpf/progs/test_subprogs.c
+++ b/tools/testing/selftests/bpf/progs/test_subprogs.c
@@ -47,7 +47,7 @@ static __noinline int sub5(int v)
return sub1(v) - 1; /* compensates sub1()'s + 1 */
}
-/* unfortunately verifier rejects `struct task_struct *t` as an unkown pointer
+/* unfortunately verifier rejects `struct task_struct *t` as an unknown pointer
* type, so we need to accept pointer as integer and then cast it inside the
* function
*/
diff --git a/tools/testing/selftests/bpf/progs/test_xdp_vlan.c b/tools/testing/selftests/bpf/progs/test_xdp_vlan.c
index cdf3c48d6cbb..4ddcb6dfe500 100644
--- a/tools/testing/selftests/bpf/progs/test_xdp_vlan.c
+++ b/tools/testing/selftests/bpf/progs/test_xdp_vlan.c
@@ -98,7 +98,7 @@ bool parse_eth_frame(struct ethhdr *eth, void *data_end, struct parse_pkt *pkt)
return true;
}
-/* Hint, VLANs are choosen to hit network-byte-order issues */
+/* Hint, VLANs are chosen to hit network-byte-order issues */
#define TESTVLAN 4011 /* 0xFAB */
// #define TO_VLAN 4000 /* 0xFA0 (hint 0xOA0 = 160) */
diff --git a/tools/testing/selftests/bpf/test_cpp.cpp b/tools/testing/selftests/bpf/test_cpp.cpp
index 0bd9990e83fa..f4936834f76f 100644
--- a/tools/testing/selftests/bpf/test_cpp.cpp
+++ b/tools/testing/selftests/bpf/test_cpp.cpp
@@ -91,7 +91,7 @@ static void try_skeleton_template()
skel.detach();
- /* destructor will destory underlying skeleton */
+ /* destructor will destroy underlying skeleton */
}
int main(int argc, char *argv[])
diff --git a/tools/testing/selftests/bpf/veristat.c b/tools/testing/selftests/bpf/veristat.c
index f961b49b8ef4..83231456d3c5 100644
--- a/tools/testing/selftests/bpf/veristat.c
+++ b/tools/testing/selftests/bpf/veristat.c
@@ -144,7 +144,7 @@ static struct env {
struct verif_stats *prog_stats;
int prog_stat_cnt;
- /* baseline_stats is allocated and used only in comparsion mode */
+ /* baseline_stats is allocated and used only in comparison mode */
struct verif_stats *baseline_stats;
int baseline_stat_cnt;
@@ -882,7 +882,7 @@ static int process_obj(const char *filename)
* that BPF object file is incomplete and has to be statically
* linked into a final BPF object file; instead of bailing
* out, report it into stderr, mark it as skipped, and
- * proceeed
+ * proceed
*/
fprintf(stderr, "Failed to open '%s': %d\n", filename, -errno);
env.files_skipped++;
--
2.25.1
next reply other threads:[~2023-02-16 8:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-16 8:55 Taichi Nishimura [this message]
2023-02-16 16:58 ` [PATCH bpf-next] Fix typos in selftest/bpf files Randy Dunlap
2023-02-17 1:00 ` patchwork-bot+netdevbpf
-- strict thread matches above, loose matches on Subject: below --
2023-02-16 8:04 Taichi Nishimura
2023-02-16 8:16 ` Greg KH
2023-02-16 8:30 ` Randy Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230216085537.519062-1-awkrail01@gmail.com \
--to=awkrail01@gmail.com \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=deso@posteo.net \
--cc=haoluo@google.com \
--cc=hawk@kernel.org \
--cc=iii@linux.ibm.com \
--cc=joannelkoong@gmail.com \
--cc=john.fastabend@gmail.com \
--cc=jolsa@kernel.org \
--cc=kpsingh@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=llvm@lists.linux.dev \
--cc=martin.lau@linux.dev \
--cc=memxor@gmail.com \
--cc=mykolal@fb.com \
--cc=nathan@kernel.org \
--cc=ndesaulniers@google.com \
--cc=netdev@vger.kernel.org \
--cc=rdunlap@infradead.org \
--cc=sdf@google.com \
--cc=shuah@kernel.org \
--cc=song@kernel.org \
--cc=trix@redhat.com \
--cc=yhs@fb.com \
--cc=ytcoode@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.