From: Angelo Compagnucci <angelo.compagnucci@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Angelo Compagnucci <angelo@amarulasolutions.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-pwm@vger.kernel.org (open list:GENERIC PWM SERVO DRIVER),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v3 3/3] dt-bindings: misc: servo-pwm: Add new bindings for servo-pwm
Date: Fri, 17 Feb 2023 17:10:37 +0100 [thread overview]
Message-ID: <20230217161038.3130053-3-angelo@amarulasolutions.com> (raw)
In-Reply-To: <20230217161038.3130053-1-angelo@amarulasolutions.com>
This binding describes the binding for controlling servo motors through
pwm.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
---
v2:
* Converted old txt to yaml
v3:
* Fixed errors rised by make dt_binding_check
.../devicetree/bindings/misc/servo-pwm.yaml | 57 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 58 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/servo-pwm.yaml
diff --git a/Documentation/devicetree/bindings/misc/servo-pwm.yaml b/Documentation/devicetree/bindings/misc/servo-pwm.yaml
new file mode 100644
index 000000000000..73e81b939daf
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/servo-pwm.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/servo-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Servo motor connected to PWM
+
+maintainers:
+ - Angelo Compagnucci <angelo@amarulasolutions.com>
+
+description:
+ Each servo is represented as a servo-pwm device.
+ The 20ms period is the accepted standard and so most of the motors
+ support it, while the positioning min/max duty cycle or the motor
+ degrees aperture vary lot between manufacturers.
+ The most common type of servo (SG90) has 180 degrees of movement
+ and moves between 0.5ms and 2.5ms duty cycle.
+
+properties:
+ compatible:
+ const: servo-pwm
+
+ pwms:
+ maxItems: 1
+
+ pwm-names: true
+
+ degrees:
+ description:
+ How many degrees the motor can move.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ duty-min:
+ description:
+ Duty cycle for position the motor at 0 degrees.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ duty-max:
+ description:
+ Duty cycle for positioning the motor at "degrees" angle.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: false
+
+examples:
+ - |
+
+ servo: servo@0 {
+ compatible = "servo-pwm";
+ pwms = <&pwm 0 20000000 0>;
+ degrees = <180>;
+ duty-min = <500000>;
+ duty-max = <2500000>;
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 356daea0861d..8f41daee62fc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8742,6 +8742,7 @@ M: "Angelo Compagnucci" <angelo@amarulasolutions.com>
L: linux-pwm@vger.kernel.org
S: Maintained
F: Documentation/ABI/testing/sysfs-driver-servo-pwm
+F: Documentation/devicetree/bindings/misc/servo-pwm.yaml
F: drivers/misc/servo-pwm.c
GENERIC RESISTIVE TOUCHSCREEN ADC DRIVER
--
2.34.1
next prev parent reply other threads:[~2023-02-17 16:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-17 16:10 [PATCH v3 1/3] misc: servo-pwm: driver for controlling servo motors via PWM Angelo Compagnucci
2023-02-17 16:10 ` [PATCH v3 2/3] misc: servo-pwm: Add sysfs entries to control motor angle Angelo Compagnucci
2023-02-17 16:10 ` Angelo Compagnucci [this message]
2023-02-17 17:29 ` [PATCH v3 3/3] dt-bindings: misc: servo-pwm: Add new bindings for servo-pwm Rob Herring
2023-02-18 10:16 ` Krzysztof Kozlowski
2023-02-17 21:12 ` [PATCH v3 1/3] misc: servo-pwm: driver for controlling servo motors via PWM kernel test robot
2023-02-17 21:22 ` kernel test robot
2023-02-20 11:40 ` Thierry Reding
2023-02-20 11:46 ` Angelo Compagnucci
2023-07-15 19:17 ` Uwe Kleine-König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230217161038.3130053-3-angelo@amarulasolutions.com \
--to=angelo.compagnucci@gmail.com \
--cc=angelo@amarulasolutions.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.